Page 86 / 186 Scroll up to view Page 81 - 85
5-2
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5
Linksys ATA Field Reference
Info Tab
Info Tab
This section describes the fields for the following headings on the Info tab:
System Information (PAP2T), page 5-2
System Status (VoIP), page 5-2
Line 1/2
Status, page 5-3
PSTN Line Status, page 5-5
Note
The fields on this tab are read-only and cannot be edited.
System Information (PAP2T)
System Status (VoIP)
Field
Description
DHCP
Indicates if DHCP is enabled.
Current IP
Displays the current IP address assigned to the Linksys IP phone.
Host Name
Displays the current IP address assigned to the Linksys IP phone.
Domain
Displays the network domain name of the Linksys IP phone.
Current Netmask
Displays the network mask assigned to the Linksys IP phone.
Current Gateway
Displays the default router assigned to the Linksys IP phone.
Primary DNS
Displays the primary DNS server assigned to the Linksys IP phone.
Secondary DNS
Displays the secondary DNS server assigned to the Linksys IP phone.
Field
Description
Current Time
Current date and time of the system; for example, 10/3/2003 16:43:00.
Elapsed Time
Total time elapsed since the last reboot of the system; for example, 25 days and 18:12:36.
Broadcast Pkts Sent
Total number of broadcast packets sent.
Broadcast Bytes Sent
Total number of broadcast packets received.
Broadcast Pkts Recv
Total number of broadcast bytes sent.
Broadcast Bytes Recv
Total number of broadcast bytes received and processed.
Page 87 / 186
5-3
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5
Linksys ATA Field Reference
Info Tab
Line 1/2
Status
Broadcast Pkts Dropped
Total number of broadcast packets received but not processed.
Broadcast Bytes Dropped
Total number of broadcast bytes received but not processed.
RTP Packets Sent
Total number of RTP packets sent (including redundant packets).
RTP Bytes Sent
Total number of RTP packets received (including redundant packets).
RTP Packets Recv
Total number of RTP bytes sent.
RTP Bytes Recv
Total number of RTP bytes received.
SIP Messages Sent
Total number of SIP messages sent (including retransmissions).
SIP Bytes Sent
Total number of SIP messages received (including retransmissions).
SIP Messages Recv
Total number of bytes of SIP messages sent (including retransmissions).
SIP Bytes Recv
Total number of bytes of SIP messages received (including retransmissions).
External IP
External IP address used for NAT mapping.
Field
Description
Current Time
Current date and time of the system; for example, 10/3/2003 16:43:00.
Field
Description
Display Name
The value that is shown through Caller ID.
User ID
The user ID assigned by the ITSP (often the phone number) used for registering the SIP
user agent with the SIP proxy at the ITSP.
Hazardous Potential
The amount of hazardous potential is displayed.
Foreign Voltage
The amount of foreign voltage is displayed.
Long Resistive Fault
The amount of long resistive fault is displayed.
REN
The Ringer Equivalence Number (REN) is displayed.
Hook State
Status of phone readiness. On indicates that the phone is ready for use; Off indicates that
the phone is in use.
Registration State
Indicates if the line has registered with the SIP proxy.
Last Registration At
Last date and time the line was registered.
Next Registration In
Number of seconds before the next registration renewal.
Page 88 / 186
5-4
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5
Linksys ATA Field Reference
Info Tab
Message Waiting
Indicates whether you have new voicemail waiting: Yes or No. This is updated when
voicemail notification is received. You can also manually modify it to clear or set the flag.
Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is
stored in long term memory and survives after reboot or power cycle.
Call Back Active
Indicates whether a call back request is in progress: Yes or No.
Last Called Number
Last number called.
Last Caller Number
Number of the last caller.
Mapped SIP Port
Port number of the SIP port mapped by NAT.
Call 1/2 State
Status of the call.
Call 1/2 Tone
Type of tone used by the call.
Call 1/2 Encoder
Codec used for encoding.
Call 1/2 Decoder
Codec used for decoding.
Call 1/2 FAX
Status of the fax pass-through mode.
Call 1/2 Type
Direction of the call.
Call 1/2 Remote Hold
Indicates whether the far end has placed the call on hold.
Call 1/2 Callback
Indicates whether the call was triggered by a call back request.
Call 1/2 Peer Name
Name of the internal phone.
Call 1/2 Peer Phone
Phone number of the internal phone.
Call 1/2 Duration
Duration of the call.
