1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. SPA-1001
    5. /
  5. 19
Page 91 / 186 Scroll up to view Page 86 - 90
5-7
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5
Linksys ATA Field Reference
Info Tab
VoIP Call Packets Lost
Same as Line 1 Call 1.
VoIP Call Packet Error
Same as Line 1 Call 1.
VoIP Call Mapped RTP Port
Same as Line 1 Call 1.
Page 92 / 186
5-8
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5
Linksys ATA Field Reference
System Tab
System Tab
This section describes the fields for the following headings on the System tab:
•
System Configuration, page 5-8
•
Internet Connection Type (PAP2T), page 5-8
•
Optional Network Configuration (PAP2T), page 5-9
•
Miscellaneous Settings (Not in PAP2T), page 5-10
System Configuration
Internet Connection Type (PAP2T)
Field
Description
Restricted Access Domains
This feature is used when implementing software customization.
Enable Web Server
Enable/disable web server of Linksys IP phone
This feature should only be used on firmware version 1.0.9 or later.
The default is yes.
Web Server Port
Port number of the Linksys IP phone administration web server.
The default is 80.
Enable Web Admin Access
Lets you enable or disable local access to the administration web server. Select yes or no
from the drop-down menu.
The default is yes.
Admin Passwd
Password for the administrator.
The default is no password.
User Password
Password for the user.
The default is no password.
Field
Description
DHCP
Enable or disable DHCP.
The default is yes.
Static IP
Static IP address of Linksys IP phone, which takes effect if DHCP is disabled.
The default is 0.0.0.0.
NetMask
The NetMask used by Linksys IP phone when DHCP is disabled.
The default is 255.255.255.0.
Page 93 / 186
5-9
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5
Linksys ATA Field Reference
System Tab
Optional Network Configuration (PAP2T)
Gateway
The default gateway used by Linksys IP phone when DHCP is disabled.
The default is 0.0.0.0.
Field
Description
Field
Description
Host Name
The host name of the Linksys IP phone.
Domain
The network domain of the Linksys IP phone.
Primary DNS
DNS server used by Linksys IP phone in addition to DHCP supplied DNS servers if
DHCP is enabled; when DHCP is disabled, this is the primary DNS server.
The default is 0.0.0.0.
Secondary DNS
DNS server used by Linksys IP phone in addition to DHCP supplied DNS servers if
DHCP is enabled; when DHCP is disabled, this is the secondary DNS server.
The default is 0.0.0.0.
DNS Server Order
Specifies the method for selecting the DNS server. The options are Manual,
Manual/DHCP, and DHCP/Manual.
DNS Query Mode
Do parallel or sequential DNS Query.
With parallel DNS query mode, the Linksys IP
phone sends the same request to all the DNS servers at the same time when doing a DNS
lookup, the first incoming reply is accepted by the Linksys IP phone.
The default is parallel.
Syslog Server
Specify the syslog server name and port. This feature specifies the server for logging
Linksys IP phone system information and critical events. If both Debug Server and Syslog
Server are specified, Syslog messages are also logged to the Debug Server.
Debug Server
The debug server name and port. This feature specifies the server for logging Linksys IP
phone debug information. The level of detailed output depends on the debug level
parameter setting.
Debug Level
The higher the debug level, the more debug information is generated. Zero (0) means no
debug information is generated. To log SIP messages, Debug Level must be set to at least
2.
The default is 0.
Primary NTP Server
IP address or name of primary NTP server.
Secondary NTP Server
IP address or name of secondary NTP server.
Page 94 / 186
5-10
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5
Linksys ATA Field Reference
System Tab
Miscellaneous Settings (Not in PAP2T)
Field
Description
Syslog Server
Specifies the IP address of the syslog server.
Debug Server
Specifies the IP address of the debug server, which logs debug information. The level of
detailed output depends on the debug level parameter setting.
Debug Level
Determines the level of debug information that is generated. Select 0, 1, 2, or 3 from the
drop-down menu. The higher the debug level, the more debug information is generated.
The default is 0, which indicates that no debug information is generated.
Page 95 / 186
5-11
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5
Linksys ATA Field Reference
SIP Tab
SIP Tab
This section describes the fields for the following headings on the SIP tab:
•
SIP Parameters, page 5-11
•
SIP Timer Values (sec), page 5-12
•
Response Status Code Handling, page 5-14
•
RTP Parameters, page 5-14
•
SDP Payload Types, page 5-15
•
NAT Support Parameters, page 5-16
SIP Parameters
Field
Description
Max Forward
SIP Max Forward value, which can range from 1 to 255.
The default is 70.
Max Redirection
Number of times an invite can be redirected to avoid an infinite loop.
The default is 5.
Max Auth
Maximum number of times (from 0 to 255) a request may be challenged.
The default is 2.
SIP User Agent Name
User-Agent header used in outbound requests.
The default is $VERSION. If empty, the header is not included. Macro expansion of $A
to $D corresponding to GPP_A to GPP_D allowed.
SIP Server Name
Server header used in responses to inbound responses.
The default is $VERSION.
SIP Reg User Agent Name
User-Agent name to be used in a REGISTER request. If this is not specified, the <SIP User
Agent Name> is also used for the REGISTER request.
The default is blank.
SIP Accept Language
Accept-Language header used. There is no default (this indicates Linksys IP phone does
not include this header). If empty, the header is not included.
DTMF Relay MIME Type
MIME Type used in a SIP INFO message to signal a DTMF event.
The default is application/dtmf-relay.
Hook Flash MIME Type
MIME Type used in a SIP INFO message to signal a hook flash event.
The default is application/hook-flash.
Remove Last Reg
Lets you remove the last registration before registering a new one if the value is different.
Select yes or
no from the drop-down menu.
The default is no.

Rate

4 / 5 based on 1 vote.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top