www.netcomm.com.au

41

NetComm NP805N

–

Gigabit Wireless Router

YMLO-805N

Dynamic DNS

The Dynamic DNS feature enables users to set a static domain name for their internet connection even when

the ISP only provides a dynamic IP address.

By mapping the host name to the current public IP address of the router, users who want to connect to the router or any services

behind the router from the internet can just use the Dynamic DNS hostname instead of the IP Address which might change every

time the router connects to the Internet.

Before you can use Dynamic DNS service, you need to register an account on one of the many supported Dynamic DNS providers

such as DynDNS.org, TZO.com or dhs.org.

After registering the account, the Dynamic DNS provider will provide you with the following details:



Host Name



Username/Email



Password/Key

To

enable the Dynamic DNS feature on the unit, click the “Enable” check box, choose the appropriate Dynamic DNS Provider and

enter the details supplied by your Dynamic DNS provider.

Click "Save" to save the settings or "Undo" to cancel.

NP805N

–

Gigabit Wireless Router

42

NetComm NP805N - Gigabit Wireless Router

YMLO-805N

www.netcomm.com.au

QoS

Quality of Service (QoS) provides different priority to different users or data flows. It can also guarantee a certain level of

performance.

OPTION

DEFINITION

Cross-layer QoS

Select to enable or disable cross-layer Quality of Service support on the connection.

Flexible Bandwidth Management

Select to enable or disable flexible bandwidth management control on the connection.

Average Bandwidth

Select to enable or disable bandwidth averaging on the connection.

You can also control the whether certain types of network traffic are given priority or even forbidden on your network. Put a tick in

the checkbox to either grant the specified traffic type priority over others or to forbid the traffic altogether.

Click the “Advanced Setting” button to display the QoS rules table and configure advanced QoS settings. Click the “Add New Rule”

to configure a new QoS rule or “Group Setting” to create a group of traffic to apply the entered QoS rules to.

To create a group, click the “Group Setting” button, and then click “New Add” and select to group via IP address or MAC address.

OPTION

DEFINITION

Rule

Select to enable or disable the QoS rule.

Class

Select the class of traffic you would like to prioritise.

Class Info

Enter the applicable class information to apply QoS to.

Function

Select the appropriate function from the class to apply QoS to.

Function data

Enter the appropriate data required to match your selected function.

Direction

Select the applicable traffic direction to prioritise.

Schedule

Select the previously configured schedule rule to determine when to apply the traffic management. The QoS rules can

work in conjunction with Scheduling Rules.

Please note: For further instructions on scheduling

rules, please refer to the “Scheduling” section later in this guide

Click on "Save" to store your setting or "Undo" to discard your changes.

www.netcomm.com.au

43

NetComm NP805N

–

Gigabit Wireless Router

YMLO-805N

SNMP

SNMP (Simple Network Management Protocol) is a protocol designed to give a user the capability to remotely manage a computer

network by polling and setting terminal values and monitoring network events.

OPTION

DEFINITION

Enable SNMP

You must check Local, Remote or both to enable SNMP function. If Local is checked, this device will only respond to requests

from LAN connected hosts. If Remote is checked, this device will respond to requests from the WAN connection.

Get Community

Sets the community string your device will respond to for Read-Only access.

Set Community

Sets the community string your device will respond to for Read/Write access.

IP 1, IP 2, IP 3, IP 4

Input your SNMP Management host IP here. You will need to configure the address where the device should send SNMP Trap

messages to.

SNMP Version

Please select proper SNMP Version that your SNMP Management software supports.

WAN Access IP Address

You can limit remote access to a specific IP address by entering it here.

Please note: If "Remote" access is enabled, the default setting of 0.0.0.0 means any IP obtain SNMP protocol Information.

Click on "Save" to store your setting or "Undo" to discard your changes.

NP805N

–

Gigabit Wireless Router

44

NetComm NP805N - Gigabit Wireless Router

YMLO-805N

www.netcomm.com.au

Routing

Routing tables allow you to determine which physical interface address to use for outgoing IP data. If you have more than one

router and subnet, you will need to configure the routing table to allow packets to find the proper routing path and allow different

subnets to communicate with each other.

These settings are used to setup the static and dynamic routing features of the NP805N.

Dynamic Routing:

Routing Information Protocol (RIP) will exchange information about different host destinations for working out routes throughout the

network.

Please note: Only select RIPv2 if you have a different subnet in your network. Otherwise, please select RIPv1.

Static Routing:

For static routing, you can specify up to 8 routing rules.

You need to enter the destination IP address, subnet mask, gateway, and hop for each routing rule, then enable the rule by clicking

the Enable checkbox.

Click on "Save" to store your setting or "Undo" to discard your changes.

www.netcomm.com.au

45

NetComm NP805N

–

Gigabit Wireless Router

YMLO-805N

System Time

This page allows you to change the System time setting on the NP805N.

OPTION

DEFINITION

Time Zone

Select the time zone where this device is located.

Auto-Synchronization

Select the "Enable" checkbox to enable this function.

Time Server

Select a NTP time server to obtain the current UTC time from.

Sync with Time Server

Select if you want to set Date and Time by NTP Protocol.

Sync with my PC

Select if you want to set Date and Time using your computers Date and Time

Click "Save" to save the settings or "Undo" to cancel.