Huawei HG8247H Router Manual PDF (Setup & Configuration Guide)

Page 306 / 358 Scroll up to view Page 301 - 305

In GPON mode, run the

display statistics ont-eth

command to query the performance

statistics of an ETH port.

l

Delete the performance statistics of an ETH port.

In GPON mode, run the

clear statistics ont-eth

command to delete the performance

statistics of an ETH port.

----End

Example

To query the performance statistics of ETH port 1 on ONT 1 that is connected to GPON port

0/2/0, do as follows:

huawei(config-if-gpon-0/2)#

display statistics ont-eth 0 1 ont-port 1

-----------------------------------------------------------------------

Received frames

:

98 100%

Received unicast frames

:

0

0%

Received multicast frames

:

0

0%

Received broadcast frames

:

98 100%

Received 64-byte frames

:

0

0%

Received 65~127-byte frames

:

87

89%

Received 128~255-byte frames

:

6

6%

Received 256~511-byte frames

:

5

5%

Received 512~1023-byte frames

:

0

0%

Received 1024~1518-byte frames

:

0

0%

Received undersize frames

:

0

0%

Received oversize frames

:

0

0%

Received fragments

:

0

Received jabbers

:

0

Received FCS error frames

:

0

Discard frames

:

0

Received alignment error frames

:

0

MAC sub-layer received error frames :

0

PPPOE filtered frames

:

0

Buffer overflows on receive

:

0

Received PAUSE frames

:

0

Received right bytes

:

11119

Received bad bytes

:

0

Sent frames

:

0 100%

Sent unicast frames

:

0

0%

Sent multicast frames

:

0

0%

Sent broadcast frames

:

0

0%

Sent delay frames

:

0

Sent MTU exceeded discard frames

:

0

Carrier sense error frames

:

0

SQE test error messages

:

0

Sent single collision frames

:

0

Sent multiple collision frames

:

0

Sent excessive collision frames

:

0

Late collision frames

:

0

MAC sub-layer sent error frames

:

0

Buffer overflows on transmit

:

0

Sent PAUSE frames

:

0

Sent right bytes

:

0

Sent bad bytes

:

0

Up traffic (kbps)

:

0

Down traffic (kbps)

:

0

-----------------------------------------------------------------------

To delete the performance statistics of ETH port 1 on ONT 1 that is connected to GPON port

0/2/0, do as follows:

4 Maintenance and Troubleshooting

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-28

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 307 / 358

huawei(config-if-gpon-0/2)#

clear statistics ont-eth 0 1 ont-port 1

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

4-29

Page 308 / 358

Page 309 / 358

5

Web Page Reference

About This Chapter

This topic describes the usage and meanings of the parameters on the Web Page.

Before configuring and viewing the parameters on the Web page, log in to the Web page. For

details about how to log in to the Web page, see

Locally Logging in to the Web Interface

.

The Web page configurations of the HG8240/HG8245/HG8247 and the HG8240 are similar but

the HG8240's Web page does not contain the

Wi-Fi

node.

Because different software versions support different voice protocols, the

Voice

node contains

different parameters. The V100R002C00 supports the SIP protocol and the V100R002C01

supports the H.248 protocol.

The configuration window for an administrator is different from that for a common user.

l

Compared with a common user, an administrator has permissions to view and configure

all parameters on the Web page except the

Modify Login Password

under the

System

Tools

.

l

A common user does not have permissions to view the following parameters:

–

LAN Port Work Mode

under the

LAN

node

–

ONT Access Control Configuration

under the

Security

node

–

The

Voice

node

–

Time Setting

and

TR-069

under the

System Tools

node

–

Download Configuration File

and

Upload Configuration File

on the

Configuration

File

window under the

System Tools

node

l

A common user does not have permissions to configure the

WAN Configuration

parameter under the

WAN

node.

5.1 Status

This topic describes how to query the information about the WAN interface, VoIP interface, and

Wi-Fi port through the Web page.

5.2 WAN

This topic describes how to configure the WAN interface through the Web page.

5.3 LAN

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

5 Web Page Reference

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

5-1

Page 310 / 358

This topic describes how to set the working mode of the LAN port, the LAN host, and the DHCP

server through the Web page.

5.4 Wi-Fi

This topic describes how to perform basic and advanced configurations of the Wi-Fi through

the Web page.

5.5 Security

This topic describes how to configure the IP address filter, MAC address filter, DoS, and ONT

access control through the Web page.

5.6 Route

This topic describes how to configure the default route and static route through the Web page.

5.7 Forward Rules

This topic describes how to configure the DMZ, port mapping, and port trigger through the Web

page.

5.8 Network Applications

This topic describes how to configure the USB, ALG, UPnP, and ARP through the Web page.

5.9 Voice

This topic describes how to configure the voice service through the Web page.

5.10 System Tools

This topic describes how to use the system tools on the Web page, including using the tools to

restart the device, restore the default configuration, and conduct the test.

5 Web Page Reference

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

5-2

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share