Open-Networks iConnect625W Router Manual PDF (Setup & Configuration Guide)

Page 151 / 181 Scroll up to view Page 146 - 150

iConnect625W ADSL/ADSL2+ Router User Guide

151

10.1

System Commands

Systems Commands allows you to save all your new settings, restart the iConnect625W

router, restart the Wireless Access Point and to restore default configurations.

To access

System Commands

, follow the steps below.

Step 1

:

From the

Tools

tab, click the

System Commands

link provided. The following

page appears:

Step 2:

Read the definitions in the table below for the purpose of each of the System

Commands buttons:

Save All, Restart, Restart Access Point

and

Restore

Defaults

.

The following table describes the

Systems Commands

screen fields and their definitions:

Field

Description

Save All

This command allows you to permanently save the current

configuration of your iConnect625W router. If you restart the

system without saving your configuration, the iConnect625W

reverts to the previously saved configuration.

Restart

This command allows you to restart the system.

Restart Access

Point

This command allows you to restart the wireless AP. It is

important to restart the AP anytime you change your wireless

settings.

Restore Defaults

Use this command to restore factory default configuration.

Connectivity to the unit will be lost. You can

reconnect after the unit reboots.

Page 152 / 181

iConnect625W ADSL/ADSL2+ Router User Guide

152

10.2

Remote Log

The Remote Log feature is used in conjunction with the PC tool (software provided with

your iConnect625W router). You can select the Log Level, add an IP address and select

a logging destination on the Remote Log page.

The Remote Log feature allows you to forward all logged information to one or more

remote syslog servers. The type of information forwarded to the remote server depends

on the Log Level selected. Each log message is assigned a severity level, which indicates

how seriously the triggering event affects the iConnect625W functions.

When you configure logging, you must specify a severity level. Log Levels that are rated

at that level or higher are sent to the syslog server and can be viewed using the syslog

server application.

To configure the router settings using

Remote Log

, follow the steps below.

Step 1

:

From the

Tools

tab, click the

Remote Log - Router

link provided. The following

page appears:

Step 2:

Select the

Log Level

from the drop-down options, as shown below. For PPPoE

and PPPoA connections, you can select

Debug

if you want to log the

connection information. This is helpful when trying to debug connection

problems.

Page 153 / 181

iConnect625W ADSL/ADSL2+ Router User Guide

153

When you select a log level, all log information within this severity level and

levels above it (i.e. more severe levels) are sent to the remote station.

Step 3:

Enter the

IP Address

of the remote station, e.g. the syslog server that the log

information is to be sent to.

Step 4:

Click the

Add

button. This station will be added to the drop-down list of the

Select A Logging Destination

field.

Step 5:

Select the

Logging Destination.

You can edit the logging destination listing

using the

Add

or

Delete

buttons.

Step 6:

Click the

Apply

button to apply the settings.

Step 7:

To save your configuration, please refer to the section under

Save / Restart

Menu

.

Page 154 / 181

iConnect625W ADSL/ADSL2+ Router User Guide

154

The following table describes the

Remote Log - Router

screen fields and their definitions:

Field

Description

There are 8 log levels listed in order of severity. The default log

level is

Notice.

When you select a log level, all log information within

this severity level and levels above it (i.e. more severe

levels) are sent to the remote station.

Panic

System panic or other condition that causes the

iConnect625W router to stop functioning.

Alert

Conditions that require immediate correction, such

as a corrupted system database.

Critical

Critical conditions, such as hard drive errors.

Error

Error conditions that generally have less serious

consequences than errors in the emergency, alert

and critical levels.

Warning

Conditions that require monitoring.

Notice

Conditions that are errors but might require special

handling.

Info

Events or non-error conditions of interest.

Log Level

Debug

Software debugging message. Specify the level only

when so directed by a technical support

representative.

Add an IP Address

You should enter the IP address of the remote host to which you

want the log information to be forwarded. You can add more IP

addresses and any IP addresses added will appear in the drop-

down list of the next field,

Select a Logging Destination

.

Select a Logging

Destination

You can select a destination IP address to delete. You can

customize the destination using the

Add

or

Delete

button.

Page 155 / 181

iConnect625W ADSL/ADSL2+ Router User Guide

155

10.3

User Management

The User Management feature allows you to change your login and password details and

to define the idle timeout lapse time.

To access and make changes in the User Management page, follow the steps below.

Step 1

:

From the

Tools

tab, click the

User Management

link provided. The following

page appears:

Step 2:

Your default user name is

root.

Enter a new user name in the

User Name

field,

if required.

Step 3:

Your default password is

ø

P3N

(zero-P-three-N). Enter a new password in the

Password

field, if required.

If you have forgotten your password, you may press and hold the Reset button

located at the back of your router for 10 seconds or more. The iConnect625W

router will reset to its factory default configuration and all custom

configurations will be lost.

Step 4:

Enter your new password again in the

Confirmed Password

field.

Step 5:

The default

Idle Timeout

field is

30

minutes. You will have to log back into the

iConnect625W router after your session has been inactive for 30 minutes. You

can amend the timeout period in the field, if required.

Step 6:

Click the

Apply

button to apply the settings.

Step 7:

To save your configuration, please refer to the section under

Save / Restart

Menu

.

Rate

Popular Open-Networks Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share