1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. RV016
    5. /
  5. 21
Page 101 / 127 Scroll up to view Page 96 - 100
90
Appendix A: Troubleshooting
Common Problems and Solutions
10/100 16-Port VPN Router
A.
Access the Router’s web interface by going to
or the IP address of the Router. Enter
admin
(the default) in the
User Name
and
Password
fields, and click the
Setup
=>
Password
tab.
B.
Enter the old password in the
Old Password
field.
C.
Enter a different password in the
New Password
field, and enter the new password in the
Confirm New
Password
field to confirm the password.
D.
Click the
Save Settings
button.
13.I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up window.
If you have proxy settings, you need to disable these on your computer. Because the Router is the gateway for
the Internet connection, the computer does not need any proxy settings to gain access.
Please follow these
directions to verify that you do not have any proxy settings and that the browser you use is set to connect
directly to the LAN.
For Microsoft Internet Explorer 5.0 or higher:
A.
Click
Start
,
Settings
, and
Control Panel
. Double-click
Internet Options
.
B.
Click the
Connections
tab.
C.
Click the
LAN settings
button and remove anything that is checked.
D.
Click the
OK
button to go back to the previous screen.
E.
Click the option
Never dial a connection
.
This will remove any dial-up pop-ups for PPPoE users.
For Netscape 4.7 or higher:
A.
Start
Netscape Navigator
, and click
Edit
,
Preferences
,
Advanced
, and
Proxies
.
B.
Make sure you have
Direct connection to the Internet
selected on this screen.
C.
Close all the windows to finish.
14.To start over, I need to set the Router to factory default.
Hold the Reset button for up to 30 seconds and then release it. This will return the password, forwarding, and
other settings on the Router to the factory default settings. In other words, the Router will revert to its original
factory configuration.
15.I need to upgrade the firmware.
In order to upgrade the firmware with the latest features, you need to go to the Linksys website and download
the latest firmware at
www.linksys.com
. Follow these steps:
A.
Go to the Linksys website at
and download the latest firmware, or use the
Web-based Utility to be automatically redirected to the download webpage. Go to System Management -
Firmware Upgrade, and click the
Firmware Download from Linksys Web Site
button. Select the Router
from the pull-down menu and choose the firmware from the options.
B.
Extract the firmware file on your computer.
Downloaded from
www.Manualslib.com
manuals search engine
Page 102 / 127
91
Appendix A: Troubleshooting
Common Problems and Solutions
10/100 16-Port VPN Router
C.
To upgrade the firmware, follow the steps in the Upgrade section found in
“Chapter 6: Setting up and
Configuring the Router” or “Appendix B: Upgrading Firmware.”
16.The firmware upgrade failed.
The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware:
A.
Set a static IP address on the PC; refer to “Problem #1, I need to set a static IP address.” Use the following
IP address settings for the computer you are using:
IP Address: 192.168.1.50
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
B.
Perform the upgrade using the Router’s Web-based Utility through its System Management => Firmware
Upgrade tab.
If the firmware upgrade failed, the Router will still work using its current firmware.
If you want to use a backup firmware version, go to System Management => Restart. Select
Backup
Firmware Version
. Click the
Restart Router
button to restart the Router.
17.My DSL service’s PPPoE is always disconnecting.
PPPoE is not actually a dedicated or always-on connection.
The DSL ISP can disconnect the service after a
period of inactivity, just like a normal phone dial-up connection to the Internet.
There is a setup option to
“keep alive” the connection.
This may not always work, so you may need to re-establish connection
periodically.
A.
To connect to the Router, go to the web browser, and enter
or the IP address of the
Router.
B.
Enter the user name and password, if asked. (The default user name and password are admin.)
C.
On the
Setup - Network
tab, select
Keep Alive
, and set the
Redial Period
option at
20
(seconds).
D.
Click the
Save Settings
button.
E.
Click the
Status
tab, and click the
Connect
button.
F.
You may see the login status display as Connecting. Press the
F5
key to refresh the screen, until you see
the login status display as Connected.
If the connection is lost again, follow steps E and F to re-establish connection.
Downloaded from
www.Manualslib.com
manuals search engine
Page 103 / 127
92
Appendix A: Troubleshooting
Common Problems and Solutions
10/100 16-Port VPN Router
18.I can't access my email, web, or VPN, or I am getting corrupted data from the Internet.
The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set at 1500.
For most DSL users, it is strongly recommended to use MTU 1492.
If you are having some difficulties,
perform the following steps:
A.
To connect to the Router, go to the web browser, and enter
or the IP address of the
Router.
B.
Enter the user name and password, if asked. (The default user name and password are
admin
.)
C.
Go to Firewall => General tab.
D.
Look for the MTU option, and select
Enable
. In the
Size
field, enter 1492.
E.
Click the
Save Settings
button to continue.
If your difficulties continue, change the Size to different values. Try this list of values, one value at a time, in
this order, until your problem is solved:
1462
1400
1362
1300
19.I need to use port triggering.
Port triggering looks at the outgoing port services used and will trigger the Router to open a specific port,
depending on which port an Internet application uses.
Follow these steps:
A.
To connect to the Router, go to the web browser, and enter
or the IP address of the
Router.
B.
Enter the user name and password, if asked. (The default user name and password are
admin
.)
C.
Click the
Setup
=>
Forwarding
tab.
D.
Enter any name you want to use for the Application Name.
E.
Enter the Start and End Ports of the Triggered Port Range. Check with your Internet application provider
for more information on which outgoing port services it is using.
