Huawei HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 306 / 364 Scroll up to view Page 301 - 305

4.5.9 VoIP Loop-Line Test

A VoIP loop-line test is used for locating a fault that occurs on wires A and B. It includes the

voltage test, resistance test, and current test.

Prerequisite

l

The user is a user with the operator authority or higher.

l

The OLT and the NMS communicate with each other properly.

l

The NMS is able to discover an online ONT and VoIP service parameters are configured.

Precautions

If a loop-line test is required in communication,

No Test

must be set to

Force

.

Procedure

Step 1

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-click the target

OLT, or select the target OLT, right-click, and choose

NE Explorer

.

Step 2

In the navigation tree, choose

GPON

>

GPON Management

.

Step 3

In the window on the right, choose

GPON ONU

.

Step 4

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU records.

Step 5

Select a required record from the ONT list, and then click the

The Ont's UNI Port Info

tab in

the lower pane.

Step 6

Select a record from the list whose

UNI Type

is

Pots

, right-click, and choose

Outer Line

Test

from the shortcut menu.

Step 7

In the dialog box that is displayed, set

Busy Processing

to

No Test

or

Force

, as shown in the

following figure.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

298

Page 307 / 364

Figure 4-16

VoIP loop-line test

Step 8

Click

Start

. After the test is complete, test results will be displayed on the NMS.

----End

4.6 Maintenance and Troubleshooting on the OLT CLI

This topic describes how to maintain and troubleshoot the ONT on the OLT CLI.

4.6.1 Querying and Deleting Performance Statistics of an ETH Port

This topic describes how to query or delete the performance statistics of an ETH port by sending

OMCI messages to the ONT from the OLT.

Context

Before querying accurate performance statistics, delete the performance statistics of the Ethernet

port first.

Procedure

l

Query the performance statistics of an ETH port.

In GPON mode, run the

display statistics ont-eth

command to query the performance

statistics of an ETH port.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

299

Page 308 / 364

l

Delete the performance statistics of an ETH port.

In GPON mode, run the

clear statistics ont-eth

command to delete the performance

statistics of an ETH port.

----End

Example

To query the performance statistics of ETH port 1 on ONT 1 that is connected to GPON port

0/2/0, do as follows:

huawei(config-if-gpon-0/2)#

display statistics ont-eth 0 1 ont-port 1

-----------------------------------------------------------------------

Received frames

:

98 100%

Received unicast frames

:

0

0%

Received multicast frames

:

0

0%

Received broadcast frames

:

98 100%

Received 64-byte frames

:

0

0%

Received 65~127-byte frames

:

87

89%

Received 128~255-byte frames

:

6

6%

Received 256~511-byte frames

:

5

5%

Received 512~1023-byte frames

:

0

0%

Received 1024~1518-byte frames

:

0

0%

Received undersize frames

:

0

0%

Received oversize frames

:

0

0%

Received fragments

:

0

Received jabbers

:

0

Received FCS error frames

:

0

Discard frames

:

0

Received alignment error frames

:

0

MAC sub-layer received error frames :

0

PPPOE filtered frames

:

0

Buffer overflows on receive

:

0

Received PAUSE frames

:

0

Received right bytes

:

11119

Received bad bytes

:

0

Sent frames

:

0 100%

Sent unicast frames

:

0

0%

Sent multicast frames

:

0

0%

Sent broadcast frames

:

0

0%

Sent delay frames

:

0

Sent MTU exceeded discard frames

:

0

Carrier sense error frames

:

0

SQE test error messages

:

0

Sent single collision frames

:

0

Sent multiple collision frames

:

0

Sent excessive collision frames

:

0

Late collision frames

:

0

MAC sub-layer sent error frames

:

0

Buffer overflows on transmit

:

0

Sent PAUSE frames

:

0

Sent right bytes

:

0

Sent bad bytes

:

0

Up traffic (kbps)

:

0

Down traffic (kbps)

:

0

-----------------------------------------------------------------------

To delete the performance statistics of ETH port 1 on ONT 1 that is connected to GPON port

0/2/0, do as follows:

huawei(config-if-gpon-0/2)#

clear statistics ont-eth 0 1 ont-port 1

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

300

Page 309 / 364

5

Web Page Reference

About This Chapter

This topic describes the usage and meanings of the parameters on the Web Page.

Before configuring and viewing the parameters on the Web page, log in to the Web page. For

details about how to log in to the Web page, see

Locally Logging in to the Web Interface

.

The Web page configurations of the HG8010/HG8110/HG8240/HG8245/HG8247/HG8447 and

the HG8240 are similar but the HG8240's Web page does not contain the

Wi-Fi

node.

Because different software versions support different voice protocols, the

Voice

node contains

different parameters. The V100R002C06 supports the SIP protocol and the V100R002C07

supports the H.248 protocol.

The configuration window for an administrator is different from that for a common user.

l

Compared with a common user, an administrator has permissions to view and configure

all parameters on the Web page except the

Modify Login Password

under the

System

Tools

.

l

A common user does not have permissions to view the following parameters:

–

LAN Port Work Mode

under the

LAN

node

–

ONT Access Control Configuration

under the

Security

node

–

The

Voice

node

–

Time Setting

and

TR-069

under the

System Tools

node

–

Download Configuration File

and

Upload Configuration File

on the

Configuration

File

window under the

System Tools

node

l

A common user does not have permissions to configure the

WAN Configuration

parameter under the

WAN

node.

5.1 Status

This topic describes how to query the information about the WAN interface, VoIP interface, and

Wi-Fi port through the Web page.

5.2 WAN

This topic describes how to configure the WAN interface through the Web page.

5.3 LAN

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

5 Web Page Reference

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

301

Page 310 / 364

This topic describes how to set the working mode of the LAN port, the LAN host, and the DHCP

server through the Web page.

5.4 WLAN

This topic describes how to perform basic and advanced configurations of the WLAN through

the Web page.

5.5 Security

This topic describes how to configure the IP address filter, MAC address filter, DoS, and ONT

access control through the Web page.

5.6 Route

This topic describes how to configure the default route and static route through the Web page.

5.7 Forward Rules

This topic describes how to configure the DMZ, port mapping, and port trigger through the Web

page.

5.8 Network Applications

This topic describes how to configure the USB, ALG, UPnP, and ARP through the Web page.

5.9 Voice

This topic describes how to configure the voice service through the Web page.

5.10 System Tools

This topic describes how to use the system tools on the Web page, including using the tools to

restart the device, restore the default configuration, and conduct the test.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

5 Web Page Reference

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

302

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share