1. Home
    2. /
  2. Manuals
    3. /
  3. NetComm
    4. /
  4. 3G10WVT
    5. /
  5. 22
Page 106 / 116 Scroll up to view Page 101 - 105
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
106
Default value:0
--pskey <”pskeyStr”>
Description:Set the WPA Pre-Shared Key
Valid value:string of 8 ~ 63 characters.
Note:1.wlPreauth can only be used with WPA2.
2.When using WPA-PSK or WPA2-PSK,WPA Pre-Shared Key (pskey) must be set first.
3.WEP MUST be enable when security is set to shared / 802.1X radius security mode.
4.WEP MUST be disable when security is set to WPA/WPA-PSK security mode
5.When setting keyidx to N for WEP key,ensure that the nkeyN field has a string value.
6.Always issue a complete security command.For example,once WEP is enabled,it will still be
enabled even after changing the security mode,until the command“--wep disabled”is received
by the gateway.
EXAMPLE 2:
After setting up the wireless configuration in example 1,the user wants to configure the wireless
LAN security.
Scenario 1:
WPA2 with Radius server IP address of 172.16.2.199
wlan security wpa2 --rasip 172.16.2.199 --wlPreauth 1
Scenario 2:
WPA-PSK with“123456789”as the passkey.
wlan security psk --pskey“123456789”--wpaenc aes --wep disabled
Scenario 3:
802.1X with Radius server IP of 172.16.2.199 and RADIUS key as“whatever”
wlan security radius --rasip 172.16.2.199 --raskey“whatever”--wep enabled
Page 107 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
107
CONFIGURE WIRELESS LAN MAC FILTER
Description:Enable,disable and configure the wireless LAN MAC filter feature.This feature
enables the gateway to allow or deny connection from wireless client based on the MAC address.
Synopsis:
wlan macfilter [--mode <disabled|allow|deny>]
[--add <MACaddress>]
[--remove <MACaddress>]
Options:
--mode <disabled|allow|deny>
Description:Disable and set the wireless LAN MAC filter mode.
Valid Value:
Disabled:disable wireless LAN MAC filter
Allow:only allow access to wireless client with the MAC address listed in the gateway
Deny:allow all wireless client to connect unless the MAC address is listed in the gateway
Default Value:disabled
--add <MACaddress>
Description:add one MAC Address entry
--remove <MACaddress>
Description:remove one MAC Address entry
Note:The setting of the MAC filter takes effect immediately.When setting up this feature through
the wireless interface,be careful of blocking the computer.
Changing the mode will make the MAC address list be reserved.
To see the list of MAC addresses,use the command“wlan info –macfilter”.
Page 108 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
108
EXAMPLE 3:
After Example 2,the user want to allow only wireless client with MAC address of 00:11:22:33:44:55
to be able to connect to the gateway
wlan macfilter --mode allow --add 00:11:22:33:44:55
Following the command above,if the user wants to deny wireless client with MAC address of
00:11:22:33:44:55 to be able to connect to the AP.
wlan macfilter --mode deny
Configure Wireless Bridge (Wireless Distribution System/WDS)
Description:configure the wireless bridge
Synopsis:
wlan wds [--mode <ap|wds>] [--restrict <enabled|disabled>]
[--rmac1 <MACaddress>] [--rmac2 <MACaddress>]
[--rmac3 <MACaddress>] [--rmac4 <MACaddress>]
Options:
--mode <ap|wds>
Description:configure wireless AP mode.
Default value:ap
--restrict <enabled|disabled>
Description:enable or disable bridge restrict mode.
Default value:disabled
--rmac1 <MACaddress>
--rmac2 <MACaddress>
--rmac3 <MACaddress>
--rmac4 <MACaddress>
Description:set remote bridge MAC address
Note:The“--restrict”option have to be enable before setting any restrict MAC address (--
rmac1~4) or the restrict MAC address setting will be ignored.
The behavior of WDS is similar to connecting two or more AP using a hub.However,please be
aware of the IP assignment to prevent assigning two or more hosts / STAs to the same IP address.
To avoid IP address conflict,only enable DHCP server in one gateway and disable the other
gateway DHCP server.
WDS CLI (command line interface) does NOT support Enable (Scan) mode in Bridge Restrict while
using WUI (Web UI) does.When Bridge Restrict set to Enable (Scan) mode in WUI,the CLI will show
Bridge Restrict disabled.
Page 109 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
109
EXAMPLE 4:
After example 3, the user want to connect another AP which has DHCP disabled and the MAC
address is 00:12:34:56:78:9a
wlan wds --mode wds --restrict enabled --rmac1 00:12:34:56:78:9a
Show wireless LAN interface configurations
Description:show the current configuration of the wireless LAN interface
Synopsis:
wlan info [--config] [--security]
[--macfilter] [--wds] [--station]
Options:
--config
Description:display the list of parameters from config option
Example:
> wlan info --config
Wlan Config Info :
Basic :
wlan config enable = 1
wlan config hide = 0
wlan config ssid = Series7Wireless7890
wlan config bssid = 00:11:22:33:44:56
wlan config country = AU
Advance :
wlan config isolate = 0
wlan config band = b
wlan config channel = 0
wlan config rate = 0
wlan config mrate = 0
wlan config brate = default
wlan config rts = 2347
wlan config frag = 2346
wlan config dtim = 1
wlan config beacon = 100
wlan config xpress = off
Page 110 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
110
wlan config gmode = auto
wlan config gprotect = auto
wlan config preamble = long
3G10WVT - HSPA 7.2Mbps Wi-Fi Gateway with Voice USER GUIDE
--security
Description:display the list of parameters from security option
Example:
> wlan info --security
Wlan Security Info :
wlan security auth mode = psk
wlan security wpa = aes
wlan security wpaGTKRekey = 0
wlan security wpaPresharedKey = 1234567890
wlan security Wepstate = disabled
wlan security WepKeyBit = 128
wlan security WepKey2 =
wlan security WepKey3 =
wlan security WepCurrentKeyindex = 1
--macfilter
Description:display the list of parameters from macfilter option
Example:
> wlan info --macfilter
Wlan macfilter Info :
wlan macfilter mode = disabled
wlan macfilter entry :
--wds
Description:display the list of parameters from wds opiton
Example:
> wlan info --wds
Wlan wds Info :
wlan wds mode = ap
wlan wds restrict mode = disabled

Rate

4.7 / 5 based on 3 votes.

Popular NetComm Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top