Page 41 / 234
Scroll up to view Page 36 - 40
USER MANUAL
Peplink Balance Series
-41 / 234 -
Copyright © 2014 Peplink
6.11.3 Rear Panel Appearance
Connector Ports
RS-232 Port
Reserved for engineering use
Power Connector
AC input 110/220V
Switches
Power Switch
Pressing and holding the key for 4 seconds will power down the unit.
When the unit is powered off, pressing this switch will power on the unit.
Reset Switch
Press and release once to reset the system.
6.11.4 Unit Label Appearance
RS-232 Port
Power Connector
Power Switch
Reset Switch
Serial Number and
LAN MAC Address
Page 42 / 234
USER MANUAL
Peplink Balance Series
-42 / 234 -
Copyright © 2014 Peplink
6.12
Peplink Balance 1350
6.12.1 Front Panel Appearance
Status indicated in the front panel is as follows:
LAN Port, WAN 1
–
13 Ports
Right LED
ORANGE
–
1000 Mbps
GREEN
–
100 Mbps
OFF
–
10 Mbps
Left LED
Solid
–
Port is connected without traffic
Blinking
–
Data is transferring
OFF
–
Port is not connected
Port Type
Auto MDI/MDI-X ports
LED Indicator
Power LED
OFF
–
Power off
GREEN
–
Power on
Console & USB Ports
Console Port
Reserved for engineering use
USB Ports
For connecting a 4G/3G USB modem
Console Port
LCD Controls
LAN Port
WAN Ports
Power LED
LCD Display
USB Ports
Page 43 / 234
USER MANUAL
Peplink Balance Series
-43 / 234 -
Copyright © 2014 Peplink
6.12.2
LCD Display Menu
> HA State: Master/Slave
>LAN IP
> VIP
> System Status
> System
> Firmware ver.
(shows firmware version)
> Serial number
(shows serial number)
> System time
(shows current time)
> System up time
(shows system uptime since last reboot)
> CPU load
(shows current CPU loading, 0-100%)
> LAN
> Status
(shows LAN port physical status)
> IP address
(shows LAN IP address)
> Subnet mask
(shows LAN subnet mask)
> Link status
(shows Connected/Disconnected, IP address list)
> WAN1
> WAN2
> …
> WAN13
> VPN status
(shows Connected/Disconnected)
>
VPN Profile 1
>
VPN Profile 2
>
…
>
VPN Profile n
> Link usage
> Throughput in
(shows transfer rate in Kbps)
> WAN1
> WAN2
> …
> WAN13
> Throughput out
(shows transfer rate in Kbps)
> WAN1
> WAN2
> …
> WAN13
> Data Transfer’d
(shows volume transferred since last reboot in MB)
> WAN1
> WAN2
> …
> WAN13
> Maintenance
> Reboot
> Reboot? (Yes/No)
(to reboot the unit)
> Factory default > Factory default? (Yes/No)
(to restore factory defaults)
> LAN config
> Port speed
(shows port speed: Auto, 10baseT-FD, 10baseT-HD,
> LAN
100baseTx-FD, 100baseTx-HD,1000baseTx-FD)
> WAN1
> WAN2
> …
> WAN13
Page 44 / 234
USER MANUAL
Peplink Balance Series
-44 / 234 -
Copyright © 2014 Peplink
6.12.3 Rear Panel Appearance
Connector Ports
Power Connector
AC input 110/220V
Switches
Power Switch
Pressing and holding the key for 4 seconds will power down the unit.
When the unit is powered off, pressing this switch will power on the unit.
6.12.4 Unit Label Appearance
Power Connector
Power Switch
Serial Number and
LAN MAC Address
Page 45 / 234
USER MANUAL
Peplink Balance Series
-45 / 234 -
Copyright © 2014 Peplink
6.13
Peplink Balance 2500
6.13.1 Front Panel Appearance
BPL-2500
BPL-2500-SFP
Console Port
LCD Controls
Power LED
LCD Display
WAN Ports
LAN Port
USB Ports
Console Port
LCD Controls
Power LED
LCD Display
WAN Ports
LAN Port
USB Port
19216811.live