Page 101 / 146
Scroll up to view Page 96 - 100
95
4.5.4 WIRELESS - Management
Unlike wired network data, your wireless data transmissions can extend beyond your walls and can be
received by anyone with a compatible adapter. The Management configuration page allow you to set the
security features of your WL-8064ARM Wireless ADSL2/2+ Router which are appropriate to your needs.
Click on
WIRELESS
then
Management
, the following screen will pop-up.
Page 102 / 146
96
4.5.4.1 WIRELESS – Management – Access List
Access List:
By default, any wireless computer that is configured with the correct wireless network name or
SSID will be allowed access to your wireless network. For increased security, you can restrict access to the
wireless network to only specific computers based on their MAC addresses.
±
Enable Access List:
Select
Allow
or
Ban
to setup your Access List.
±
MAC Address:
Enter the MAC Address of the wireless network that are Allow or Ban to access
your WL-8064ARM Wireless ADSL2/2+ Router. Then click
Add
to include to your Access List.
±
Apply:
Click
Apply
to complete the setting.
±
Cancel:
Click
Cancel
to ignore all the changes.
±
To complete and save the setting, click
Save All
after clicking the
Apply
button.
Page 103 / 146
97
4.5.4.2 WIRELESS – Management – Associated Stations
Associated Stations:
Click on Associated Stations and the following screen will pop-up. Restricting access
by MAC address adds an obstacle against unwanted access to your network.
±
Ban Station:
Click and select the Ban Station from the list.
±
Apply:
Click
Apply
to complete the setting.
±
Cancel:
Click
Cancel
to ignore all the changes.
±
To complete and save the setting, click
Save All
after clicking the
Apply
button.
Page 104 / 146
98
4.5.4.3 WIRELESS – Management – Multiple SSID
Multiple SSID:
Click on Multiple SSID and the following screen will pop-up. By default, any wireless PC that
is configured with the correct SSID will be allowed access to your wireless network.
An SSID is a 32 character (maximum) alphanumeric key identifying the name of the wireless local area
network. For the wireless devices in a network to communicate with each other, all devices must be
configured with the same SSID.
±
Enable Multiple SSID:
Place a check to Enable Multiple SSID. Enter the SSID that are authorized
to access the WL-8064ARM Wireless ADSL2/2+ Router and click the
Add
button to add your
entry.
±
SSID:
Manually enter the SSID. An SSID is a 32 character (maximum) alphanumeric key
identifying the name of the wireless local area network.
±
Apply:
Click
Apply
to complete the setting.
±
Cancel:
Click
Cancel
to ignore all the changes.
±
To complete and save the setting, click
Save All
after clicking the
Apply
button.
Page 105 / 146
99
4.5.5 WIRELESS – Save All
Save All:
Click
Save All
in order to permanently save the current configuration of the WL-8064ARM Wireless
ADSL2/2+ Router. If you do restart the system without saving your configuration, the WL-8064ARM Wireless
ADSL2/2+ Router will revert back to the previously saved configuration.
±
Save All:
Click
Save All
to complete and permanently save the setting.
±
Cancel:
Click
Cancel
to ignore all the changes.
19216811.live