1. Home
  2. /
  3. Manuals
  4. /
  5. MSI
  6. /
  7. RG54GS
  8. /
  9. 8
Page 36 / 94 Scroll up to view Page 31 - 35
31
4.4.5 URL Filtering
URL Blocking
will block LAN computers to connect to pre-defined Websites.
The major difference between
Domain filter
and
URL Blocking
is Domain filter require user to input suffix
(like .com or .org, etc), while URL Blocking require user to input a keyword only. In other words, Domain filter can
block specific website, while URL Blocking can block hundreds of websites by simply a
keyword
.
URL Blocking Enable
Checked if you want to enable URL Blocking.
URL
If any part of the Website's URL matches the pre-defined word, the connection will be blocked.
For example, you can use pre-defined word "sex" to block all websites if their URLs contain pre-defined word "sex".
Enable
Checked to enable each rule.
Downloaded from
www.Manualslib.com
manuals search engine
Page 37 / 94
32
In this example:
1. URL include
msn
will be blocked, and the action will be record in log-file.
2. URL include
sina
will be blocked, but the action will be record in log-file
3. URL include
cnnsi
will not be blocked, but the action will be record in log-file.
4. URL include
espn
will be blocked, but the action will be record in log-file
Downloaded from
www.Manualslib.com
manuals search engine
Page 38 / 94
33
4.4.6 Routing Table
Routing Tables
allow you to determine which physical interface address to use for outgoing IP data grams. If you
have more than one routers and subnets, you will need to enable routing table to allow packets to find proper routing
path and allow different subnets to communicate with each other.
Routing Table settings are settings used to setup the functions of static.
Static Routing
: For static routing, you can specify up to 8 routing rules. You can enter the destination IP address,
subnet mask, gateway, hop for each routing rule, and then enable or disable the rule by checking or unchecking the
Enable checkbox.
Downloaded from
www.Manualslib.com
manuals search engine
Page 39 / 94
34
Example:
Configuration on NAT Router
Destination
SubnetMask
Gateway
Hop
Enabled
192.168.1.0
255.255.255.0
192.168.1.216
1
ˇ
192.168.0.0
255.255.255.0
192.168.1.103
1
ˇ
So if, for example, the client3 wanted to send an IP data gram to 192.168.0.2, it would use the above table to
determine that it had to go via 192.168.1.103 (a gateway),
And if it sends Packets to 192.168.1.11 will go via 192.168.1.216
Each rule can be enabled or disabled individually.
After
routing table
setting is configured, click the
save
button.
Downloaded from
www.Manualslib.com
manuals search engine
Page 40 / 94
35
4.4.7 Schedule Rule
You can set the schedule time to decide which service will be turned on or off. Select the
enable
item.
Press
Add New Rule
You can write a rule name and set which day and what time to schedule from
Start Time
to
End Time
. The
following example configure
ftp time
as everyday 14:10 to 16:20
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular MSI Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top