Page 176 / 351
Scroll up to view Page 171 - 175
176
reset heartbeat
Restarts the heartbeat sequence.
reset ipmap
Clears the IPMap table (NAT).
reset log
Rewinds the diagnostic log display to the top of the existing Motorola Netopia® Gateway
diagnostic log. The
reset
log command does not clear the diagnostic log. The next
show
log
command will display information from the beginning of the log file.
reset security-log
Clears the security monitoring log to make room to capture new entries.
reset wan-users [all |
ip-address
]
This function disconnects the specified WAN User to allow for other users to access the
WAN. This function is only available if the number of WAN Users is restricted and NAT is on.
Use the
all
parameter to disconnect all users. If you logon as Admin you can disconnect
any or all users. If you logon as User, you can only disconnect yourself.
reset wan
This function resets WAN interface statistics.
reset wepkeys
This function allows you to force your wireless WEP key settings back to the default values,
if there are default values. For example, on some models, the WEP keys are based on the
serial number. This allows you to get back those default settings if you have changed them
without the need to reset the entire configuration of the unit.
Page 177 / 351
177
SHELL Commands
restart [
seconds
]
Restarts your Motorola Netopia® Gateway. If you include the optional
seconds
argument,
your Motorola Netopia® Gateway will restart when the specified number of seconds have
elapsed. You must enter the complete
restart
command to initiate a restart.
show all-info
Displays all settings currently configured in the Motorola Netopia® Gateway.
show backup
Displays the status of the Backup port, Up or Down, and reports the current port in use.
show bridge interfaces
Displays bridge interfaces maintained by the Motorola Netopia® Gateway.
show bridge table
Displays the bridging table maintained by the Motorola Netopia® Gateway.
show config
Dumps the Motorola Netopia® Gateway’s configuration script just as the
script
com-
mand does in config mode.
show crash
Displays the most recent crash information, if any, for your Motorola Netopia® Gateway.
show dhcp agent
Displays DHCP relay-agent leases.
show dhcp server leases
Displays the DHCP leases stored in RAM by your Motorola Netopia® Gateway.
Page 178 / 351
178
show diffserv
Displays the Differentiated Services and QoS values configured in the Motorola Netopia®
Gateway.
show dslf device-association
Displays LAN devices that conform with the TR111 Gateway requirement. It displays - IP
Address, Manufacture OUI and Serial number.
show enet [ all ]
Displays Ethernet interface statistics maintained by the Motorola Netopia® Gateway.
Beginning with Firmware Version 7.7, supports display of individual LAN switch port statis-
tics as well as WAN Ethernet statistics (where applicable).
Example:
show enet status all
10/100 Ethernet 1
Port Status:
Link down
Transmit OK
: 0
Transmit unicastpkts
: 0
Receive
OK
: 0
Receive unicastpkts
: 0
Tx Octets
: 0
Rx Octets
: 0
10/100 Ethernet 2
Port Status:
Link down
Transmit OK
: 0
Transmit unicastpkts
: 0
Receive
OK
: 0
Receive unicastpkts
: 0
Tx Octets
: 0
Rx Octets
: 0
10/100 Ethernet 3
Page 179 / 351
179
SHELL Commands
Port Status:
Link up
Duplex:
Full-duplex not active
Speed:
100BASE-X
Transmit OK
: 3309
Transmit unicastpkts
: 31
Receive
OK
: 5588
Receive unicastpkts
: 1976
Tx Octets
: 31
Rx Octets
: 1976
10/100 Ethernet 4
Port Status:
Link down
Transmit OK
: 0
Transmit unicastpkts
: 0
Receive
OK
: 0
Receive unicastpkts
: 0
Tx Octets
: 0
Rx Octets
: 0
show etheroam ah
Displays OAM internal information, such as OAM mode, state, configurations, events and
OAM statistics.
show features
Displays standard and keyed features installed in the Motorola Netopia® Gateway.
show group-mgmt
Displays the IGMP Snooping Table.
show ip arp
Displays the Ethernet address resolution table stored in your Motorola Netopia® Gateway.
Page 180 / 351
180
show ip igmp
Displays the contents of the IGMP Group Address table and the IGMP Report table main-
tained by your Motorola Netopia® Gateway.
show ip interfaces
Displays the IP interfaces for your Motorola Netopia® Gateway.
show ip ipsec
Displays IPSec Tunnel statistics.
show ip firewall
Displays firewall statistics.
show ip lan-discovery
Displays the LAN Host Discovery Table of hosts on the wired or wireless LAN, and whether
or not they are currently online.
show ip routes
Displays the IP routes stored in your Motorola Netopia® Gateway.
show ip state-insp
Displays whether stateful inspection is enabled on an interface or not, exposed addresses
and blocked packet statistics because of stateful inspection.
show ipmap
Displays IPMap table (NAT).
19216811.live