Page 166 / 181
Scroll up to view Page 161 - 165
iConnect625W ADSL/ADSL2+ Router User Guide
166
11.2
Connection Status
The
Connection Status
screen displays a status summary of the ADSL connection.
To view the
Connection Status
, follow the steps below.
Step 1
:
Click the
Status
tab and the
Connection Status
link. The following page
appears:
The following table describes the
Modem Test Types
and their definitions:
Field
Description
Description
This is the name of the connected ADSL profile.
Type
This is the authentication type of the ADSL connection.
E.g.:
PPPoE, PPPoA, Static.
IP
The WAN IP Address is displayed here when the connection is
established.
State
The ADSL connection status is displayed here.
This is the
connection between your iConnect625W and the DSLAM at your
ISP.
In normal operation, this must be connected.
Online
This is the duration of the Internet connection time for the
connection
Type
specified.
Disconnect
Reason
If the connection is not active, the reason for disconnection is
displayed here.
Page 167 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
167
11.3
DDNS Update Status
DDNS stands for Dynamic Domain Name System. It provides you with a view of your
WAN connection and the DDNS update status of your iConnect625W.
To view the DDNS update status of your iConnect625W router, follow the steps below.
Step 1
:
Click the
Status
tab and the
DDNS Update Status
link. The following page
appears:
Step 2:
As shown on the screen above, the DDNS is disabled by default for your
iConnect625W router. To enable DDNS, refer to the section on
Dynamic DNS
Client
. When the DDNS client is enabled, the DDNS client updates every time
the iConnect625W router gets a new IP address.
Step 3:
Select the
DDNS server
from a list of DDNS service providers. The status and
error description (if any) will be displayed.
Page 168 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
168
The following table describes the
DDNS Status
fields
and their definitions:
Field
Description
Connection
This field defaults to your iConnect625W's WAN connection over
which your router can be accessed.
DDNS Server
This is where you select the server from different DDNS service
providers. Only
DynDNS
and
TZO
are supported.
The status could be one of the following:
Updated
The IP address of the client has been
changed and an update has been sent to the
DDNS server.
No Change
The IP address of the client has not changed.
Status
Error
There is an error with the DDNS update.
Error Description
If the DDNS update status is
Error
, this field gives a description
of the error.
Page 169 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
169
11.4
DHCP Clients
If you have enabled the DHCP server, you can view a list of the DHCP clients on your
LAN from the
DHCP Clients
page.
To view
DHCP Clients
, follow the steps below.
Step 1
:
Click the
Status
tab and the
DHCP Clients
link. The following page appears:
Step 2:
From the
Select LAN
drop-down list, select the LAN group whose DHCP
details you wish to view.
Step 3:
Click the
Refresh
button to update the screen details. The following
information of the DHCP LAN clients is displayed:
±
MAC Address
±
IP Address
±
Host Name
±
Lease Time
Page 170 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
170
11.5
QoS-TCA NTCA Status
To view
QoS-TCA NTCA Status
, follow the steps below.
Step 1
:
Click the
Status
tab and the
QoS-TCA NTCA Status
link. The following page
appears:
19216811.live