Page 56 / 77
Scroll up to view Page 51 - 55
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
48
Screen snapshot – Management – Denial-of-Service
Item
Description
Enable DoS Prevention
Click the checkbox to enable DoS prevention.
Whole System Flood /
Per-Source IP Flood…
Enable and setup prevention in details.
Select ALL
Click the checkbox to enable all prevention items.
Clear ALL
Click the checkbox to disable all prevention items.
Apply Changes
Click the
Apply Changes
button to save above settings.
3.3.23
Management - Log
This page is used to configure the remote log server and shown the current log.
Page 57 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
49
Screen snapshot – Management – Log
Item
Description
Enable Log
System all
Wirelessy
DoS
Click the checkbox to enable log.
Show all log of wireless broadband router
Only show wireless log
Only show Denial-of-Service log
Enable Remote Log
Log Server IP Address
Click the checkbox to enable remote log service.
Input the remote log IP address
Apply Changes
Click the
Apply Changes
button to save above settings.
Refresh
Click the refresh the log shown on the screen.
Clear
Clear log display screen
3.3.24
Management - Upgrade Firmware
This page allows you upgrade the Access Point firmware to new version.
Please note, do not power off the device during the upload because it may
crash the system.
Page 58 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
50
Screen snapshot – Management - Upgrade Firmware
Item
Description
Select File
Click the
Browse
button to select the new version of web
firmware image file.
Upload
Click the
Upload
button to update the selected web
firmware image to the WLAN Broadband Router.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
3.3.25
Management Save/ Reload Settings
This page allows you save current settings to a file or reload the settings from
the file that was saved previously. Besides, you could reset the current
configuration to factory default.
Screen snapshot – Management - Save/Reload Settings
Item
Description
Save Settings to File
Click the
Save
button to download the configuration
parameters to your personal computer.
Load Settings from File Click the
Browse
button to select the configuration files
then click the
Upload
button to update the selected
Page 59 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
51
configuration to the WLAN Broadband Router.
Reset Settings to
Default
Click the
Reset
button to reset the configuration
parameter to factory defaults.
3.3.26
Management - Password Setup
This page is used to set the account to access the web server of Access Point.
Empty user name and password will disable the protection.
+
Screen snapshot – Management - Password Setup
Item
Description
User Name
Fill in the user name for web management login control.
New Password
Fill in the password for web management login control.
Confirmed Password
Because the password input is invisible, so please fill in
the password again for confirmation purpose.
Apply Changes
Clear the
User Name
and
Password
fields to empty,
means to apply no web management login control.
Click the
Apply Changes
button to complete the new
configuration setting.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
3.3.27
Management - WatchDog
This page is used to do watchdog function using ping command. User set IP
address, interval and ping fail count conditions to decide whether router
reboots or not.
Page 60 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
52
Screen snapshot – Management – WatchDog Settiing
Item
Description
Enable WatchDog
Click to enable watchdog.
WatchDog IP Address
IP address that is referred.
Ping Interval
Fill in the value by seconds.
Ping Fail to reboot
Count
Fill in the value that is the threshold to reboot router
when ping fails.
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
3.3.28
Management - Quality of Service
This page is used to do bandwidth control by ip address. User sets total and
undefined bandwidth first. Then set bandwidth by range of ip addresses.
19216811.live