1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG8247H
    5. /
  5. 69
Page 341 / 358 Scroll up to view Page 336 - 340
Table 5-14
Parameters used for configuring a VoIP interface based on the SIP protocol
Parameter
Description
Primary Server
Proxy Server Address
Indicates the IP address (provided by the ISP) of the primary
SIP proxy server.
Proxy Server Port
Indicates the ID (provided by the ISP) of the port used for
communication between the primary SIP proxy server and
the VoIP terminal. The ID ranges from 1 to 65535 and the
default ID is 5060.
Secondary Server
Proxy Server Address
Indicates the IP address (provided by the ISP) of the
secondary SIP proxy server.
Proxy Server Port
Indicates the ID (provided by the ISP) of the port used for
communication between the secondary SIP proxy server and
the VoIP terminal. The ID ranges from 1 to 65535 and the
default ID is 5060.
General
Home Domain
Indicates the domain of the registration server of the VoIP
terminal in network communications, such as
softx3000.huawei.com.
Local Port
Indicates the ID of the local port on the ONT. The ID ranges
from 1 to 65535 and the default ID is 5060.
Digitmap
Indicates the voice digitmap.
Digitmap Match Mode
Indicates the digitmap matching mode, including Min and
Max.
l
Min: If the dialed character string matches a digitmap
scheme, the system immediately reports the number to
the call proxy.
l
Max: If the dialed character string matches a digitmap
scheme, the system does not immediately report the
number to the call proxy but starts the short timer. If a
user does not continue dialing digits, the system reports
the number to the call proxy after the short timer times
out; if the user continues dialing digits and the number
matches the long digitmap, the system reports the number
that matches the digitmap to the call proxy.
Registration Period
Indicates the valid registration period. When this period
expires, the SIP user needs to register again. The value range
is 1s to 65534s, and the default value is 600s.
Signaling Port
Indicates the signaling WAN port used for connecting the
VoIP terminal to the SIP server.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5 Web Page Reference
Issue 04 (2011-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-33
Page 342 / 358
Parameter
Description
Media Port
Indicates the WAN port of the voice media streams. When
the name of the media port is empty, it indicates that the name
of the media port is the same as that of the signaling port.
Region
Indicates the country code.
Advance Interface Parameters
Fax Transmode
Indicates the fax mode, including pass-through and T.38.
l
Pass-through: The MG encodes the fax signals
transmitted by a fax machine according to the voice codec
(G.711), and then coverts such signals into the RTP data
packets for real-time transmission over an IP network.
l
T.38: The MG, through ITU-T T.38, converts the T.30-
compliant fax signals transmitted by a fax machine into
the T.38 packets for transmission over an IP bearer
network.
Fax Switchmode
Indicates the fax switching mode, including negotiation and
self-switch. The fax switching mode is selected according to
the customer requirements.
Profile Body
Indicates the control point parameters. Such parameters are
selected according to the softswitch. Generally, the default
settings are adopted.
Software Parameters
Indicates the software parameters. Such parameters are
selected according to the softswitch. Generally, the default
settings are adopted.
Enable Echo
Cancellation
Enables or disables echo cancellation. By default, echo
cancellation is enabled.
l
VoIP Interface Configuration - H.248 Protocol
1.
In the navigation tree on the left, choose
Voice
>
VoIP Interface Configuration
. In
the pane on the right, parameters of a VoIP interface can be configured, including the
primary MGC server, secondary MGC server, and digitmap, as shown in
Figure
5-31
.
5 Web Page Reference
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5-34
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
Page 343 / 358
Figure 5-31
VoIP Interface Configuration - H.248 protocol
2.
Click
Apply
to apply the configuration.
Table 5-15
describes parameters used for configuring a VoIP interface based on the H.248
protocol.
Table 5-15
Parameters used for configuring a VoIP interface based on the H.248 protocol
Parameter
Description
Primary Server
MGC Address
Indicates the IP address (provided by the ISP) of the primary
MGC server.
