Page 21 / 146
Scroll up to view Page 16 - 20
15
3.1 Windows ME / 98
Step 1
: Click
Start
→
Settings
→
Control Panel
.
Step 2
:
Double-click the
Network
icon.
Step 4
: Go to IP Address icon and select
Obtain an IP address
.
Step 3
: Go to Configuration icon, select network
adapter installed and click
Properties
.
Step 5
: Go to Gateway icon and erase all
previous setting.
Step 6
: Go to DNS Configuration icon, select
Disable DNS
and click
OK
.
1
2
1
2
Page 22 / 146
16
3.2 Windows 2000
Step 1
: Click
Start
→
Settings
→
Control Panel
.
Step 4
:
Select
Internet Protocol (TCP/IP)
and click
Properties
.
Step 2
:
Double-click the
Network and Dial-up
Connections
.
Step 5
:
Select
Obtain an IP address automatically
and
DNS server address automatically.
Then, click
OK
.
Step 3
: Right Click the
Local Area Connection
and
select
Properties
.
1
2
1
2
3
1
2
Page 23 / 146
17
3.3 Windows XP
Step 1
: Click
Start
→
Control Panel
→
Classic View
.
Step 4
:
Go to General icon, select
Internet Protocol
(TCP/IP)
and click
Properties
.
Step 2
: Double-click the
Network Connections
.
Step 5
:
Go to General icon, select
Obtain an IP
address automatically
and
DNS server
address automatically
.
Then, click OK
.
Step 3
: Right Click on the
Local Area Connection
and
select
Properties
.
1
2
1
3
1
2
2
Page 24 / 146
18
3.4 Checking TCP/IP Configuration
After your PC is configured and the system has rebooted, you can check the TCP/IP configuration using the
following utility provided by your Windows system:
A.
Windows 98/ME:
1.
Click on
“Start”
and
“Run”
.
2.
In the open field, enter
“winipcfg”,
and then press
“OK”
.
3.
All the Ethernet adapter information will be shown on the appear Windows. Check if you can get
the following setting:
±
The
IP Address
as
192.168.1.x
±
The
Subnet Mask
as
255.255.255.0
±
The
Default Gateway
as
192.168.1.1
4.
Type
“OK”
to end up the process.
Page 25 / 146
19
B.
Windows 2000:
1.
Click
“Start”
and
“Run”
.
2.
In the open field, enter
“cmd”
then click
“OK”
.
3.
In the command prompt, type
“ipconfig /all”
, then press
“Enter”
.
All the Ethernet adapter information will be shown in the appear Windows. Check if you can
get the following setting:
±
The
IP Address
as
192.168.1.x
±
The
Subnet Mask
as
255.255.255.0
±
The
Default Gateway
as
192.168.1.1
4.
Type
“Exit”
to end up the process.
19216811.live