Page 71 / 85 Scroll up to view Page 66 - 70
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
71
Function buttons in this page:
Add
Click Add to add this registration into the configuration.
Modify
Select an existing DDNS registration by clicking the radio button at the
Select
column of the
Dynamic DNS Table
. Click
Modify
button to modify the selected registration with the new
configuration.
Remove
Select an existing DDNS registration by clicking the radio button at the
Select
column of the
Dynamic DNS Table
. Click
Remove
button to remove the selected registration from the
configuration.
4.7.9
ACL
The Access Control List (ACL) is a list of permissions attached to the DSL device. The list
specifies who is allowed to access this device. If ACL is enabled, all hosts cannot access this
device except for the hosts with IP address in the ACL table. It has two directions; LAN and
WAN
Page 72 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
72
4.7.9.1
ACL LAN
Fields in this page:
Field
Description
LAN ACL Switch
Select to Enable or Disable the LAN ACL Switch then Press Apply
IP address
Select the LAN IP address that you want to control his access
Services Allowed
Select the type of Service the LAN user can access the device through
Function buttons in this page:
Apply
Save configuration to system.
Add
Click Add to add this registration into the
Current ACL Table
.
Reset
Click to discard your changes
Page 73 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
73
4.7.9.2
ACL WAN
Fields in this page:
Field
Description
WAN Settings
Select Between filtering by Interface or IP address
WAN Interface
Select your Interface, If the services is filtered by Interface
WAN IP Address
Type your IP, If the services is filtered by IP
Services Allowed
Select the type of Service the LAN user can access the device through
Function buttons in this page:
Add
Click Add to add this registration into the
Current ACL Table
.
Reset
Click to discard your changes
Current ACL Table shows the summary of the ACL for both LAN and WAN users.
Page 74 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
74
4.7.10
Other
Fields in this page:
Field
Description
Half bridge
To enable or disable Half Bridge mode.
Interface
The WAN interface available to be selected.
Function buttons in this page:
Apply Changes
Set new configuration. New parameters will take effect after save into flash memory and
reboot the system. See section “Admin” for save details.
Undo
Discard your changes
4.8
Admin
Page 75 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
75
4.8.1
Save & Reboot
Save Current Configuration >>
Apply
apply the current configuration
Factory Default Configuration >>
Apply
…apply the
factory default configuration
Reset
>> discard your changes
Reboot
>> restart the modem
4.8.2
Backup/Restore
This page allows you to backup and restore your configuration into and from file in your
host.
Save Settings to File >>
Save
…select where in PC to
save the file
Load Settings from File >>
Browse
…select where in PC to take the file >>
Upload
…to
apply the setting in the file
4.8.3
System Log
This page shows the system log.

Rate

3.5 / 5 based on 2 votes.

Popular LogN Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top