Huawei HG8247 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Huawei

HG8247

Page 211 / 364 Scroll up to view Page 206 - 210

dba-profile add profile-id 30 type4 max 61440

ont-lineprofile gpon profile-id 10

tcont 3 dba-profile-id 30

gem add 3 eth tcont 3

mapping-mode vlan

gem mapping 3 2 vlan 30

commit

quit

ont-srvprofile gpon profile-id 10

ont-port eth 4 pots 2 catv 1

commit

quit

interface gpon 0/1

port 1 ont-auto-find enable

display ont autofind 1

ont confirm 1 ontid 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-

srvprofile-id 10

ont confirm 1 ontid 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-

srvprofile-id 10

ont alarm-profile 1 1 profile-id 1

ont alarm-profile 1 2 profile-id 1

quit

traffic table ip index 10 cir off priority 4 priority-policy tag-In-Package

service-port 5 vlan 1000 gpon 0/1/1 ont 1 gemport 3 multi-service user-vlan 30 rx-

cttr 10

tx-cttr 10

service-port 6 vlan 1000 gpon 0/1/1 ont 2 gemport 3 multi-service user-vlan 30 rx-

cttr 10

tx-cttr 10

queue-scheduler wrr 10 10 20 20 40 0 0 0

cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7

multicast-vlan 1000

igmp mode proxy

igmp version v3

igmp uplink-port 0/19/0

btv

igmp uplink-port-mode default

multicast-vlan 1000

igmp program add name program1 ip 224.1.1.10 sourceip 10.10.10.10

btv

igmp profile add profile-name profile0

igmp profile profile-name profile0 program-name program1 watch

igmp policy service-port 5 normal

igmp policy service-port 6 normal

igmp user add service-port 5 auth

igmp user add service-port 6 auth

igmp user bind-profile service-port 5 profile-name profile0

igmp user bind-profile service-port 6 profile-name profile0

multicast-vlan 1000

igmp multicast-vlan member service-port 5

igmp multicast-vlan member service-port 6

quit

save

3.4 Configuration on the Web Page

This topic describes how to configure Internet access service, VoIP service and Wi-Fi service

on the Web page.

3.4.1 Preparations

Before configuring services on the Web page, plan data of the entire network in a unified manner

and enable Layer 2 service channels between the OLT and ONT.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

203

Page 212 / 364

Enabling Layer 2 Service Channels Between an OLT and a GPON ONT (on the

OLT CLI)

To configure GPON ONT-side services, enable Layer 2 service channels between the OLT and

the GPON ONT.

Prerequisite

You need to enter the OLT CLI to perform the following operations that are based on the OLT

CLI.

Data Plan

Table 3-11

shows the data plan for enabling Layer 2 service channels between the OLT and the

GPON ONT:

Table 3-11

Data plan

Service

Classificat

ion

Item

Data

Remarks

Network

data

FTTH

OLT PON port: 0/1/1

ONT ID: 1-2

Service

VLAN

HSI service

SVLAN: 100

CVLAN: 10

VoIP service

SVLAN: 200

CVLAN: 20

Wi-Fi service

SVLAN: 400

CVLAN: 40

U2560 management

channel

SVLAN: 500

CVLAN: 50

QoS

(Priority)

HSI service

Priority: 1; queue scheduling:

WRR

Generally, the

QoS priorities is

NMS service and

VoIP service >

Internet access

service in a

descending

order.

Generally, the

priority is set on

the ONT, and the

OLT inherits the

priority set on the

ONT.

VoIP service

Priority: 6; queue scheduling:

Wi-Fi service

Priority: 1; queue scheduling:

WRR

U2560 management

channel

Priority: 7; queue scheduling:

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

204

Page 213 / 364

Service

Classificat

ion

Item

Data

Remarks

QoS (DBA)

HSI service

Profile type: Type4

Maximum bandwidth: 100

Mbit/s

T-CONT ID: 1

DBA is used to

control the

upstream

bandwidth of the

ONT. DBA

profiles are

bound to

TCONTs.

Different

TCONTs are

planned for

different

bandwidth

assurance types.

Generally, the

service with a

high priority

adopts a fixed

bandwidth or an

assured

bandwidth, and

the service with a

low priority

adopts the

maximum

bandwidth or

best effort.

VoIP service

Profile type: Type3

Assured bandwidth: 15

Mbit/s

Maximum bandwidth: 30

Mbit/s

T-CONT ID: 2

Wi-Fi service

Profile type: Type4

Maximum bandwidth: 200

Mbit/s

T-CONT ID: 3

U2560 management

channel

Profile type: Type2

Assured bandwidth: 15

Mbit/s

T-CONT ID: 4

QoS (CAR)

HSI service

Upstream and downstream

bandwidth: 4 Mbit/s

Traffic control

can be

implemented on

the BRAS, or on

the OLT or ONT

by using port rate

limitation or

using a traffic

profile to limit

the upstream and

downstream

traffic.

