25

STEP 1.

Select your country from the

Country

list and the ADSL service provider from the

ISP

List (If there

are more than two ISP in your country) and note the

“Encapsulation”

type and

“VPI/VCI”

setting.

The

“Encapsulation”

type differs in each country and there are two different kinds of setup

windows wizard that will pop-up:

!

Click “Config” if you can’t find any available parameters from the

presetting country list.

Check your ISP immediately for the setting/configuration details.

26

A.

For the following

“Encapsulation”

type after clicking the

“Next”

button, the pop-up setup window

wizard is shown below:

;

PPPoA VC-Mux

;

PPPoA LLC

;

PPPoE LLC

Manually enter your

“User Name”

and

“Password”

which will be provided by your Service

Provider (ISP). Click

“Apply”

after setup.

27

B.

For countries with the following

“Encapsulation”

type after clicking the

“Next”

button, the pop-up

window is shown below:

;

1483 Bridged LLC

;

1483 Routed VC-MUX

In this current window, you will find

THREE

different

Connection Type

:

28

1.

Static (Fixed IP by ISP):

Click the radio button to enable

Static (Fixed IP by ISP)

option, then click

“Next”

, the following window will pop-up:

±

Set IP Address:

Static IP Settings are for users who have a Static IP Address ( WAN side ) from

their ISP.

;

“IP Address”:

This is the static IP Address given by the ISP.

Range for IP Address is x.x.x.y, where 0

x

255 and 1

y

254.

;

“Mask”:

This is the subnet mask given by the ISP.

Range for Subnet Mask is x.x.x.x, where 0

x

255

.

;

“Default Gateway”:

This is the Gateway given by the ISP.

Range for Gateway is x.x.x.y, where 0

x

255 and 1

y

254.

±

“DNS”: This is the DNS address specify by the user or ISP. Check your ISP for setting

detail.

Range for DNS Address is x.x.x.y, where 0

x

255 and 1

y

254.

±

Click

“Apply”

after your setting.

29

2.

DHCP (Get IP dynamically from ISP):

Click the radio button to enable

DHCP (Get IP dynamically from

ISP)

. Click

“Next”

after your choice and the following window will pop-up:

±

Place a check to enable the Default Gateway. The Default Gateway Address is provided by the

ISP.

±

Click

“Apply”

after your setting.