User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
82
ACS.
Periodic Inform Enable
When this field is enabled, the DSL device will send an Inform RPC
to the ACS server at the system startup, and will continue to send
it periodically at an interval defined in
Periodic Inform Interval
field; When this field is disabled, the DSL device will only send
Inform RPC to the ACS server once at the system startup.
Periodic Inform Interval
Time interval in second to send Inform RPC.
Connection Request Field Description
User Name
The username the remote ACS should use when connecting to this
device.
Password
The password the remote ACS should use when connecting to this
device.
Path
The path of the device Connection Request URL. The device
Connection Request URL should be configured based on the
Device_IP, Path and Port as follows:
http://Device_IP:Port/Path
Port
The port of the device Connection Request URL.
ACS Certificate CPE
Specify whether to check the ACS certification of the router.
Show Message
Select Enable to display ACS SOAP messages on the serial console.
CPE sends GetRPC
Select Enbale, the CPE contact the ACS to obtain configuration
updates.
Skip MReboot
Specify whether to send an MReboot event code in the inform
message.
Delay
Specify whether to start the TR-069 program after a short delay.
Auto Execution
Specify whether to automatically start the TR-069 after the router
is powered on.
CT Inform Extention
Specify whether to support China Telecom extension inform type.
Function buttons in this page:
Apply Changes
Set new configuration. New parameters will take effect after save into flash memory and
reboot the system. See section “Admin” for save details.
Undo
Discard your changes
19216811.live