Page 86 / 116
Scroll up to view Page 81 - 85
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
86
FOR WINDOWS VISTA
2.
Go to the control panel,and select Printers.Once in the Printers page,click the Add a printer
button as shown below.
3.
Select Add a network,wireless or bluetooth printer.
4.
Click on the radio-button labelled Select a shared printer by name,and type
NOTE:
The PrinterName must be the same as the printer name entered in the Web User Interface above.
Page 87 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
87
5.
Next,select the driver that came with your printer.Browse through the list to select your
printer driver,or click‘Have Disk’if you have your printer driver installation media.
6. Choose whether you want this printer to be the default printer,and then click Next.
Page 88 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
88
7. Click Finish.Your device is now configured and ready for use.
Page 89 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
89
These steps explain the procedure for enabling the USB Storage.
1:
Enable Samba Server from Web User Interface.
Select Enable Samba checkbox and enter Netbios name and Directory Name
Field
Description
Netbios Name
It is the hostname of the PC
The default name is“ntc-cpe”
Directory Name
The folder name of“root”directory.
The default name is“ntc-cpe”
FOR WINDOWS XP:
2:
Open a web-browser (such as Internet Explorer,Firefox or Safari) and type in the address.
\\”NetbiosName”\”DirectoryName”\(eg.\\ntc-cpe\ntc-cpe)
Note:
There is no username and password required to access the USB drive, the user will be able to read/write the folder/files
in the USB drive.
APPENDIX B: USB STORAGE
Page 90 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
90
FOR MAC OSX:
2.
From the Finder,select the Go and then click Connect to Server
3.
In the address field of the Connect to Server dialog,type in the address:
smb://“NetbiosName”/“DirectoryName” (eg smb://ntc-cpe/ntc-cpe)
4.
Click the + button to add this server to the list of Favourites and then click Connect
5.
Select the Guest radio button and then click Connect