1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG8247H
    5. /
  5. 68
Page 336 / 358 Scroll up to view Page 331 - 335
Parameter
Description
Mapping Name
Indicates the name of the port mapping rule.
Enable PortMapping
Indicates whether to enable port mapping.
5.7.3 PortTrigger Configuration
1.
In the navigation tree on the left, choose
Forward Rules
>
PortTrigger Configuration
.
In the pane on the right, click
New
. In the dialog box that is displayed, set the parameters
related to the port trigger, as shown in
Figure 5-25
.
Figure 5-25
PortTrigger Configuration
2.
Click
Apply
to apply the configuration.
The port trigger indicates that a specific Extranet port is automatically enabled when a
corresponding Intranet port sends a packet and the packet is mapped to the Intranet port on the
host.A specific mapping packet is sent from the ONT through the Intranet so that specific packets
of the Extranet can be mapped to the corresponding host. A specified port on the gateway firewall
is open to some applications for remote access. The port trigger can dynamically enable the open
port of the firewall.
Table 5-12
describes the parameters related to the port trigger.
Table 5-12
Parameters related to the port trigger
Parameter
Description
Interface
Indicates the name of the WAN interface where the port trigger
is enabled.
Trigger Protocol
Indicates the protocol type of the port trigger packet, which may
be TCP, UDP, or TCP/UDP.
Open Protocol
Indicates the protocol type of the open data packet.
5 Web Page Reference
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5-28
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
Page 337 / 358
Parameter
Description
Trigger Start Port
Indicates the destination start port of the port trigger packet.
Trigger End Port
Indicates the destination end port of the port trigger packet.
Open Start Port
Indicates the destination start port of the open packet.
Open End Port
Indicates the destination end port of the open packet.
Enable
Indicates whether to enable the port trigger.
5.8 Network Applications
This topic describes how to configure the USB, ALG, UPnP, and ARP through the Web page.
5.8.1 USB
5.8.2 ALG Configuration
5.8.3 UPnP Configuration
5.8.4 ARP Configuration
5.8.1 USB
1.
In the navigation tree on the left, choose
Network Applications
>
USB
. In the pane on the
right, set the parameters related to FTP downloading to share the FTP file of the ONT, as
shown in
Figure 5-26
.
Figure 5-26
USB
2.
Click
Download
to download files from the FTP server to the USB storage device.
Table 5-13
describes the parameters related to the USB.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5 Web Page Reference
Issue 04 (2011-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-29
Page 338 / 358
Table 5-13
Parameters related to the USB
Parameter
Description
Download URL
Indicates the path of the file downloaded through FTP.
Port Number
Indicates the FTP port number. It is set to 21 by default.
Generally, the setting is not required.
User Name
Indicates the user name for connecting to the FTP server. If the
FTP server supports anonymous login, the setting is not required.
Password
Indicates the password for connecting to the FTP server. If the
FTP server supports anonymous login, the setting is not required.
Device
Indicates the drive of the external USB device for saving the file
downloaded through FTP. When the USB storage device is
connected to the USB port, the drop-down list is available.
Local Path
Indicates the path for saving the FTP-downloaded file to the
external USB device. If the path is not entered, the path specified
in Download URL is used by default.
5.8.2 ALG Configuration
1.
In the navigation tree on the left, choose
Network Applications
>
ALG Configuration
.
In the pane on the right, determine whether to enable the FTP or TFTP, as shown in
Figure
5-27
.
Figure 5-27
ALG Configuration
2.
Click
Apply
to apply the configuration.
When the NAT function is enabled, the application level gateway (ALG) function needs to be
enabled to ensure that some application software and hardware can be normally used.
5.8.3 UPnP Configuration
1.
In the navigation tree on the left, choose
Network Applications
>
UPnP Configuration
.
In the pane on the right, determine whether to enable the UPnP, as shown in
Figure 5-28
.
5 Web Page Reference
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5-30
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
Page 339 / 358
Figure 5-28
UPnP Configuration
2.
Click
Apply
to apply the configuration.
Universal Plug and Play (UPnP) is the name of a group of protocols. The UPnP supports zero
configuration networking and automatic discovery of different network devices. If the UPnP is
enabled, the UPnP-enabled device can be dynamically connected to the network to obtain the
IP address, obtain the transfer performance, discover other devices, and learn the performance
of the other devices. The UPnP-enabled device can be automatically disconnected from the
network, without affecting the device or other devices.
When the UPnP is enabled, the LAN-side PC automatically finds the ONT, which is considered
as a peripheral device of the PC and is plug-and-play. After running application software on the
PC, port mapping entries are automatically generated on the ONT through the UPnP protocol,
thus improving the running speed.
5.8.4 ARP Configuration
1.
In the navigation tree on the left, choose
Network Applications
>
ARP Configuration
.
In the pane on the right, click
New
. In the dialog box that is displayed, set the resolution
rule between a MAC address and an IP address, as shown in
Figure 5-29
.
Figure 5-29
ARP Configuration
2.
Click
Apply
to apply the configuration.
Static ARP means to manually add an ARP entry on an ONT. A static ARP never ages and can
only be deleted manually. If the mapping between the IP address and MAC address of the peer
device is available, configuring a static ARP entry benefits a lot. For example, the dynamic ARP
entry learning is omitted during device communication and the static ARP entry prevents a
device from learning an incorrect ARP entry in the case of malicious attacks.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5 Web Page Reference
Issue 04 (2011-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-31
Page 340 / 358
5.9 Voice
This topic describes how to configure the voice service through the Web page.
NOTE
The Web page for configuring the voice service varies with the loaded voice protocols. The following
topics describe the Web pages after the H.248 protocol and the SIP protocol are loaded.
l
Device software version V100R002C00 supports the SIP protocol.
l
Device software version V100R002C01 supports the H.248 protocol.
5.9.1 VoIP Interface Configuration
5.9.2 VoIP User Configuration
5.9.1 VoIP Interface Configuration
l
Configuring VoIP Interface - SIP Protocol
1.
In the navigation tree on the left, choose
Voice
>
VoIP Interface Configuration
. In
the pane on the right, parameters of a VoIP interface can be configured, including the
IP addresses of the primary server and secondary server, and digitmap, as shown in
Figure 5-30
.
Figure 5-30
VoIP Interface Configuration - SIP protocol
2.
Click
Apply
to apply the configuration.
Table 5-14
describes the parameters used for configuring a VoIP interface based on the
SIP protocol.
5 Web Page Reference
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
5-32
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)

Rate

4.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top