1. Home
    2. /
  2. Manuals
    3. /
  3. LogN
    4. /
  4. HN-DR4PG
    5. /
  5. 13
Page 61 / 85 Scroll up to view Page 56 - 60
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
61
Undo
Discard your changes
Show MACs
List MAC address in forwarding table.
When
Show MACs
is clicked
Fields in this page:
Field
Description
Port No
The Port No which the bridge forwarding to attached.
MAC Address
The MAC address of the device.
Is Local?
To indicate Static or Dynamic.
Aging Timer
To indicate Aging Timer configured.
Function buttons in this page:
Refresh
Click to display updated data since you opened this page.
Close
Click to close the window and go back to the main menu.
4.7.3
Routing
The Routing page enables you to define specific route for your Internet and network data.
Most users do not need to define routes. On a typical small home or office LAN, the existing
Page 62 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
62
routes that set up the default gateways for your LAN hosts and for the DSL device provide
the most appropriate path for all your Internet traffic.
On your LAN hosts, a default gateway directs all Internet traffic to the LAN port(s) on the
DSL device. Your LAN hosts know their default gateway either because you assigned it to
them when you modified your TCP/IP properties, or because you configured them to receive
the information dynamically from a server whenever they access the Internet.
On the DSL device itself, a default gateway is defined to direct all outbound Internet traffic to
a route at your ISP. The default gateway is assigned either automatically by your ISP
whenever the device negotiates an Internet access, or manually by user to setup through the
configuration.
You may need to define routes if your home setup includes two or more networks or
subnets, if you connect to two or more ISP services, or if you connect to a remote corporate
LAN.
Fields in first section of the page:
Field
Description
Default Gateway
Select your default gateway
Function buttons for first section:
Apply Changes
Set new configuration. New parameters will take effect after save into flash memory and
Page 63 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
63
reboot the system. See section “Admin” for save details.
Fields in the second section of the page:
Field
Description
Enable
Check to enable the selected route or route to be added.
Destination
The network IP address of the subnet. The destination can be specified
as the IP address of a subnet or a specific host in the subnet. It can also
be specified as all zeros to indicate that this route should be used for all
destinations for which no other route is defined (this is the route that
creates the default gateway).
Subnet Mask
The network mask of the destination subnet. The default gateway uses a
mask of 0.0.0.0.
Next Hop
The IP address of the next hop through which traffic will flow towards
the destination subnet.
Metric
Defines the number of hops between network nodes that data packets
travel. The default value is 0, which means that the subnet is directly one
hop away on the local LAN network.
Interface
The WAN interface to which a static routing subnet is to be applied.
Function buttons for second section:
Add Route
Add a user-defined destination route.
Update
Update the selected destination route on the
Static Route Table
.
Delete Selected
Delete a selected destination route on the
Static Route Table
.
Show Routes
Click this button to view the DSL device’s routing table.
When
Show Routes
is clicked
Page 64 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
64
Fields in this page:
Field
Description
Destination
The IP Address of the destination.
Subnet Mask
The Subnet Mask address of the destination.
Next Hop
The Next Hop IP address.
Metric
Defines the number of hops between network nodes that data packets
travel.
Interface
The WAN interface to which a static routing subnet is to be applied.
Function buttons in this page:
Refresh
Click to display updated data since you opened this page.
Close
Click to close the window and go back to the main menu.
4.7.4
SNMP Configuration
Simple Network Management Protocol (SNMP) is a troubleshooting and management
protocol that uses the UDP protocol on port 161 to communicate between clients and
servers. The DSL device can be managed locally or remotely by SNMP protocol.
Page 65 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
65
Fields in this page:
Field
Description
System Description
System description of the DSL device.
System Contact
Contact person and/or contact information for the DSL device.
System Name
An administratively assigned name for the DSL device.
System Location
The physical location of the DSL device.
System Object ID
Vendor object identifier. The vendor’s authoritative identification of the
network management subsystem contained in the entity.
Trap IP Address
Destination IP address of the SNMP trap.
Community name
(read-only)
Name of the read-only community. This read-only community allows
read operation to all objects in the MIB.
Community name
(write-only)
Name of the write-only community. This write-only community allows
write operation to the objects defines as read-writable in the MIB.
Function buttons in this page:
Apply Changes
Set new configuration. New parameters will take effect after save into flash memory and
reboot the system. See section “Admin” for save details.
Undo
Discard your changes

Rate

4 / 5 based on 3 votes.

Popular LogN Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top