1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WRT54G3G
    5. /
  5. 6
Page 26 / 165 Scroll up to view Page 21 - 25
16
Chapter 4: Connecting the Wireless-G Router for 3G/UMTS Broadband
Placement Options
Wireless-G Router for 3G/UMTS Broadband
Wall-Mount Option
The Router has four wall-mount slots on its bottom panel. The distance between two adjacent slots is
68 mm (2,68 inches).
Before you begin, make sure you have two screws that are size #4—this indicates a diameter measurement of
2,845 mm (0,112 inches).
1.
Determine where you want to mount the Router.
2.
Drill two holes into the wall. Make sure adjacent holes are 68 mm (2,68 inches) apart.
3.
Insert a screw into each hole, and leave 5 mm (0,2 inches) of its head exposed.
4.
Maneuver the Router so the top wall-mount slots line up with the two screws.
5.
Place the wall-mount slots over the screws and slide the Router down until the screws fit snugly into the wall-
mount slots.
If you want to configure the Router for HSDPA/3G/UMTS or GPRS service only, go to “Chapter 5: Setting
up the Wireless-G Router for HSDPA/3G/UMTS or GPRS Service.”
If you want to configure the Router for broadband WAN service only, go to “Chapter 6: Setting up the
Wireless-G Router for Broadband WAN Service Only.”
If you want to configure the Router for broadband WAN and HSDPA/3G/UMTS or GPRS service, go to
“Chapter 7: Setting up the Wireless-G Router for Broadband WAN and HSDPA/3G/UMTS or GPRS Service.”
Figure 4-11: Measurement between Wall-Mount Slots
68 mm
(2,68 inches)
Downloaded from
www.Manualslib.com
manuals search engine
Page 27 / 165
17
Chapter 5: Setting up the Wireless-G Router for HSDPA/3G/UMTS or GPRS Service
Overview
Wireless-G Router for 3G/UMTS Broadband
Chapter 5: Setting up the Wireless-G Router for
HSDPA/3G/UMTS or GPRS Service
Overview
This chapter covers the steps for configuring the Router for HSDPA/3G/UMTS or GPRS service. If you want to
configure the Router for broadband WAN service only, go to “Chapter 6: Setting up the Wireless-G Router for
Broadband WAN Service Only.” If you want to configure the Router for broadband WAN and HSDPA/3G/UMTS or
GPRS service, go to “Chapter 7: Setting up the Wireless-G Router for Broadband WAN and HSDPA/3G/UMTS or
GPRS Service.”
Before You Begin
Before you begin, make sure that you have the following:
•
your Vodafone Mobile Connect Card
•
the SIM card for your Vodafone Mobile Connect Card
•
your Vodafone Mobile Connect Card Services information.
The information about your Vodafone Mobile Connect Card was included with your Vodafone Mobile Connect Card
package. If you do not have this information, contact Vodafone Customer Service (refer to “Appendix J: Contact
Information” for Vodafone contact information).
IMPORTANT:
If you do NOT have your Vodafone Mobile Connect Card and SIM card, you cannot
configure the Router for HSDPA/3G/UMTS or GPRS service. However, you can configure the
Router for broadband WAN service; for instructions, proceed to “Chapter 6: Setting up the
Wireless-G Router for Broadband WAN Service Only.”
Downloaded from
www.Manualslib.com
manuals search engine
Page 28 / 165
18
Chapter 5: Setting up the Wireless-G Router for HSDPA/3G/UMTS or GPRS Service
Using the Setup Wizard
Wireless-G Router for 3G/UMTS Broadband
Using the Setup Wizard
1.
Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome
screen should appear. If it does not, click the
Start
button and choose
Run
. In the field that appears,
enter
D:\SetupWizard.exe
(if “D” is the letter of your CD-ROM drive).
2.
The Setup Wizard will automatically detect the language setting of your PC. On the initial
Welcome
screen,
click the
Next
button if you want to proceed with the Setup Wizard using the current language. If you want to
use a different language, select the appropriate language, and then click the
Next
button.
3.
On the following
Welcome
screen, click the
Click Here to Start
button if this is the first time you are running
the Setup Wizard. These are your other choices:
User Guide
- Click the
User Guide
button to open the PDF file of this User Guide.
Exit
- Click the
Exit
button to exit the Setup Wizard.
Figure 5-1: Setup Wizard’s Welcome - Language
Selection Screen
Figure 5-2: Setup Wizard’s Welcome - Start
Wizard Screen
Downloaded from
www.Manualslib.com
manuals search engine
Page 29 / 165
19
Chapter 5: Setting up the Wireless-G Router for HSDPA/3G/UMTS or GPRS Service
Using the Setup Wizard
Wireless-G Router for 3G/UMTS Broadband
4.
Click the
3G/UMTS or GPRS
radio button to configure the Router for HSDPA/3G/UMTS or GPRS service.
5.
Make sure the Router is powered off. Then follow the instructions provided by Vodafone to insert your
Vodafone SIM card into your Vodafone Mobile Connect HSDPA/3G/UMTS Card.
6.
Insert your Vodafone Mobile Connect HSDPA/3G/UMTS Card into the Router’s 3G/UMTS slot on the top panel of
the Router. Then click the
Next
button.
Figure 5-3: Select Service Screen
Figure 5-4: Insert Vodafone Mobile Connect Card Screen
NOTE:
If you click the
Broadband WAN Only
radio button to configure the Router for broadband
WAN service only, go to “Chapter 6: Setting up the Wireless-G Router for Broadband WAN
Service Only.” If you click the
Broadband WAN and 3G/UMTS or GPRS
radio button to
configure the Router for broadband WAN and HSDPA/3G/UMTS or GPRS service, go to “Chapter
7: Setting up the Wireless-G Router for Broadband WAN and HSDPA/3G/UMTS or GPRS Service.”
Downloaded from
www.Manualslib.com
manuals search engine
Page 30 / 165
20
Chapter 5: Setting up the Wireless-G Router for HSDPA/3G/UMTS or GPRS Service
Using the Setup Wizard
Wireless-G Router for 3G/UMTS Broadband
7.
Connect the included Ethernet network cable to the Ethernet network port of your computer. (This cable is
color-coded yellow to match the yellow Ethernet ports on the Router.)
Click the
Next
button.
8.
Connect the other end of the cable to one of the Ethernet ports labeled 1-4 on the side panel of the Router.
Then connect additional computers or other devices to the Router.
Click the
Next
button.
Figure 5-5: Connect the Router to a Computer Screen
Figure 5-6: Connect the Router to a Computer Screen,
Continued
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top