Page 51 / 77
Scroll up to view Page 46 - 50
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
43
Remote ID Type
Remote ID
Click to select
IP
,
DNS
or
E-mail
as remote exchange
type
Fill in remote ID except IP selected
Screen snapshot – VPN Setup-Edit-2
Item
Description
Key Management
Click to select
IKE
or
Manual
mode.
Advanced
Click
Advanced
button to configure more IKE settings.
Connection Type
Click to select
Initiator
or
Responder
mode.
Connect
Click to connect manually.
[Responder mode only]
Disconnect
Click to disconnect manually.
[Responder mode only]
.
ESP
Click to configure
3DES
,
AES128
or
NULL
encryption.
Click to configure
MD5
or
SHA1
authentication.
PreShared Key
Fill in the key value.
[IKE mode only]
Remote RSA Key
Fill in the remote gateway RSA key.
[IKE mode only]
Status
It shows connection status.
[IKE mode only]
SPI
Fill in Security Parameter Index value.
[Manual mode
only]
Encryption Key
Fill in encryption key.
[Manual mode only]
Authentication Key
Fill in authentication key.
[Manual mode only]
Apply Change
Click the
Apply Changes
button to save current tunnel
settings.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
Refresh
It shows the current connection status.
[Manual mode
only]
Back
It returns back to VPN Setup page.
Page 52 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
44
II
Advanced IKE Setup
Screen snapshot – Advanced VPN Settings for IKE
Item
Description
Phase 1
Negotiation Mode
Main mode.
Encryption Algorithm
Click to select
3DES
or
AES128
encryption.
Authentication
Algorithm
Click to select
MD5
or
SHA1
authentication.
Key Group
Click to select
DH1(modp768)
,
DH2(modp1024)
or
DH5(modp1536)
key group. Default value is DH2
Key Life Time
Fill in the key life time value by seconds.
Page 53 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
45
Phase 2
Active Protocol
ESP.
Encryption Algorithm
Click to select
3DES
,
AES128
or
NULL
encryption.
Authentication
Algorithm
Click to select
MD5
or
SHA1
authentication.
Key Life Time
Fill in the key life time value by seconds.
Encapsulation
Tunnel mode.
Perfect Forward
Secrecy (PFS)
Click to select
ON
or
NONE
.
Ok
Click the
Ok
button to save current tunnel settings.
Cancel
Click the
Cancel
button to close current window without
any changes.
3.3.19
Management - Statistics
This page shows the packet counters for transmission and reception regarding
to wireless, Ethernet LAN and Ethernet WAN networks.
Screen snapshot – Management - Statistics
Item
Description
Wireless LAN
Sent Packets
It shows the statistic count of sent packets on the wireless
LAN interface.
Wireless LAN
Received Packets
It shows the statistic count of received packets on the
wireless LAN interface.
Ethernet LAN
Sent Packets
It shows the statistic count of sent packets on the
Ethernet LAN interface.
Page 54 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
46
Ethernet LAN
Received Packets
It shows the statistic count of received packets on the
Ethernet LAN interface.
Ethernet WAN
Sent Packets
It shows the statistic count of sent packets on the
Ethernet WAN interface.
Ethernet WAN
Received Packets
It shows the statistic count of received packets on the
Ethernet WAN interface.
Refresh
Click the refresh the statistic counters on the screen.
3.3.20
Management - DDNS
This page is used to configure Dynamic DNS service to have DNS with
dynamic IP address.
Screen snapshot – Management – DDNS
Item
Description
Enable DDNS
Click the checkbox to enable
DDNS
service. Refer to
4.25 What is DDNS?
Service Provider
Click the drop down menu to pickup the right provider.
Domain Name
To configure the Domain Name.
User Name/Email
Configure User Name, Email.
Password/Key
Configure Password, Key.
Apply Change
Click the
Apply Changes
button to save the enable
DDNS service.
Reset
Click the
Reset
button to abort change and recover the
Page 55 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
47
previous configuration setting.
3.3.21
Management - Time Zone Setting
This page is used to configure NTP client to get current time.
Screen snapshot – Management – Time Zone Settings
Item
Description
Current Time
It shows the current time.
Time Zone Select
Click the time zone in your country.
Enable NTP client
update
Click the checkbox to enable NTP client update. Refer to
4.26 What is NTP Client?
NTP Server
Click select default or input NTP server IP address.
Apply Change
Click the
Apply Changes
button to save and enable NTP
client service.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
Refresh
Click the refresh the current time shown on the screen.
3.3.22
Management – Denial-of-Service
This page is used to enable and setup protection to prevent attack by hacker’s
program. It provides more security for users.
19216811.live