Generally, in the

case of FTTH,

limit the rate on

the OLT; in the

case of FTTB/

FTTC, limit the

rate on the ONT.

VoIP service

No rate limitation in the

upstream and downstream

directions

Wi-Fi service

Upstream and downstream

bandwidth: 6 Mbit/s

U2560 management

channel

No rate limitation in the

upstream and downstream

directions

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

205

Page 214 / 364

Flow Chart

Table 3-11

shows the flow chart for enabling Layer 2 service channels between the OLT and

the GPON ONT:

Figure 3-7

Flow chart

Procedure

Step 1

Create SVLANs and add an upstream port to them.

The VLAN type is Smart and the VLAN IDs are 100, 200, 400 and 500, VLAN 100 is for HSI

service; VLAN 200 is for VoIP service; VLAN 400 is for Wi-Fi service and VLAN 500 is for

the U2560 management channel. The VLAN for the Internet access service is a stacking VLAN.

Add the upstream port 0/19/0 to the VLAN.

huawei(config)#

vlan 100,200,400,500 smart

huawei(config)#

vlan attrib 100 stacking

huawei(config)#

port vlan 100,200,400,500 0/19 0

Step 2

Enables ARP proxy.

For different users of the same SVLAN, because the service ports of the smart VLAN are isolated

from each other, the voice media streams cannot interchange normally. Therefore, the ARP

proxy function of the OLT needs to be enabled.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

206

Page 215 / 364

huawei(config)#

arp proxy enable

huawei(config)#

interface vlanif 200

huawei(config-if-vlanif200)#

arp proxy enable

huawei(config-if-vlanif200)#

quit

Step 3

Configure GPON ONT profiles.

GPON ONT profiles include the DBA profile, line profile, service profile, and alarm profile.

DBA profile: A DBA profile describes the GPON traffic parameters. A T-CONT is bound

to a DBA profile for dynamic bandwidth allocation, improving the upstream bandwidth usage

rate.

Line profile: A line profile describes the binding between the T-CONT and the DBA profile,

the QoS mode of the traffic stream, and the mapping between the GEM port and the ONT-

side service.

Service profile: A service profile provides the service configuration channel for the ONT

that is managed through OMCI.

Alarm profile: An alarm profile contains a series of alarm thresholds to measure and monitor

the performance of activated ONT lines. When a statistical value reaches the threshold, the

host is notified and an alarm is reported to the log host and the NMS.

Configure a DBA profile.

Run the

display dba-profile

command to query the existing DBA profiles in the system.

If the existing DBA profiles in the system do not meet the requirement, run the

dba-profile

add

command to create a DBA profile.

HSI service: Set the DBA profile ID to 10, type to type4, and maximum bandwidth to

100 Mbit/s.

VoIP service: Set the DBA profile ID to 20, type to Type3, assured bandwidth to 15

Mbit/s, and maximum bandwidth to 30 Mbit/s.

Wi-Fi service: Set the DBA profile ID to 30, type to type4, and maximum bandwidth

to 200 Mbit/s.

U2560 management channel: Set the DBA profile ID to 40, type to Type2, assured

bandwidth to 15 Mbit/s.

huawei(config)#

dba-profile add profile-id 10 type4 max 102400

huawei(config)#

dba-profile add profile-id 20 type3 assure 30720 max 102400

huawei(config)#

dba-profile add profile-id 30 type4 max 204800

huawei(config)#

dba-profile add profile-id 40 type2 assure 30720

Configure an ONT line profile.

Create GPON ONT line profile 10.

HSI service: Bind the T-CONT which ID is 1 to DBA profile 10.

VoIP service: Bind the T-CONT which ID is 2 to DBA profile 20.

Wi-Fi service: Bind the T-CONT which ID is 3 to DBA profile 30.

U2560 management channel: Bind the T-CONT which ID is 4 to DBA profile 40.

huawei(config)#

ont-lineprofile gpon profile-id 10

huawei(config-gpon-lineprofile-10)#

tcont 1 dba-profile-id 10

huawei(config-gpon-lineprofile-10)#

tcont 2 dba-profile-id 20

huawei(config-gpon-lineprofile-10)#

tcont 3 dba-profile-id 30

huawei(config-gpon-lineprofile-10)#

tcont 4 dba-profile-id 40

Add GEM ports which are used to carry service streams of the ETH type and bind the GEM

ports to T-CONTs. Set the QoS mode to priority-queue (default).

HSI service: Add a GEM port which ID is 1 and bind the GEM port to T-CONT 1.

VoIP service: Add a GEM port which ID is 2 and bind the GEM port to T-CONT 2.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

207

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share