1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. CG3700EMR-1CMNDS
    5. /
  5. 8
Page 36 / 77 Scroll up to view Page 31 - 35
Administration
36
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
Internet Port
The following information about the WAN Internet port displays:
•
MAC Address
. The MAC address of the WAN Internet port.
•
IP Address/Mask
. The IP address of the WAN Internet port.
•
Connection
. The type of WAN Internet port connection.
•
Default Gateway
. The IP address of the default gateway.
•
Domain Name Server
. The IP address of the domain name server.
Wireless Settings (2.4 GHz and 5 GHz)
The following information displays:
•
Name (SSID
). The wireless network name (SSID) that the gateway uses.
•
Region
. The geographic region where the gateway is being used. It is illegal to use the
wireless features of the gateway in some parts of the world.
•
Channel
. The operating channel of the wireless port being used. The default channel is
Auto. When Auto is selected, the gateway finds the best operating channel available.
•
Mode
. The wireless communication mode: Up to 54 Mbps, Up to 145 Mbps (default), or
Up to 300 Mbps.
•
Wireless AP
. Indicates whether the radio feature of the gateway is enabled. If this feature
is not enabled, the Wireless LED on the front panel is off.
•
Broadcast Name
. Indicates whether the gateway is broadcasting its SSID.
•
Wireless Isolation
. Indicates that the wireless clients can connect to the Internet.
However, they cannot access each other or access Ethernet devices on the network.
•
Wi-Fi Protected Setup
. Indicates whether Wi-Fi Protected Setup is configured for this
network.
Page 37 / 77
Administration
37
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
Router Mode
To set the router mode:
1.
Select
ADVANCED > Administration > Router Mode
.
The following screen displays.
2.
Select one of the following radio buttons:
•
Yes
. The CG3700EMR device works as a gateway and provides connected devices
with IP addresses.
•
No
. The CG3700EMR device works as a bridge and devices obtain their IP
addresses from the Internet service provider.
Logs
The log is a detailed record of the websites you have accessed or attempted to access. Up to
256
entries are stored in the log. Log entries display only when keyword blocking is enabled.
No log entries are made for the trusted LAN client.
To view the logs:
1.
Select
ADVANCED >
Administration > Logs
.
Page 38 / 77
Administration
38
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
The following screen displays.
The log screen shows the following information:
•
Description
. The name and source IP of the site or group that visited.
•
Count
. The number of times the website or news group visited.
•
Last Occurance
. The date and time the log entry was recorded.
•
Target
. The name or IP address of the website or news group visited or to which access
was attempted.
•
Source
. The IP address of the initiating device for this log entry.
2.
To control the information included in the log, click any of the following check boxes:
•
Attempted access to allowed sites
.
•
Attempted access to blocked sites and services
.
•
Connections to the Web-based interface of this Gateway
.
•
Gateway operation (startup, get time etc).
•
Known DoS attacks and Port Scans
.
•
Port Forwarding / Port Triggering
.
3.
Do any of the following:
•
To refresh the log screen, click the
Refresh
button.
•
To clear the log entries, click the
Clear Log
button.
•
To email the log immediately, click the
Send Log
button.
•
To save your changes, click the
Apply
button.
Page 39 / 77
Administration
39
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
Network Map
The network map displays information about devices connected to your network.
To view the network map:
Select
ADVANCED > Administration > Network Map
.
The following screen displays.
The following fields display:
•
Device Name
. The name of the connected device.
•
IP Address
. The IP address of the connected device.
•
MAC Address
. The MAC address of the connected device.
•
Interface
. The way the device is connected: Ethernet1, Ethernet2, or WiFi interface.
Back Up Settings
The configuration settings of the wireless cable gateway are stored within the gateway in a
configuration file. You can back up (save) this file to your computer, restore it, or reset it to
the factory default settings.
Page 40 / 77
Administration
40
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
To back up the configuration settings of the gateway:
1.
Select
ADVANCED > Administration >
Backup Settings
.
2.
Click the
Back Up
button.
A copy of the current settings is saved.
Restore Configuration Settings
To restore configuration settings that you backed up:
1.
Select
ADVANCED > Administration >
Backup Settings
.
2.
To find the .cfg file, enter the full path to the file on your network or click the
Browse
button.
3.
Click the
Restore
button.
The gateway reboots.
WARNING:
Do not interrupt the reboot process.
Erase
Under some circumstances (for example, if you move the gateway to a different network or if
you have forgotten the password), you might want to erase the configuration and restore the
factory default settings.
To erase the configuration:
1.
Select
ADVANCED > Administration >
Backup Settings
.
2.
Click the
Erase
button.

Rate

4 / 5 based on 1 vote.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top