Page 11 / 109 Scroll up to view Page 6 - 10
1
Chapter 1
MT800 Overview
In this chapter you will learn about the appearance and features
of MT800.
1.1
Appearance
MT800 provides the small and private network with simple,
secure, and cost-efficient ADSL Internet connection. It enables many
interactive multi-media applications.
MT800 has considered the household arrangements, enabling
horizontal and vertical positions as well as hanging on the wall.
Figure 1-1
Appearance of MT800
1.2
Parts of MT800
1.2.1
Front Panel
Place the MT800 in a location where the LED indicators can be
easily viewed.
The LEDs on the front panel of MT800 are shown as below:
Page 12 / 109
2
Figure 1-2
Front panel display with LED Indicators
The meaning of LEDs are listed as follows:
LED
Indicator
Status
Description
Power
Steady green light
The unit is powered on.
ADSL LINK
Steady green light
A valid ADSL connection.
ADSL ACT
Blinking green light
There is traffic over ADSL line.
Steady light
A valid LAN connection.
Green light
The speed of data transfer is 10Mbps.
LAN LINK
Orange light
The speed of data transfer is 100Mbps.
LAN ACT
Blinking green light
There is traffic over Ethernet.
1.2.2
Rear Panel
All cable connections to the MT800 are made at the rear panel.
Rear panel of MT800 is shown as below.
Page 13 / 109
3
Figure 1-3
Rear panel cable and power connections
z
ADSL:
ADSL port, connecting to the splitter.
z
Ethernet:
Ethernet port, connecting to PC or hub.
z
Reset:
Press this button for 3 seconds to restore the
default setting. This operation will let you lose your custom
setting. Please be careful when using Reset button.
z
Power:
Power switch.
z
9V AC 1A:
Power input plug.
±
Note:
There might be different power adapter used in different regions. Please make sure
that your power adapter is in conformity with the sign in the rear panel (9V AC 1A or
9V DC 1A).
1.2.3
External Splitter
Using splitter can reduce disturbance signals in the telephone
line. MT800 has to use an external splitter, which has three ports:
LINE, PHONE and MODEM port.
z
LINE:
Connecting to the telephone jack.
z
PHONE:
Connecting to the telephone.
Page 14 / 109
4
z
MODEM:
Connecting to ADSL modem with RJ-11
telephone line.
1.3
MT800 Features
z
Data rates up to 8 Mbps for downstream and 896 kbps for
upstream.
z
Friendly
Web-based
graphical
user
interface
for
configuration and management.
z
Supporting up to eight simultaneous virtual connections.
z
Various LED indicators facilitating the troubleshooting and
maintenance of the device.
z
Widest range of DSLAM interoperability.
z
Built-in firewall and filter rule for users’ information security
protection.
z
Upgradeable firmware through TFTP.
z
Easy to install and use.
Page 15 / 109
5
Chapter 2
Hardware Installation
In this chapter you will learn about the various connections you
need to make in order to use the MT800.
1)
Preparations
2)
Connecting MT800
3)
Power on MT800
2.1
Preparations
2.1.1
Checking Computer Configuration
Item
Requirement
OS
Web browser, such as IE, is installed.
Web browser type
Microsoft Internet Explorer
®
5.0 or Netscape Navigator
®
4.7
or above
Web browser
settings
Enable JavaScript
Ethernet port
NIC adapter
Enable TCP/IP
2.1.2
Collecting ISP Information
z
VPI, VCI
z
Encapsulation type
z
Protocol type
z
Modulation type

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top