26

Chapter 5: Setting up the Wireless-G Router for HSDPA/3G/UMTS or GPRS Service

Using the Setup Wizard

Wireless-G Router for 3G/UMTS Broadband

WPA-Personal

To use WPA-Personal security, enter a Passphrase that is 8-32 characters in length.

Passphrase

- Enter a passphrase, also called a pre-shared key, of 8-63 characters in the

Passphrase

field.

The longer and more complex your Passphrase is, the more secure your network will be.

Click the

Next

button to continue or the

Back

button to return to the previous screen.

WEP (64-Bit)

Enter a passphrase or WEP key.

Passphrase

- Enter a passphrase, and then click the

Generate

button, so a WEP key is automatically

generated. The passphrase is case-sensitive and should not be longer than 16 alphanumeric characters. It

must match the passphrase of your other wireless network devices and is compatible with Linksys wireless

products only. (For any non-Linksys wireless products, enter the WEP key manually on those products.)

Key 1

- The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption,

enter exactly 10 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.

Click the

Next

button.

WEP (128-Bit)

Enter a passphrase or WEP key.

Passphrase

- Enter a passphrase, and then click the

Generate

button, so a WEP key is automatically

generated. The passphrase is case-sensitive and should not be longer than 16 alphanumeric characters. It

must match the passphrase of your other wireless network devices and is compatible with Linksys wireless

products only. (For any non-Linksys wireless products, enter the WEP key manually on those products.)

Key 1

- The WEP key you enter must match the WEP key of your wireless network. For 128-bit encryption,

enter exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.

Click the

Next

button.

Figure 5-17: Configure Wireless Security Settings -

WPA-Personal Screen

Figure 5-18: Configure Wireless Security Settings - WEP

(128-Bit) Screen

Downloaded from

www.Manualslib.com

manuals search engine

27

Chapter 5: Setting up the Wireless-G Router for HSDPA/3G/UMTS or GPRS Service

Using the Setup Wizard

Wireless-G Router for 3G/UMTS Broadband

18. The Setup Wizard will ask you to review your settings before it saves them. Click the

Yes

button if you are

satisfied with your settings, or click the

No

button if you do not want to save your new settings.

19. The

Congratulations

screen will appear. Click the

Online Registration

button to register the Router, or click

the

Exit

button to exit the Setup Wizard.

Congratulations! The installation of the Wireless-G Router for 3G/UMTS Broadband is complete.

If you want to make advanced configuration changes, proceed to “Chapter 8: Configuring the Wireless-G

Router for 3G/UMTS Broadband.”

Figure 5-19: Confirm New Settings Screen

Figure 5-20: Congratulations Screen

Downloaded from

www.Manualslib.com

manuals search engine

28

Chapter 6: Setting up the Wireless-G Router for Broadband WAN Service Only

Overview

Wireless-G Router for 3G/UMTS Broadband

Chapter 6: Setting up the Wireless-G Router for

Broadband WAN Service Only

Overview

This chapter covers the steps for configuring the Router for broadband WAN service only, such as cable or DSL

service. If you want to configure the Router for HSDPA/3G/UMTS or GPRS service only, go to “Chapter 5: Setting

up the Wireless-G Router for HSDPA/3G/UMTS or GPRS Service.” If you want to configure the Router for

broadband WAN and HSDPA/3G/UMTS or GPRS service, go to “Chapter 7: Setting up the Wireless-G Router for

Broadband WAN and HSDPA/3G/UMTS or GPRS Service.”

Before You Begin

Before you begin, make sure that you have the following:

•

broadband modem

•

settings for your Internet connection type.

The information about your Internet connection type should have been provided when your broadband modem

was installed. If you do not have this information, contact your Internet Service Provider (ISP) for your settings.

Using the Setup Wizard

1.

Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the

Welcome

screen should appear. If it does not, click the

Start

button and choose

Run

. In the field that appears,

enter

D:\SetupWizard.exe

(if “D” is the letter of your CD-ROM drive).

2.

The Setup Wizard will automatically detect the language setting of your PC. On the initial

Welcome

screen,

click the

Next

button if you want to proceed with the Setup Wizard using the current language. If you want to

use a different language, select the appropriate language, and then click the

Next

button.

IMPORTANT:

If you want to configure the Router for HSDPA/3G/UMTS or GPRS service in

addition to broadband WAN service, proceed to “Chapter 7: Setting up the Wireless-G Router for

Broadband WAN and HSDPA/3G/UMTS or GPRS Service.”

Figure 6-1: Setup Wizard’s Welcome - Language

Selection Screen

Downloaded from

www.Manualslib.com

manuals search engine

29

Chapter 6: Setting up the Wireless-G Router for Broadband WAN Service Only

Using the Setup Wizard

Wireless-G Router for 3G/UMTS Broadband

3.

On the following

Welcome

screen, click the

Click Here to Start

button if this is the first time you are running

the Setup Wizard. These are your other choices:

User Guide

- Click the

User Guide

button to open the PDF file of this User Guide.

Exit

- Click the

Exit

button to exit the Setup Wizard.

4.

Click the

Broadband WAN Only

radio button to configure the Router for broadband WAN service.

Figure 6-2: Setup Wizard’s Welcome - Start

Wizard Screen

Figure 6-3: Select Service Screen

NOTE:

If you click the

3G/UMTS or GPRS

radio button to configure the Router for HSDPA/3G/

UMTS service only, go to “Chapter 5: Setting up the Wireless-G Router for HSDPA/3G/UMTS or

GPRS Service.” If you click the

Broadband WAN and 3G/UMTS or GPRS

radio button to

configure the Router for broadband WAN and HSDPA/3G/UMTS or GPRS service, go to “Chapter

7: Setting up the Wireless-G Router for Broadband WAN and HSDPA/3G/UMTS or GPRS Service.”

Downloaded from

www.Manualslib.com

manuals search engine

30

Chapter 6: Setting up the Wireless-G Router for Broadband WAN Service Only

Using the Setup Wizard

Wireless-G Router for 3G/UMTS Broadband

5.

Make sure the Router is powered off.

6.

Disconnect the Ethernet network cable from your computer. (This is the cable that connects the computer to

your modem.) Then click the

Next

button.

7.

Connect the cable from the modem to the Internet port on the Router. (This is the same cable that you just

disconnected from your computer.) Click the

Next

button.

Figure 6-4: Disconnect the Modem from the Computer

Screen

Figure 6-5: Connect the Modem to the Router Screen

Downloaded from

www.Manualslib.com

manuals search engine