1. Home
    2. /
  2. Manuals
    3. /
  3. NetComm
    4. /
  4. NP805N-11n
    5. /
  5. 8
Page 36 / 62 Scroll up to view Page 31 - 35
NP805N
–
Gigabit Wireless Router
36
NetComm NP805N - Gigabit Wireless Router
YMLO-805N
www.netcomm.com.au
URL Blocking
URL Blocking will block LAN computers from connecting to a pre-defined website. The major difference between the Domain Filter
and URL Blocking is that Domain Filtering require users to input a suffix (e.g. xxx.com, yyy.net) while URL Blocking only requires you
to input a keyword.
To enable URL Blocking, tick the “Enable” tick box at the top of the page.
To set a URL Blocking rule, you need to specify the following:
OPTION
DEFINITION
URL
If any part of the Website’s URL matches the pre
-defined word then the connection will be blocked. For example, you can use
pre-defined word "sex" to block all websites if their URLs contain the pre-defined word "sex".
Enable
Tick to enable the rule.
Click "Save" to save the settings or "Undo" to cancel.
Page 37 / 62
www.netcomm.com.au
37
NetComm NP805N
–
Gigabit Wireless Router
YMLO-805N
MAC Control
MAC Control allows you to assign different access rights for different users and to assign a specific IP address to a specific MAC
address.
To enable MAC Address Control, tick the “Enable” tick box at the top of the page.
Two types of MAC Control are available:
OPTION
DEFINITION
Connection control (C column)
Use this to control which clients (wired and wireless) can connect to the unit. If a client is denied access to connect to this
device, it means the client cannot access the Internet either. Choose to allow or deny clients with MAC addresses that are
not in the list to connect to this device.
Association control (A column)
Check Association Control to control which wireless client can associate with the unit. If a client is denied access to
associate with the unit, it means the client cannot send or receive any data via this device. Choose to allow or deny the
clients with MAC addresses that are not in the list to associate to the wireless LAN.
Please note: Click the "Next Page" or the "Previous Page" buttons to see the entire list
Click "Save" to save the settings or "Undo" to cancel.
Page 38 / 62
NP805N
–
Gigabit Wireless Router
38
NetComm NP805N - Gigabit Wireless Router
YMLO-805N
www.netcomm.com.au
Miscellaneous
This page allows you to change various miscellaneous security settings on the unit.
OPTION
DEFINITION
Administrator Time-out
The period of time with no activity in the web configuration page to logout automatically, set this to zero to disable this
feature.
Remote Administrator Host/Port
Normally only Intranet users can browse the built-in web pages to perform administration tasks. This feature enables
you to perform administration tasks from a remote host. If this feature is enabled, only the specified IP address can
perform remote administration.
Discard PING from WAN side
When this feature is enabled, your router will not respond to ping requests from remote hosts.
DoS Attack Detection
When this feature is enabled, the router will detect and log where the DoS attack comes from on the Internet.
Keep WAN in stealth mode
Prevent the WAN interface from responding to remote probes.
Please note:
If the specified IP address is 0.0.0.0, any host can connect to the router to perform administration tasks.
You
can also use a subnet mask (/nn) to specify a group of trusted IP addresses for example, "10.1.2.0/24".
When Remote Administration is enabled, the web server port will be shifted to 80.
You can also change the web server port.
When enabled, the router can detect the following (and more) DoS attack types:
-
SYN Attack
-
WinNuke
-
Port Scan
-
Ping of Death
-
Land Attack
Click "Save" to save the settings or "Undo" to cancel.
Page 39 / 62
www.netcomm.com.au
39
NetComm NP805N
–
Gigabit Wireless Router
YMLO-805N
Advanced Settings
The Advanced Setting page allows you to configure the advanced settings on the router such as the System log, Dynamic DNS and
SNMP options. Click on any of the menu items on the left to configure the access the respective setting page.
Status
The Status page displays the current System time, and lists any configured Dynamic DNS (DDNS) accounts, any Static or Dynamic
Routes added or any Quality of Service (QoS) rules in place.
Page 40 / 62
NP805N
–
Gigabit Wireless Router
40
NetComm NP805N - Gigabit Wireless Router
YMLO-805N
www.netcomm.com.au
System Log
This enables you to set up the system log features of the router. You can also choose to send the system log to a remote syslog
server (via a UDP connection) or email a copy to a recipient.
OPTION
DEFINITION
IP Address for remote System Logs (syslog)
The IP address of the syslog server where the system log data will be sent. Click the "Enable" checkbox to
enable this function.
Email address to send syslog to
Click the “Enable” checkbox to enable this function.
SMTP Server : port
Enter the IP address or fully qualified domain name (FQDN) and port for the selected email server.
SMTP Username
The SMTP username required to send email
(if required)
.
SMTP Password
The SMTP password required to send email
(if required)
.
Email Addresses
Enter the email addresses to send a copy of the current syslog to.
Email Subject
Enter the email subject to show on any sent emails.
View Log…
View the current system log.
Email Log Now
Email the current syslog to the entered email addresses.

Rate

4.5 / 5 based on 2 votes.

Popular NetComm Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top