Huawei HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 206 / 364 Scroll up to view Page 201 - 205

a.

In the navigation tree, choose

LAN

>

DHCP Server Configuration

.

b.

In the right pane, click the check box of

Enable DHCP L2Relay

.

NOTE

If

Bridge Type

of the WAN port is set to

PPPoE_Bridged

, DHCP relay does not need to be

enabled. If

Bridge Type

is set to

IP_Bridged

, DHCP relay must be enabled.

c.

Click

Apply

to apply the configuration.

5.

Save the configuration.

In the navigation tree, choose

System Tools

>

Configuration File

. In the right pane,

click

Save Configuration

to save the configuration.

l

Configure the ONT on the U2000.

Layer 3 bridge mode is used for connecting the ONT to the upper-layer device and

parameters of a WAN port must be configured.

The following uses batch configurations of creating a value-added service profile of the

ONT as an example. To configure an ONT, on the GPON ONU tab page, select an ONT,

right-click, and choose

Configure Value-Added Service

from the shortcut menu.

1.

Log in to the NMS (iManager U2000 V100R003C00) and start the FTP service.

2.

Configure the value-added service profile of the ONT.

a.

From the main menu, choose

Configuration

>

Access Profile Management

. In

the navigation tree of the tab page that is displayed, choose

PON Profile

>

ONT

VAS Profile

.

b.

On the

ONT VAS Profile

tab page, right-click, and choose

Add

from the shortcut

menu.

c.

In the dialog box that is displayed, set relevant parameters.

–

Profile Name: ONT-IPTV

–

Vendor ID: HWTC(2011)

–

Terminal Type: 247

–

Version: V1R002C06-Later

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

198

Page 207 / 364

d.

Configure the working mode of a LAN port.

a.

In the navigation tree, choose

LANDevice

>

LAN Interface 1

>

LAN

Interface

.

b.

Select

LAN Interface

, right-click, and choose

Add

. Add

LAN Ethernet

Configuration 2

and

LAN Ethernet Configuration 3

.

c.

Select

LAN Ethernet Configuration 3

and set

LAN Port two three-port

enable

to

enable

. This indicates that LAN 3 works in Layer 3 mode.

NOTE

l

If

LAN Port two three-port enable

is

disable

, the LAN port works in the Layer 2

mode.

l

If

LAN Port two three-port enable

is

enable

, the LAN port works in the Layer 3

mode.

LAN Port two three-port enable

is defaulted to

disable

.

By default, the system has one

LAN Ethernet Configuration 1

node. To add multiple

nodes, select

LAN Interface

, right-click, and choose

Add

from the shortcut menu.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

199

Page 208 / 364

e.

Configure parameters of a WAN port.

a.

In the navigation tree, choose

WAN Device

>

WAN Device 1

>

WAN

Connection

. Select

WAN Connection

, right-click, and choose

Add IP

Connection

from the shortcut menu.

b.

Select

WAN IP Interface 1

and enter (or select) a proper value.

–

WAN Interface Name: ONT-IPTV

–

WAN Enable: enable

–

Connection Type: IP_Bridged

–

VLAN ID: 30 (The VLAN ID of the ONT must be the same as the user-

side VLAN ID configured on the OLT.)

–

Priority: 4

–

MultiCast VLAN ID: 1000 (The multicast VLAN ID of the ONT must

be the same as the multicast VLAN ID configured on the OLT.)

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

200

Page 209 / 364

f.

Configure multicast parameters.

a.

In the navigation tree, choose

Services

>

IGMP

. Select

IGMP

and enter

proper values.

–

WAN Port IGMP Switch: Enable

–

Proxy Switch: Disable

–

Snooping Switch: Enable

NOTE

The ONT multicast modes (IGMP proxy and IGMP snooping) conflict. Only one mode is

supported at a time.

g.

Configure a routing policy.

a.

In the navigation tree, choose

Layer 3 Forwarding

>

Policy Route

. Select

Policy Route

, right-click, and choose

Add

from the shortcut menu.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

201

Page 210 / 364

b.

Select

Policy Route 1

and enter proper values.

–

Physical Port Name: LAN3

–

WAN Interface Name: WAN1(ONT-IPTV)

NOTE

To bind a LAN port to a WAN port, set

Physical Port Name

and

WAN Interface

Name

. The preceding figure shows that WAN 1 is bound to LAN 3.

To bind a WAN port to multiple LAN ports, set

Physical Port Name

to

LAN1,...,LANx

. For example, to bind WAN 1 to LAN 1 and LAN 2, set

Physical Port

Name

to

LAN1,LAN2

.

h.

Click

OK

to complete the configuration of the new profile.

3.

Bind the value-added service profile.

a.

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-

click the target OLT, or select the target OLT, right-click, and choose

NE

Explorer

.

b.

In the navigation tree, choose

GPON

>

GPON Management

.

c.

In the window on the right, choose

GPON ONU

.

d.

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU

records.

e.

Select an ONT from the list, right-click, and choose

Bind VAS Profile

from the

shortcut menu. In the dialog box that is displayed, choose the created profile, and

click

OK

to complete profile binding.

----End

Result

The user can watch program1 on the TV.

Configuration File

vlan 1000 smart

port vlan 1000 0/19 0

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

202

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share