Page 21 / 109
Scroll up to view Page 16 - 20
11
3.4.1
Checking for Proxy Service
If the browser software on the computer is configured to use a
proxy server for Internet access, it is necessary to first disable the
proxy connection.
In Windows Internet Explorer, you can check whether a proxy
server is enabled using the following procedures:
1)
In
the
Explorer
Window,
select
and
click
on
Tools
Æ
Internet Options
, and enter the
Internet Options
window.
2)
In the
Internet Options
window, click the
Connections
tab and click on the
LAN Settings
button.
3)
Verify that the “Use proxy server” option is NOT checked. If
it is checked, click in the checked box to deselect the
option and click
OK
.
3.4.2
Applying the LAN IP Address of MT800
To access the Web-based configuration manager, launch your
Web browser and enter the LAN IP address of the MT800. For the
first access, the default LAN IP address of the MT800 is used. Type
in “
http://
” followed by the default IP address, “
192.168.1.1
” in the
address
bar of the browser. The URL in the address bar should read:
3.4.3
Inputting the User Name and Password
A new window appears prompting you for a user name and
password needed to access the Web-based configuration manager.
Page 22 / 109
12
Figure 3-2
Enter user name and password
Use the default user name:
admin
and password:
admin
for
first time setup. You can change the password once you have
opened the Web-based configuration manager. The user name and
password allows any computer on the same subnet as the MT800 to
access the Web-based configuration manger. And this password can
also be used to Telnet to the device through the Ethernet or Internet
interfaces. To change this password, see Chapter 4
Web-based
Management.
±
Note:
Do not confuse the user name and password used to access the Web-based
manager with the ADSL account and password needed for PPP connections to
access your ISP’s network.
Page 23 / 109
13
Chapter 4
Web-based Management
This chapter describes how to use the web-based management
software to configure the MT800, which introduces the signification
of parameters and method of setting in the configuration interface.
The order of sectors is listed according to the functional configuration
interfaces.
4.1
Manager Interface Layout
The MT800 initially presents the
System View
page shown
below when you first log in.
z
The left part of the page is wizard column, and you can
enter the web page of configuration or management
through the hyperlink in wizard column.
z
The right part of the page is the practical domain of
configuration and management.
Page 24 / 109
14
Figure 4-1
GUI of web-based configuration manager
Page 25 / 109
15
4.2
System View (Home Page)
Figure 4-2
Home Page – system view display
19216811.live