Page 76 / 85
Scroll up to view Page 71 - 75
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
76
System Log
…select to enable or disable >>
Apply Changes
…to apply your selection
Save Log to File >>
Save
…select where in PC to save the file
Clear Log >>
Reset
…click to clear the log
Refresh
>> click to update the log with latest information
4.8.4
Password
The first time you log into the system, you use the default password. There are two-level
logins:
admin
and
user
. The
admin
and
user
password configuration allows you to change
the password for administrator and user.
Page 77 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
77
Fields in this page:
Field
Description
User Name
Selection of user levels are: admin and user.
Old Password
Enter the old password for this selected login.
New Password
Enter the new password here.
Confirmed
Password
Enter the new password here again to confirm.
Function buttons in this page:
Apply Changes
Set new configuration. New parameters will take effect after save into flash memory and
reboot the system. See section “Admin” for save details.
Reset
Discard your changes
Page 78 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
78
4.8.5
Upgrade Firmware
To upgrade the firmware for the DSL device:
Click the
Browse
button to select the firmware file.
Confirm your selection.
Click the
Upload
button to start upgrading.
IMPORTANT!
Do not turn off your DSL device or press the Reset button while this
procedure is in progress.
4.8.6
Time Zone
Simple Network Timing Protocol (SNTP) is a protocol used to synchronize the system time
to the public SNTP servers. The DSL device supports SNTP client functionality in compliance
with IETF RFC2030. SNTP client functioning in daemon mode which issues sending client
requests to the configured SNTP server addresses periodically can configure the system
clock in the DSL device
Page 79 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
79
Fields in first section in this page:
Field
Description
System Time
The current time of the specified time zone. You can set the current time
by yourself or configured by SNTP.
Function buttons for first section:
Apply Changes
Set new configuration. New parameters will take effect after save into flash memory and
reboot the system. See section “Admin” for save details.
Reset
Discard your changes
Fields in second section in this page:
Page 80 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
80
Field
Description
State
Enable or Disable mode
NTP Server
Network Time Protocol servers available as preset.
Interval
Grasp period for next synchronize of time with NTP server.
Time Zone
User local time zone.
GMT time
Greenwich Mean Time
Function buttons for second section:
Apply Changes
Set new configuration. New parameters will take effect after save into flash memory and
reboot the system. See section “Admin” for save details.
Reset
Discard your changes
Get GMT Time
Greenwich Mean Time
4.8.7
Green AP
Function buttons for second section:
Apply Changes
Set new configuration. New parameters will take effect after save into flash memory and
reboot the system. See section “Admin” for save details.
4.8.8
TR-069 Config (Optional)
TR-069 is a protocol for communication between a CPE and Auto-Configuration Server
(ACS). The CPE TR-069 configuration should be well defined to be able to communicate with
19216811.live