Call 1/2 Packets Sent
Number of packets sent.
Call 1/2 Packets Recv
Number of packets received.
Call 1/2 Bytes Sent
Number of bytes sent.
Call 1/2 Bytes Recv
Number of bytes received.
Call 1/2 Decode Latency
Number of milliseconds for decoder latency.
Call 1/2 Jitter
Number of milliseconds for receiver jitter.
Call 1/2 Round Trip Delay
Number of milliseconds for delay.
Call 1/2 Packets Lost
Number of packets lost.
Call 1/2 Packet Error
Number of invalid packets received.
Call 1/2 Mapped RTP Port
The port mapped for Real Time Protocol traffic for Call 1/2.
Page 89 / 186
5-5
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5
Linksys ATA Field Reference
Info Tab
PSTN Line Status
Note
References to the SPA3102 also apply to the AG310.
Field
Description
(PSTN) Hook State
Hook state of the FXO port. Either On or Off.
(PSTN) Line Voltage
The voltage existing on the PSTN line.
(PSTN) Loop Current
The current (milliamperes) existing on the local loop.
Registration State
Indicates if the line has registered with the SIP proxy.
Last Registration At
Last date and time the line was registered.
Next Registration In
Number of seconds before the next registration renewal.
Last Called VoIP Number
The last VoIP number called from the FXO Line.
Last Called PSTN Number
The PSTN number dialed by the SPA (logged only if a non-trivial dial plan is used).
Last VoIP Caller
The last VoIP caller to the FXO Line.
Last PSTN Caller
Name and number of the last PSTN caller.
Last PSTN Disconnect Reason
Reason for SPA hanging up the FXO port. Can be one of the following:
PSTN Disconnect Tone
PSTN Activity Timeout
CPC Signal
Polarity Reversal
VoIP Call Failed
VoIP Call Ended
Invalid VoIP Destination
Invalid PIN
PIN Digit Timeout
VoIP Dialing Timeout
PSTN Gateway Call Timeout
VoIP Gateway Call Timeout
PSTN Activity Timer
Shows the time (ms) before the SPA disconnects the current gateway unless the PSTN side
has some audio activity.
Mapped SIP Port
Same as Line 1.
Page 90 / 186
5-6
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5
Linksys ATA Field Reference
Info Tab
Call Type
May take one of the following values:
PSTN Gateway Call = VoIP-To-PSTN Call
VoIP Gateway Call = PSTN-To-VoIP Call
PSTN To Line 1 = PSTN call ring through and answered by Line 1
Line 1 Forward to PSTN Gateway = VoIP calls Line 1 then forwarded to PSTN GW
Line 1 Forward to PSTN Number =VoIP calls Line 1 then forwarded to PSTN number
Line 1 To PSTN Gateway
Line 1 Fallback To PSTN Gateway
VoIP State
Same as Line 1 Call 1.
PSTN State
May take one of the following values:
Idle
Collecting PSTN Pin
Invalid PSTN PIN
PSTN Caller Accepted
Connected to PSTN
VoIP Tone
Same as Line 1 Call 1 (Indicate what tone is being played to the VoIP call leg).
PSTN Tone
Indicate what tone is being played to the PSTN call leg.
VoIP Peer Name
Same as Line 1 Call 1 (Name of the party at the VoIP call leg).
PSTN Peer Name
Name of the party at the PSTN call leg.
VoIP Peer Number
Same as Line 1 Call 1 (Phone number of the party at the VoIP call leg).
PSTN Peer Number
Phone number of the party at the PSTN call leg.
VoIP Call Encoder
Same as Line 1 Call 1 (Audio encoder being used for the VoIP call leg).
VoIP Call Decoder
Same as Line 1 Call 1 (Audio decoder being used for the VoIP call leg).
VoIP Call FAX
Same as Line 1 Call 1.
VoIP Call Remote Hold
Same as Line 1 Call 1.
VoIP Call Duration
Same as Line 1 Call 1.
VoIP Call Packets Sent
Same as Line 1 Call 1.
VoIP Call Packets Recv
Same as Line 1 Call 1.
VoIP Call Bytes Sent
Same as Line 1 Call 1.
VoIP Call Bytes Recv
Same as Line 1 Call 1.
VoIP Call Decode Latency
Same as Line 1 Call 1.
VoIP Call Jitter
Same as Line 1 Call 1.
VoIP Call Round Trip Delay
Same as Line 1 Call 1.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top