41

4.5 Administration

4.5.1 Change Password

You can change Password here. We

strongly

recommend you to change the system password for security reason.

Downloaded from

www.Manualslib.com

manuals search engine

42

4.5.2 Firmware Upgrade

You can upgrade firmware by clicking

Firmware Upgrade

button.

4.5.3 Backup Setting

You can backup your settings by clicking the

Backup Setting

button and save it as a bin file. Once you want to

restore these settings, please click

Firmware Upgrade

button and use the bin file you saved.

Downloaded from

www.Manualslib.com

manuals search engine

43

4.5.4 Reset to factory default

You can also reset this product to factory default by clicking the

Reset to default

button.

4.5.5 Reboot

You can also reboot this product by clicking the

Reboot

button.

4.5.6 System Time

Downloaded from

www.Manualslib.com

manuals search engine

44

Get Date and Time by NTP Protocol

Selected if you want to Get Date and Time by NTP Protocol.

Time Server

Select a NTP time server to consult UTC time

Time Zone

Select a time zone where this device locates.

Set Date and Time manually

Selected if you want to Set Date and Time manually.

Set Date and Time manually

Selected if you want to Set Date and Time manually.

Function of Buttons

Sync Now:

Synchronize system time with network time server

Daylight Saving:

Set up where the location is.

4.5.7 Remote Access

Remote Administrator Host/Port

In general, only Intranet user can browse the built-in web pages to perform administration task. This feature enables

you to perform administration task from remote host. If this feature is enabled, only the specified IP address can

Downloaded from

www.Manualslib.com

manuals search engine

45

perform remote administration. If the specified IP address is 0.0.0.0, any host can connect to this product to perform

administration task. You can use subnet mask bits "/nn" notation to specified a group of trusted IP addresses. For

example, "10.1.2.0/24".

NOTE: When Remote Administration is enabled, the web server port will be shifted to 88. You can change web

server port to other port, too.

Administrator Time-out

The time of no activity to logout automatically. Set it to zero to disable this feature.

4.5.8 Network wake-up

MAC Address for Wake-on-LAN

Wake-on-LAN is a technology that enables you to power up a networked device remotely. In order to enjoy this

feature, the target device must be Wake-on-LAN enabled and you have to know the MAC address of this device, say

00-11-22-33-44-55. Clicking "Wake up" button will make the router to send the wake-up frame to the target device

immediately.

Downloaded from

www.Manualslib.com

manuals search engine