MGC Port
Indicates the ID (provided by the ISP) of the port used for
communication between the primary MGC server and the
VoIP terminal. The ID ranges from 1 to 65535 and the default
ID is 2944.
Secondary Server
MGC Address
Indicates the IP address (provided by the ISP) of the
secondary MGC server.
MGC Port
Indicates the ID (provided by the ISP) of the port used for
communication between the secondary MGC server and the
VoIP terminal. The ID ranges from 1 to 65535 and the default
ID is 2944.
General
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5 Web Page Reference
Issue 04 (2011-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-35
Page 344 / 358
Parameter
Description
MG Domain
Fill the domain name when
Register Format
is set to
DomainName
, such as user.huawei.com.
MG Port
Indicates the ID of the local port on the ONT. The ID ranges
from 1 to 65535 and the default ID is 2944.
Device Name
Fill the device name when
Register Format
is set to
DeviceName
.
MID Format
Indicates the MG registration format. It can be the MG
domain name, IP address, or device name. The MG register
format must be the same as the register format provided by
the ISP.
Digitmap Match Mode
Indicates the digitmap matching mode, including Min and
Max.
l
Min: If the dialed character string matches a digitmap
scheme, the system immediately reports the number to
the softswitches.
l
Max: If the dialed character string matches a digitmap
scheme, the system does not immediately report the
number to the softswitches but starts the short timer. If a
user does not continue dialing digits, the system reports
the number to the softswitches after the short timer times
out; if the user continues dialing digits and the number
matches the long digitmap, the system reports the number
that matches the digitmap to the softswitches.
RTP TID Prefix
Indicates the prefix of the ephemeral termination. The default
prefix on Huawei softswitches is A100.
Start Number of RTP
TID
Indicates the start number of the suffix of the ephemeral
termination. The default value is 0.
Width of RTP TID
Number
Indicates the length of the suffix of the ephemeral
termination. The default value is 6.
Signaling Port
Indicates the signaling WAN port used for connecting the
VoIP terminal to the MGC server.
Media Port
Indicates the WAN port of the voice media streams. When
the name of the media port is empty, it indicates that the name
of the media port is the same as that of the signaling port.
Region
Indicates the country code.
Advanced Interface configuration
5 Web Page Reference
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5-36
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
Page 345 / 358
Parameter
Description
Fax Transmode
Indicates the fax mode, including pass-through and T.38.
l
Pass-through: The MG encodes the fax signals
transmitted by a fax machine according to the voice codec
(G.711), and then coverts such signals into the RTP data
packets for real-time transmission over an IP network.
l
T.38: The MG, through ITU-T T.38, converts the T.30-
compliant fax signals transmitted by a fax machine into
the T.38 packets for transmission over an IP bearer
network.
Fax Switchmode
Indicates the fax switching mode, including negotiation and
self-switch. The fax switching mode is selected according to
the customer requirements.
Profile Index
Indicates the control point parameters. Such parameters are
selected according to the softswitch. Generally, the default
settings are adopted.
Software Parameters
Indicates the software parameters. Such parameters are
selected according to the softswitch. Generally, the default
settings are adopted.
Start Negotiate Version
Indicates the start version of the H.248 protocol for
negotiation. It is selected according to the softswitch. The
value range is 0 to 3, and the default value is 2.
l
0: Indicates that the negotiation is based on the profile
parameters.
l
1-3: Indicates the start version of the H.248 protocol for
negotiation.
Enable Echo
Cancellation
Enables or disables echo cancellation. By default, echo
cancellation is enabled.
5.9.2 VoIP User Configuration
l
VoIP User Configuration - SIP protocol
1.
In the navigation tree on the left, choose
Voice
>
VoIP User Configuration
. In the
pane on the right, you can configure parameters of a VoIP user, including the register
user name, authentication user name, password, and associated POTS, as shown in
Figure 5-32
.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5 Web Page Reference
Issue 04 (2011-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-37

Rate

4.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top