Page 41 / 77
Scroll up to view Page 36 - 40
Administration
41
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
Erase sets the user name to admin, the password to password, and the LAN IP address
Set Password
This feature allows you to change the default password that is used to log in to the gateway
with the user name admin.
This gateway password is not the same as the password for wireless access. The label on
your gateway shows your unique wireless network name (SSID) and password for wireless
access (see
Gateway Label
on page
10).
To set the password for the user name admin:
1.
Select
ADVANCED > Administration > Set Password
.
The following screen displays.
2.
Type the old password.
3.
Type the new password in the Set Password field.
4.
Type the new password in the Repeat New Password field.
5.
Click the
Apply
button.
Your change takes effect.
View Event Logs
Event logs capture important gateway events.
To view the event logs:
1.
Select
ADVANCED > Administration > Event Log
.
Page 42 / 77
Administration
42
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
The Event Logs screen displays.
The log screen shows the following information:
•
Time
. The time the event log entry was recorded.
•
Priority
. The severity for this event log entry.
•
Description
. A description of this event log entry.
2.
To refresh the log screen, click the
Refresh
button.
3.
To clear the log entries, click the
Clear Log
button.
Diagnostics
From the Diagnostics screen, you can run ping, traceroute, DS throughput, and US
throughput utilities.
Ping Utility
Ping is an administration utility that tests whether a computer on the network is reachable and
measures the time it takes messages sent from the originating device to reach a destination
computer and return.
To run a ping test:
1.
Select
ADVANCED >
Administration > Diagnostics
.
Page 43 / 77
Administration
43
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
The following screen displays.
2.
In the Utility list, select
Ping
.
3.
Specify the following parameters for the ping utility.
•
Target
. The IP address of the ping target computer.
•
Ping Size
. The size (in bytes) of the ping packet.
•
No. of Pings
. The number of times to ping the target computer.
•
Ping Interval
. The time between pings.
4.
Click the
Start Test
button.
The ping results display.
To stop a ping test:
Click the
Abort Test
button.
To clear the results from the display:
Click the
Clear Results
button.
Traceroute Utility
To display the route and measure transit delays of packets across a network, run the
traceroute utility.
To run a traceroute test:
1.
Select
ADVANCED > Administration > Diagnostics
.
Page 44 / 77
Administration
44
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
The following screen displays.
2.
In the Utility list, select
Traceroute
.
3.
Specify the following parameters for the traceroute utility:
•
Target
. The IP address or host name of the computer you are tracing.
•
Max Hops
. The maximum number of hops to allow when tracing the route.
•
Data Size
. The size (in bytes) of the packet.
•
Base Port
. The port number to send the packet to.
•
Resolve Host
. Select
On
to resolve the host name to the IP address.
4.
Click the
Start Test
button.
The traceroute results display.
To clear the results from the display:
Click the
Clear Results
button.
DS Throughput Utility
To display the speed test for downstream traffic, run the DS throughput utility.
To run a DS throughput test:
1.
Select
ADVANCED >
Administration > Diagnostics
.
Page 45 / 77
Administration
45
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
The following screen displays.
2.
In the Utility list, select
DS throughput
.
3.
Click the
Start Test
button.
The DS throughput results display.
To clear the results from the display:
Click the
Clear Results
button.
US Throughput Utility
To display the speed test for upstream traffic, run the US throughput utility.
To run a US throughput test:
1.
Select
ADVANCED >
Administration > Diagnostics
.
19216811.live