Page 161 / 181
Scroll up to view Page 156 - 160
iConnect625W ADSL/ADSL2+ Router User Guide
161
The following table describes the
Modem Test Types
and their definitions:
Field
Description
There are 4 Test Types available.
F5 End
Connectivity to the BRAS server can be verified by
initiating an
F5 Seg
loopback via the DSLAM and to
the authentication server. A DLSAM is a mechanism
at the service provider's central location that links
many customer DSL connections to a single-speed
ATM line.
F5 Seg
Lost and corrupted ATM cells can be quickly ruled
out in the field by initiating a F5 Seg loopback (also
known as ATM ping) to the DSLAM and have the
DSLAM respond by looping back the OAM cells.
By
ruling out problems with the ATM Layer, the service
provider can then focus on examining higher layer
protocols and other configurations to isolate the
problem.
F4 Seg
Segment
- the end of the connection segment.
Test Type
F4 End
End-to-End
- the end of t a VC/VP connection where
the ATM cells are terminated.
Page 162 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
162
11.
Status
The Status tab of the iConnect625W web interface allows you to view the status and
statistics of different connections and interfaces. This page provides access to the
following status pages:
±
Network Statistics;
±
Connection Status;
±
DDNS Update Status;
±
DHCP Clients;
±
QOS-TCA NTCA Status;
±
Modem Status;
±
Production Information;
±
System Log;
±
WDS Report
Each of the features under the
Status Tab
is described in the following sections.
Page 163 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
163
11.1
Network Statistics
The
Network Statistics
page shows you details of transmitted and received packets for
your Ethernet and DSL connections, along with any collisions or errors.
From the Ethernet Network Statistics screen, you can view the network statistics of the
following interfaces by clicking the appropriate radio button at the top of the screen:
±
Ethernet;
±
DSL;
±
Wireless.
To access and view the
Network Statistics
screen and interfaces, follow the steps in the
four sections below.
11.1.1
Ethernet Statistics
Step 1
:
Click the
Status
tab and the
Network Statistics
link. The following page
appears:
Step 2:
The default setting for the
Network Statistics
interface is
Ethernet
.
Step 3:
Click the
Refresh
button to update the screen details of the network statistics.
Page 164 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
164
11.1.2
DSL Statistics
Step 1
:
From the
Network Statistics
page, highlight the
DSL
interface radio button to
view the DSL network statistics.
The following page appears:
Step 2:
Click the
Refresh
button to update the screen details the DSL network
statistics.
Page 165 / 181
iConnect625W ADSL/ADSL2+ Router User Guide
165
11.1.3
Wireless Statistics
Step 1
:
From the
Network Statistics
page, highlight the
Wireless
radio button to view
the Wireless network statistics.
The following page appears:
Step 2:
Click the
Refresh
button to update the screen details for the Wireless network
statistics.
19216811.live