Page 16 / 62
Scroll up to view Page 11 - 15
NP805N
–
Gigabit Wireless Router
16
NetComm NP805N - Gigabit Wireless Router
YMLO-805N
www.netcomm.com.au
3.
If you want to change the Wireless network settings, you can do so on this page. You can enable or disable the Wireless
network, select whether to broadcast your SSID or not and change the Wireless network name. Change the settings as
needed and click “Next”.
(If you wish to use the default settings, click “Next”)
4.
If you want to change the Wireless network security settings, you can do so on this page. You can change the type of
Wireless network security in use or the Wireless Security key.
Change the settings as needed and click “Next”.
(If you wish to use the default settin
gs, click “Next”)
Page 17 / 62
www.netcomm.com.au
17
NetComm NP805N
–
Gigabit Wireless Router
YMLO-805N
5.
If you want to change the system username or password, enter the new username to use or the current system password
into the "Old Password" field and then enter the new password into both the "Desired Password" and "Retype Password"
fields and then click “Next”.
(If you do not wish to change the password, leave the fields blank and click “Next”)
6.
Confirm the setup information and click “
Finish
” if everything is correct. You can also click “Back” to go back and change
any of the previously configured settings.
7.
The router will then apply your configured settings and restart.
8.
Once completed, your router is configured and should be connected to the Internet.
Page 18 / 62
NP805N
–
Gigabit Wireless Router
18
NetComm NP805N - Gigabit Wireless Router
YMLO-805N
www.netcomm.com.au
Advanced Configuration
To access the advanced configuration options of your NP805N, you need to login to the web configuration and change to
Advanced view.
To do this, open your web browser (e.g. Internet Explorer/Firefox/Safari), type
into the address bar at the top
of the window and press the enter key.
At the login screen, type "admin" (without quotes) in the Username and Password field. Then click on Login.
Please note: admin is the default username and password for the unit.
Click on any of the top menu items to access the respective function configuration pages.
Page 19 / 62
www.netcomm.com.au
19
NetComm NP805N
–
Gigabit Wireless Router
YMLO-805N
Status
ITEM
DESCRIPTION
IP Address
The current WAN IP address of the router
Subnet Mask
The current subnet mask in use by the router
Gateway
The gateway in use by the router to access the internet
Domain Name Server
The Domain name server converts
Connection Time
The time the current connection to the internet has been active
WAN Link-Local Address
The current WAN IPv6 address
Global IPv6 Address
The current IPv6 subnet mask in use
LAN IPv6 Link-Local Address
The current LAN IPv6 address of the NP805N
Link Status
The current IPv6 WAN connection status
Wireless mode
The current status of the wireless network (enabled or disabled)
SSID
The current wireless network name is use by the router
Channel
The current wireless channel in use on your wireless network
Security
The currently selected wireless security in use on your wireless network
Octets
The number of data packets which have passed into and out of the router
Unicast Packets
The number of unicast packets which have passed into and out of the router
Multicast packets
The number of multicast packets which have passed into and out of the router.
Page 20 / 62
NP805N
–
Gigabit Wireless Router
20
NetComm NP805N - Gigabit Wireless Router
YMLO-805N
www.netcomm.com.au
Network Setup
Network Setup
This page allows you to change the LAN (Local Area Network) and WAN (Wide Area Network) connection settings as well as the
automatic failover function on the NP805N.
OPTION
DEFINITION
LAN IP Address
The local IP address of the NP805N.
(The computers on your network must use this IP address as their Default Gateway. You can change it if necessary.)
Subnet Mask
Enter the subnet mask for use on the local network. This would usually be set to 255.255.255.0.
WAN Interface Types
Ethernet WAN (xDSL/Cable/Satellite)
WAN Type:
You can select from the following WAN types:-
Dynamic IP
Static IP
PPP over Ethernet
PPTP
L2TP
Dynamic IP
OPTION
DEFINITION
Host Name
Set the hostname for your connection
(Optional - Refer to your ISP for more information)
.
ISP Registered MAC Address
You can change the WAN port MAC address if needed to clone your 3G modem
(Optional - Refer to your ISP for more information)
.
NAT
This option enables or disables "Network Address Translation" for this connection type.
Multicast
Enable multicast support for this connection. Select the appropriate IGMP protocol version from the pull down menu.
IGMP Snooping
This option enables or disables "IGMP" for this connection type.
19216811.live