F.
Enter the Start and End Ports of the Forwarded Port Range. Check with your Internet application provider
for more information on which incoming port services are required by the Internet application.
Once completed with the configuration, click the
Save Settings
button.
20.When I enter a URL or IP address, I get a time-out error or am prompted to retry.
•
Check if other PCs work. If they do, ensure that your workstation’s IP settings are correct (IP Address,
Subnet Mask, Default Gateway, and DNS). Restart the computer that is having a problem.
Downloaded from
www.Manualslib.com
manuals search engine
Page 104 / 127
93
Appendix A: Troubleshooting
Frequently Asked Questions
10/100 16-Port VPN Router
•
If the PCs are configured correctly, but still not working, check the Router. Ensure that it is connected and
powered on. Connect to it and check its settings. (If you cannot connect to it, check the LAN and power
connections.)
•
If the Router is configured correctly, check your Internet connection (DSL/cable modem, etc.) to see if it is
working correctly. You can remove the Router to verify a direct connection.
•
Manually configure the TCP/IP with a DNS address provided by your ISP.
•
Make sure that your browser is set to connect directly and that any dial-up is disabled. For Internet
Explorer, click
Tools
,
Internet Options
, and then the
Connection
tab. Make sure that Internet Explorer is
set to
Never dial a connection
. For Netscape Navigator, click
Edit
,
Preferences
,
Advanced
, and
Proxy
.
Make sure that Netscape Navigator is set to
Direct connection to the Internet
.
Frequently Asked Questions
What is the maximum number of IP addresses that the Router will support?
The Router will support up to 253 IP addresses.
Is IPSec Passthrough supported by the Router?
Yes, enable or disable IPSec Passthrough on the VPN => VPN Pass Through tab.
Where is the Router installed on the network?
In a typical environment, the Router is installed between the cable/DSL modem and the LAN. Plug the Router into
the cable/DSL modem’s Ethernet port.
Does the Router support IPX or AppleTalk?
No. TCP/IP is the only protocol standard for the Internet and has become the global standard for communications.
IPX, a NetWare communications protocol used only to route messages from one node to another, and AppleTalk,
a communications protocol used on Apple and Macintosh networks, can be used for LAN to LAN connections, but
those protocols cannot connect from the Internet to the LAN.
What is Network Address Translation and what is it used for?
Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that
is sent out to the Internet. This adds a level of security since the address of a PC connected to the private LAN is
never transmitted on the Internet. Furthermore, NAT allows the Router to be used with low cost Internet
accounts, such as DSL or cable modems, when only one TCP/IP address is provided by the ISP. The user may
have many private addresses behind this single address provided by the ISP.
Does the Router support any operating system other than Windows 98, Millennium, 2000, or XP?
Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of
any non-Windows operating systems.
Downloaded from
www.Manualslib.com
manuals search engine
Page 105 / 127
94
Appendix A: Troubleshooting
Frequently Asked Questions
10/100 16-Port VPN Router
Does the Router support ICQ send file?
Yes, with the following fix: click
ICQ menu
=>
preference
=>
connections
tab=>, and check
I am behind a
firewall or proxy
. Then set the firewall time-out to 80 seconds in the firewall setting. The Internet user can then
send a file to a user behind the Router.
I set up an Unreal Tournament Server, but others on the LAN cannot join. What do I need to do?
If you have a dedicated Unreal Tournament server running, you need to create a static IP for each of the LAN
computers and forward ports 7777, 7778, 7779, 7780, 7781, and 27900 to the IP address of the server. You can
also use a port forwarding range of 7777 to 27900. If you want to use the UT Server Admin, forward another port
(8080 usually works well but is used for remote admin—you may have to disable this). Then in the
[UWeb.WebServer] section of the server.ini file, set the ListenPort to 8080 (to match the mapped port above) and
ServerName to the IP assigned to the Router from your ISP.
Can multiple gamers on the LAN get on one game server and play simultaneously with just one public IP
address?
It depends on which network game or what kind of game server you are using.
For example, Unreal Tournament
supports multi-login with one public IP.
How do I get
Half-Life: Team Fortress
to work with the Router?
The default client port for Half-Life is 27005. The computers on your LAN need to have “+clientport 2700x” added
to the HL shortcut command line; the x would be 6, 7, 8, and on up. This lets multiple computers connect to the
same server. One problem: Version 1.0.1.6 won’t let multiple computers with the same CD key connect at the
same time, even if on the same LAN (not a problem with 1.0.1.3).
As far as hosting games, the HL server does not
need to be in the DMZ. Just forward port 27015 to the local IP address of the server computer.
How can I block corrupted FTP downloads?
If you are experiencing corrupted files when you download a file with your FTP client, try using another FTP
program.
The web page hangs; downloads are corrupt, or nothing but junk characters are being displayed on the
screen. What do I need to do?
Force your Ethernet adapter to 10Mbps or half duplex mode, and turn off the “Auto-negotiate” feature of your
Ethernet adapter as a temporary measure. (Please look at the Network Control Panel in your Ethernet adapter’s
Advanced Properties tab.) Make sure that your proxy setting is disabled in the browser. Check our website at
www.linksys.com
for more information.
If all else fails in the installation, what can I do?
Reset the Router by holding down the Reset button for ten seconds. Reset your cable or DSL modem by powering
the unit off and then on. Obtain and flash the latest firmware release that is readily available on the Linksys
website,
www.linksys.com
.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.7 / 5 based on 3 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top