1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. CG3700EMR-1CMNDS
    5. /
  5. 10
Page 46 / 77 Scroll up to view Page 41 - 45
Administration
46
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
The following screen displays.
2.
In the Utility list, select
US throughput
.
3.
Click the
Start Test
button.
The US throughput results display.
To clear the results from the display:
Click the
Clear Results
button.
Wireless Channel
You can use the Wireless Channel screen to view wireless networks, or access points, in
your area and to select and join a wireless network.
To manage your wireless access point (AP):
Select
ADVANCED > Administration > Wireless AP
.
Page 47 / 77
Administration
47
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
The following screen displays:
From this screen, you can view wireless access points in use in your area.
To check your wireless channel:
Select Advanced >
Administration > Wireless Channel
.
The following screen displays:
Your network is shown in blue. Yellow shows other networks in your area. Many countries
and geographic locations have laws or guidelines about which channels can be used.
Depending on your location, some channels might not be available.
If many wireless networks at your location use the same channel as your wireless network,
you might experience interference. You can change the channel to avoid the interference.
To change the wireless channel:
1.
Click the
Change Channel
button.
Page 48 / 77
Administration
48
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
The following screen displays.
2.
Select a different channel.
For information about other options available on this screen, see
View or Configure Your
Wireless Network
on page
16.
3.
Click the
Apply
button.
Your change takes effect.
Page 49 / 77
49
6
6.
Advanced Settings
Fine-tuning your network
This chapter describes the advanced features of your gateway. The information requires a solid
understanding of networking concepts. It is for people who want to set up the gateway for unique
situations such as when remote access from the Internet by IP or domain name is needed.
This chapter includes the following sections:
•
Advanced Wireless Settings
•
Port Forwarding and Port Triggering
•
Set Up Port Forwarding to Local Servers
•
Set Up Port Triggering
•
Dynamic DNS
•
Remote Management
•
Universal Plug and Play
Page 50 / 77
Advanced Settings
50
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
Advanced Wireless Settings
You can use this screen to specify WPS settings and to set up a wireless card access list.
View or Change WPS Settings
To view or change WPS settings:
1.
Select
ADVANCED >
ADVANCED Setup > Wireless Features
.
The following screen displays.
Specify the following settings:
•
Disable Gateway’s PIN
. The PIN function might temporarily be disabled when the
gateway detects suspicious attempts to break into the gateway’s wireless settings by
using the gateway’s PIN through WPS. You can manually enable the PIN function by
clearing the
Disable Gateway’s PIN
check box.
•
Keep Existing Wireless Settings
. By default, the Keep Existing Wireless Settings check
box is selected. Best practice is to leave this check box selected.
If you clear this check box, the next time a new wireless client uses WPS to connect to
the gateway, the gateway wireless settings change to an automatically generated random
SSID and security key.
•
WMM
.
WMM (Wireless Multimedia) is a subset of the 802.11e standard. WMM allows
wireless traffic to have a range of priorities, depending on the kind of data.
Time-dependent information, like video or audio, has a higher priority than normal traffic.
For WMM to function properly, wireless clients must support WMM also.
•
WMM Support
. Click this check box to enable WMM support for the 2.4 GHz channel.
•
WMM Support (5 GHz a/n)
. Click this check box to enable WMM support for the 5
GHz channel.

Rate

4 / 5 based on 1 vote.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top