14

Chapter 5: Windows Driver Installation

Installation

Wireless-G PrintServer for USB 2.0

4.

The

Welcome

screen of the driver installation program, Figure 5-2, will appear first. Click

Cancel

to quit the

setup program and then close the open programs. Click

Next

to continue with the driver installation.

5.

The

Choose Destination Location

screen, as shown in Figure 5-3, will appear. Choose the location where the

driver’s folder will be installed. To install the driver in the default location, click

Next

. If you want the folder to

be installed in a different location, click the

Browse

button and select the location. Then click

Next

.

Click

Back

to return to the previous screen. Click

Cancel

to end the driver installation.

Figure 5-3: Choose Destination Location

Figure 5-2: Driver Setup Welcome

Downloaded from

www.Manualslib.com

manuals search engine

15

Chapter 5: Windows Driver Installation

Installation

Wireless-G PrintServer for USB 2.0

6.

The

Select Program Folder

screen will appear, as shown in Figure 5-4. An icon will be added to the program

folder listed. You may change the name for the program folder, if you wish. Click

Next

.

Click

Back

to return to the previous screen. Click

Cancel

to end the driver installation.

7.

When the driver is installed, the

Setup Complete

screen, Figure 5-5, will appear. The Print Driver must still be

configured, so make sure that

Configure Print Driver now

is selected. Click

Finish

to end the driver

installation and begin the driver configuration.

Figure 5-4: Select Program Folder

Figure 5-5: Setup Complete

Downloaded from

www.Manualslib.com

manuals search engine

16

Chapter 5: Windows Driver Installation

Starting the Print Driver Utility

Wireless-G PrintServer for USB 2.0

Starting the Print Driver Utility

1.

Click

Start

,

Programs

,

Print Server Utility

, and then

Print Driver Setup

. If the Print Driver Setup icon has

been created, you can double-click it instead.

2.

The

Information

screen will appear; see Figure 5-6. Read the on-screen information, and then click

OK

.

3.

The

Printer Port Setup

screen will appear, as shown in Figure 5-7, and list the PrintServer and its ports. Select

a printer port to add, and then click

Next

.

If the PrintServer or printer isn’t listed, make sure that the cable connections are good and the PrintServer

and printer are powered on.

4.

You will be informed that the PrintServer Port has been added successfully. Click

OK

.

Figure 5-7: Printer Port Setup

Figure 5-6: Information

Downloaded from

www.Manualslib.com

manuals search engine

17

Chapter 5: Windows Driver Installation

Starting the Print Driver Utility

Wireless-G PrintServer for USB 2.0

5.

The

Configure Printer Port

screen will appear, as shown in Figure 5-8. Your installed printer(s) will appear in

the field. Select the printer you want, and click the

Connect

button to associate the printer with your selected

printer port. To add another printer, click the

Add New Printer

button.

Click

Cancel

to cancel the setup.

6.

Click

Close

to close the

Printer Port Setup

screen. Click

Refresh

to refresh the screen.

7.

The driver installation and configuration is complete. You can now use the PrintServer.

If you would like to change the PrintServer’s settings, use the PrintServer’s web-based utility. For more

information, refer to “Chapter 6: Configuring the PrintServer Using the Web-based Utility.”

Figure 5-8: Configure Printer Port

Downloaded from

www.Manualslib.com

manuals search engine

18

Chapter 6: Configuring the PrintServer Using the Web-based Utility

Overview

Wireless-G PrintServer for USB 2.0

Chapter 6: Configuring the PrintServer Using the

Web-based Utility

Overview

After setting up the PrintServer with the Setup Wizard, the PrintServer will be ready for use. However, if you’d like

to change its advanced settings, use the PrintServer’s web-based utility. This chapter will describe each web

page of the utility and each page’s key functions. The utility can be accessed via your web browser through the

use of a networked computer.

There are six main tabs: Setup, Protocol, Wireless, Printer, Status, and Exit. Additional tabs will be available after

you click one of the main tabs.

To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the PrintServer’s IP

address in the

Address

field. Then press

Enter

.

You will be asked to enter a User name and Password (see Figure 6-1). Leave the

User name

field blank, and

enter

admin

in the

Password

field. Then click the

OK

button.

The Setup Tab

The first screen that appears is the Setup tab and allows you to change the PrintServer’s general settings.

Device Name

. Enter the PrintServer’s name in the field provided. The name is located on a sticker on the bottom

of the PrintServer.

Password

. To change the PrintServer’s password, enter the current password in the

Current Password

field.

Enter the new password in the

New Password

field, and then enter the new password again in the

Verify

Password

field.

Protocols.

Check the box(es) for AppleTalk or NetBEUI, if they are used by your network.

Click the

Save

button to apply your changes, or click

Cancel

to cancel your changes.

Figure 6-1: Password to Access Web-based Utility

NOTE:

Use the PrintServer’s IP address that you noted when you ran the Setup Wizard. Otherwise,

insert the Setup CD-ROM, and when the

Welcome

screen appears, click

Setup Wizard

. Follow the

instructions until you reach the

Wireless-G PrintServer Setup

screen. Note the IP address, and then

click

Back

until you reach the

Welcome

screen. Click

Exit

.

Figure 6-2: Setup

Downloaded from

www.Manualslib.com

manuals search engine