Page 111 / 146
Scroll up to view Page 106 - 110
105
The following screen will pop-up when clicking the
Update Gateway
button. Click
Browse
button to locate
the configuration file or update image file from your computer's hard drive then click
Update Gateway
. After
the configuration file upgrade process, click
Restart Gateway
to activate your previous setting.
±
Select a File:
Click on the
Browse…
button to locate the configuration file from your computer's
hard drive.
±
Update Gateway:
Click the
Update Gateway
button to upgrade your configuration file.
±
Restart Gateway:
Click
Restart Gateway
after the upgrade process to activate your setting.
Note:
When uploading Firmware/Configuration File to the WL-8064ARM Wireless ADSL2/2+ Router, it
is important not to interrupt the Web browser by closing the window, clicking a link, or loading a new
page. If the browser is interrupted, it may corrupt the upgrading process. When the upload is complete,
your WL-8064ARM Wireless ADSL2/2+ Router will automatically reboot and restart. The upgrade
process will typically take about 1~2 minutes.
Page 112 / 146
106
4.6.5 TOOLS - Ping Test
Ping Test:
The Ping Test page provides an easy way to ping the WL-8064ARM Wireless ADSL2/2+ Router
without invoking the command line interface.
±
Enter IP Address to ping:
Enter the IP Address to ping.
±
Packet size
: Enter the packet size in bytes.
±
Number of echo requests
: Enter the number of echo request.
±
Test
: Click Test to start the ping test. The result will be shown in the window underneath.
Page 113 / 146
107
4.6.6 TOOLS - Modem Test
Modem Test:
The Modem Test page can be used to check whether your Modem is properly connected to the
Network. This test may take a few seconds to complete. To perform the test, select your connection from the
list and press the
Test
button. The value returned will either be
Success
or
Fail
.
Page 114 / 146
108
4.6.7 TOOLS – Save All
Save All:
Click
Save All
in order to permanently save the current configuration of the WL-8064ARM Wireless
ADSL2/2+ Router. If you do restart the system without saving your configuration, the WL-8064ARM Wireless
ADSL2/2+ Router will revert back to the previously saved configuration.
±
Save All:
Click
Save All
to complete and permanently save the setting.
±
Cancel:
Click
Cancel
to ignore all the changes.
Page 115 / 146
109
4.7 STATUS
The Status Menu provides dynamically-updated information about your WL-8064ARM Wireless ADSL2/2+
Router’s Network Status, Connection Status, Modem Status and device performance.
±
Network Statistics:
View the Statistics of different interfaces - Ethernet/USB/ADSL/Wireless.
±
Connection Status:
View the Status of different connections.
±
DHCP Clients:
View the list of DHCP clients.
±
Modem Status:
View the Status and Statistics of your broadband (DSL) connection.
±
Product Information:
View the Product Information and Software Versions.
±
System Log:
View the Log messages.
19216811.live