Page 381 / 414
Scroll up to view Page 376 - 380
Default Settings and Technical Specifications
381
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Firewall and security settings
Inbound LAN WAN rules (communications coming in from
the Internet)
All traffic is blocked, except for traffic
in response to requests from the LAN.
Outbound LAN WAN rules (communications from the LAN
to the Internet)
All traffic is allowed.
Inbound and outbound DMZ WAN rules
None
Inbound and outbound LAN DMZ rules
None
Respond to ping on WAN (Internet) ports
Disabled
Stealth mode
Enabled
TCP flood
Enabled
UDP flood
Enabled
Respond to ping on LAN ports
Disabled
IPv4 VPN pass-through for IPSec in NAT mode
Enabled
IPv4 VPN pass-through for PPTP in NAT mode
Enabled
IPv4 VPN pass-through for L2TP in NAT mode
Enabled
IPv6 VPN pass-through for IPSec
Enabled
Multicast pass-through for IGMP
Disabled
Jumbo frames
Disabled
Session limits
Disabled
TCP time-out
1800 seconds
UDP time-out
120 seconds
ICMP time-out
60 seconds
SIP ALG
Disabled
Source MAC filtering
Disabled
IP/MAC bindings
Disabled
Port triggering rules
None
UPnP
Disabled
Bandwidth profiles
None
Content filtering
Disabled
Table 91.
Wireless VPN firewall factory default configuration settings (continued)
Feature
Default Behavior
Page 382 / 414
Default Settings and Technical Specifications
382
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Proxy server blocking
Disabled
Java applets blocking
Disabled
ActiveX controls blocking
Disabled
Cookies blocking
Disabled
Blocked keywords
None
Trusted domains
All
Wireless radio and access point settings
Wireless radio
Enabled
Region
Nonconfigurable: set for the region in
which you purchased the wireless
VPN firewall.
Country
The selection is limited to the
countries in the region in which you
purchased the wireless VPN firewall.
The default settings are:
• Africa. Algeria
• Asia. Azerbaijan
• Europe. Albania
• Middle East. Bahrain
• North America, Latin America, and
The Caribbean. United States
• Oceania. Australia
Operating frequency
Nonconfigurable: Set at 2.4 GHz
Default security profile
default1
Default network name (SSID)
FVS318N_1
Broadcast SSID
Enabled
Security
Open
Encryption
None
Authentication
None
Transmission rate
Best
1
Default transmit power
Full
802.11 wireless mode
802.11ng (for most countries)
80211b/g/n radio frequency channel
Auto
80211n channel spacing
20 MHz
Table 91.
Wireless VPN firewall factory default configuration settings (continued)
Feature
Default Behavior
Page 383 / 414
Default Settings and Technical Specifications
383
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Beacon interval
100 ms
DTIM interval
2
RTS threshold
2346 bytes
Fragmentation threshold
2346 bytes
Preamble mode
Long
Protection mode
None
Power save
Disabled
VPN IPsec Wizard: IKE policy settings for IPv4 and IPv6 gateway-to-gateway tunnels
Exchange mode
Main
ID type
Local WAN IP address
Local WAN ID
Local WAN IP address
Remote WAN ID
Not applicable
Encryption algorithm
3DES
Authentication algorithm
SHA-1
Authentication method
Pre-shared Key
Key group
DH-Group 2 (1024 bit)
Life time
8 hours
VPN IPsec Wizard: VPN policy settings for IPv4 and IPv6 gateway-to-gateway tunnels
Encryption algorithm
3DES
Authentication algorithm
SHA-1
Life time
1 hour
Key group
DH-Group 2 (1024 bit)
NetBIOS
Enabled
VPN IPsec Wizard: IKE policy settings for IPv4 gateway-to-client tunnels
Exchange mode
Aggressive
ID type
FQDN
Local WAN ID
remote.com
Remote WAN ID
local.com
Encryption algorithm
3DES
Table 91.
Wireless VPN firewall factory default configuration settings (continued)
Feature
Default Behavior
Page 384 / 414
Default Settings and Technical Specifications
384
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Authentication algorithm
SHA-1
Authentication method
Pre-shared Key
Key group
DH-Group 2 (1024 bit)
Life time
8 hours
VPN IPsec Wizard: VPN policy settings for IPv4 gateway-to-client tunnels
Encryption algorithm
3DES
Authentication algorithm
SHA-1
Life time
1 hour
Key group
DH-Group 2 (1024 bit)
NetBIOS
Disabled
RADIUS settings
Primary RADIUS server
Disabled and none configured
Secondary RADIUS server
Disabled and none configured
RADIUS time-out period
30 seconds
RADIUS maximum retry count
4
SSL VPN settings
SSL VPN IPv4 client address range
192.168.251.1–192.168.251.254
SSL VPN IPv6 client address range
4000::1–4000::200
User, group, and domain settings
default domain
geardomain
default group
geardomain
default users, default passwords
admin, password
guest, password
Table 91.
Wireless VPN firewall factory default configuration settings (continued)
Feature
Default Behavior
Page 385 / 414
Default Settings and Technical Specifications
385
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Physical and Technical Specifications
The following table shows the physical and technical specifications for the wireless VPN
firewall:
Administrative and monitoring settings
Secure HTTP management
Enabled
Telnet management
Disabled
Traffic meter
Disabled
SNMP
Disabled
Time zone
GMT
Time zone adjusted for daylight saving time
Disabled
Routing logs
Disabled
System Logs
Disabled
Other event logs
Disabled
Email logs
Disabled
Syslogs
Disabled
IPSec VPN logs
Enabled
SSL VPN logs
Enabled
1. The maximum wireless signal rate derived from IEEE Standard 802.11 specifications. The actual throughput varies. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Table 92.
Wireless VPN firewall physical and technical specifications
Feature
Specification
Network protocol and standards compatibility
Data and Routing Protocols
TCP/IP, RIP-1, RIP-2, PPP over Ethernet (PPPoE),
DHCP, DHCPv6
Power plug (localized to the country of sale)
North America
120V, 60 Hz, input
United Kingdom, Australia
240V, 50 Hz, input
Europe
230V, 50 Hz, input
Input, for all regions
12VDC @ 1A output
Table 91.
Wireless VPN firewall factory default configuration settings (continued)
Feature
Default Behavior
19216811.live