Linksys WPS54GU2 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Linksys WPS54GU2 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 76
A Division of Cisco Systems, Inc.
®
Model No.
PrintServer for USB 2.0
Wireless-
G
WPS54GU2
User Guide
WIRELESS
GHz
2.4
802.11g
Downloaded from
www.Manualslib.com
manuals search engine
Page 2 / 76
Wireless-G PrintServer for USB 2.0
Copyright and Trademarks
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco
Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2003 Cisco Systems, Inc. All
rights reserved. Other brands and product names are trademarks or registered trademarks of their respective
holders.
How to Use this User Guide
This User Guide has been designed to make understanding networking with the PrintServer easier than ever.
Look for the following items when reading this User Guide:
In addition to these symbols, there are definitions for technical terms that are presented like this:
Also, each figure (diagram, screenshot, or other image) is provided with a figure number and description, like
this:
Figure numbers and descriptions can also be found in the “List of Figures” section in the “Table of Contents”.
This exclamation point means there is a caution or
warning and is something that could damage your
property or the PrintServer.
This checkmark means there is a note of interest and
is something you should pay special attention to
while using the PrintServer.
This question mark provides you with a reminder
about something you might need to do while using
the PrintServer.
word:
definition.
Figure 0-1: Sample Figure Description
WPS54GU2-UG-30821NC JL
Downloaded from
www.Manualslib.com
manuals search engine
Page 3 / 76
Wireless-G PrintServer for USB 2.0
Table of Contents
Chapter 1: Introduction
1
Welcome
1
What’s in this Guide?
1
Chapter 2: Getting to Know the PrintServer
3
The Back Panel
3
The Front Panel
4
Chapter 3: Connecting the PrintServer
5
Overview
5
Connecting the PrintServer to Your Network
5
Chapter 4: Configuring the PrintServer Using the Setup Wizard
6
Installation
6
Chapter 5: Windows Driver Installation
13
Overview
13
Installation
13
Starting the Print Driver Utility
16
Chapter 6: Configuring the PrintServer Using the Web-based Utility
18
Overview
18
The Setup Tab
18
The Protocol Tab - TCP/IP
19
The Protocol Tab - AppleTalk
19
The Protocol Tab - NetBEUI
20
The Protocol Tab - SNMP
21
The Wireless Tab - Basic
22
The Wireless Tab - Security
23
The Printer Tab - Internet Printing
24
The Printer Tab - Logical Port
25
The Status Tab - Device
26
The Status Tab - Wireless
27
The Exit Tab
27
Chapter 7: Bi-Admin Management
28
Overview
28
Bi-Admin Installation
28
Downloaded from
www.Manualslib.com
manuals search engine
Page 4 / 76
Wireless-G PrintServer for USB 2.0
Starting the Bi-Admin Management Utility
30
The Bi-Admin Management Utility
31
Chapter 8: Internet Printing Protocol (IPP)
42
Overview
42
Windows IPP Client Setup
42
Appendix A: Troubleshooting
46
Common Problems and Solutions
46
Appendix B: Wireless Security
48
A Brief Overview
48
What Are The Risks?
48
Appendix C: About Bi-Directional Printing
55
Appendix D: Upgrading Firmware
56
Appendix E: Windows Help
57
Appendix F: Glossary
58
Appendix G: Specifications
64
Appendix H: Warranty Information
65
Appendix I: Regulatory Information
66
Appendix J: Contact Information
69
Downloaded from
www.Manualslib.com
manuals search engine
Page 5 / 76
Wireless-G PrintServer for USB 2.0
List of Figures
Figure 2-1: PrintServer’s Back Panel
3
Figure 2-2: PrintServer’s Front Panel
4
Figure 3-1: Connecting to the LAN Port
5
Figure 3-2: Connecting to the USB Port
5
Figure 3-3: Connecting to the Parallel Port
5
Figure 3-4: Connecting to the Power Port
5
Figure 4-1: Welcome
6
Figure 4-2: Wireless-G PrintServer Setup
6
Figure 4-3: Password
7
Figure 4-4: Basic Settings
7
Figure 4-5: IP Settings
8
Figure 4-6: Set PrintServer’s Password
8
Figure 4-7: Wireless Settings
9
Figure 4-8: Wireless Security Settings
10
Figure 4-9: Wireless Security Settings - WEP Key
11
Figure 4-10: Confirmation
11
Figure 4-11: Congratulations
12
Figure 5-1: Welcome
13
Figure 5-2: Driver Setup Welcome
14
Figure 5-3: Choose Destination Location
14
Figure 5-4: Select Program Folder
15
Figure 5-5: Setup Complete
15
Figure 5-6: Information
16
Figure 5-7: Printer Port Setup
16
Figure 5-8: Configure Printer Port
17
Figure 6-1: Password to Access Web-based Utility
18
Figure 6-2: Setup
18
Figure 6-3: Protocol Tab - TCP/IP
19
Figure 6-4: Protocol Tab - AppleTalk
19
Figure 6-5: Protocol Tab - NetBEUI
20
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top