Page 56 / 94
Scroll up to view Page 51 - 55
51
2.
Click the
Details
item:
3.
Choose the
“
PRTmate: (All-in-1)
”
from the list attached at the
Print To
item. Be sure that the
Printer Driver
item is configured to the correct driver of your server printer.
4.
Click on the button of
Port Settings
:
Type in the IP address of this product and then click the
OK
button.
6.
Make sure that all settings mentioned above are correct and then click the
OK
button.
Downloaded from
www.Manualslib.com
manuals search engine
Page 57 / 94
52
5.2 Configuring on Windows NT Platforms
The configuration procedure for a Windows NT platform is similar to that of Windows 95/98 except the screen of
printer
Properties
:
Compared to the procedure in last section, the selection of
Details
is equivalent to the selection of
Ports
, and
Port
Settings
is equivalent to
Configure Port
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 58 / 94
53
5.3 Configuring on Windows 2000 and XP Platforms
Windows 2000 and XP have built-in LPR client, users could utilize this feature to Print.
You have to install your Printer Driver on LPT1 or other ports before you preceed the following sequence.
1.Open Printers and Faxs
.
2.Select
“
Ports
”
page, Click
“
Add Port
…”
Downloaded from
www.Manualslib.com
manuals search engine
Page 59 / 94
54
3. Select
“
Standard TCP/IP Port
”
, and then click
“
New Port
…”
4.Click Next and then provide the following information:
Type address of server providing LPD that is our NAT device:192.168.1.254
Downloaded from
www.Manualslib.com
manuals search engine
Page 60 / 94
55
1.
Select Custom, then click
“
Settings
…”
6.Select
“
LPR
”
, type
”
lp
“
lowercase letter in
“
Queue Name:
”
And enable
“
LPR Byte Counting Enabled
”
.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live