Page 61 / 77 Scroll up to view Page 56 - 60
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
53
Screen snapshot – Management – Qaulity of Service
Item
Description
Enable QoS
Click to enable QoS.
ISP Bandwidth
Download
Fill in the value that is the download stream from ISP by
KB/s.
Upload
Fill in the value that is the upload stream from ISP by
KB/s.
Undef IP Bandwidth
Download
Define the download bandwidth that is not defined.
Upload
Define the upload bandwidth that is not defined.
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
Item
Description
Bandwidth Control
Page 62 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
54
IP Address Range
Set start and end ip address.
Guarantee Bandwidth
Download
Fill in the value by KB/s.
Upload
Fill in the value by KB/s.
Piority
Click to pick
High
,
Medium
or
Low
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting. It is added into
Current
Bandwidth Control Table
.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
Delete Selected
Click to delete the selected ip addresses that will be
removed from the
Current Bandwidth Control Table
.
Delete All
Click to delete all the registered entries from the ip
addresses
Current Bandwidth Control Table
.
Reset
Click the
Reset
button to abort change and recover the
previous configuration setting.
3.3.29
Logout
This page is used to logout web management page. This item will be activated
next time you login after you define user account and password.
Screen snapshot – Logout
Screen snapshot – Logout - OK
Item
Description
Page 63 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
55
Apply Change
Click the
Apply Change
button, Then click
OK
button to
logout.
Page 64 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
56
4
Frequently Asked Questions (FAQ)
4.1
What and how to find my PC’s IP and MAC address?
IP address is the identifier for a computer or device on a TCP/IP network. Networks
using the TCP/IP protocol route messages based on the IP address of the destination.
The format of an IP address is a 32-bit numeric address written as four numbers
separated by periods. Each number can be zero to 255. For example, 191.168.1.254
could be an IP address.
The MAC (Media Access Control) address is your computer's unique hardware number.
(On an Ethernet LAN, it's the same as your Ethernet address.) When you're connected to
the Internet from your computer (or host as the Internet protocol thinks of it), a
correspondence table relates your IP address to your computer's physical (MAC) address
on the LAN.
To find your PC’s IP and MAC address,
9
Open the Command program in the Microsoft Windows.
9
Type in
ipconfig /all
then press the
Enter
button.
¾
Your PC’s IP address is the one entitled IP Address and your PC’s MAC address is
the one entitled Physical Address.
4.2
What is Wireless LAN?
A wireless LAN (WLAN) is a network that allows access to Internet without the need
for any wired connections to the user’s machine.
4.3
What are ISM bands?
ISM stands for Industrial, Scientific and Medical; radio frequency bands that the Federal
Communications Commission (FCC) authorized for wireless LANs. The ISM bands are
located at 915 +/- 13 MHz, 2450 +/- 50 MHz and 5800 +/- 75 MHz.
4.4
How does wireless networking work?
The 802.11 standard define two modes: infrastructure mode and ad hoc mode. In
infrastructure mode, the wireless network consists of at least one access point connected
to the wired network infrastructure and a set of wireless end stations. This configuration
is called a Basic Service Set (BSS). An Extended Service Set (ESS) is a set of two or
more BSSs forming a single subnetwork. Since most corporate WLANs require access
Page 65 / 77
USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 2.1
57
to the wired LAN for services (file servers, printers, Internet links) they will operate in
infrastructure mode.
Example 1: wireless Infrastructure Mode
Ad hoc mode (also called peer-to-peer mode or an Independent Basic Service Set, or
IBSS) is simply a set of 802.11 wireless stations that communicate directly with one
another without using an access point or any connection to a wired network. This mode
is useful for quickly and easily setting up a wireless network anywhere that a wireless
infrastructure does not exist or is not required for services, such as a hotel room,
convention center, or airport, or where access to the wired network is barred (such as for
consultants at a client site).
Example 2: wireless Ad Hoc Mode
4.5
What is BSSID?
A six-byte address that distinguishes a particular a particular access point from others.
Also know as just SSID. Serves as a network ID or name.
4.6
What is ESSID?
The Extended Service Set ID (ESSID) is the name of the network you want to access. It
is used to identify different wireless networks.

Rate

3.5 / 5 based on 2 votes.

Popular RadioLabs Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top