Huawei HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 166 / 364 Scroll up to view Page 161 - 165

c.

Click

Apply

to apply the configuration.

3.

Configure the parameters of the H.248-based voice interface.

a.

In the navigation tree, choose

Voice

>

VoIP Interface Configuration

.

b.

In the right pane, configure the parameters of the H.248-based voice interface as

follows (other parameters use the default settings):

–

Set

MGC Address

below

Primary Server

to

200.200.200.200

.

–

MID Format: DomainName

–

MG Domain: 6877687714852901

–

Signaling Port: 1_VOIP_R_VID_20

–

Region: CN – China

NOTE

l

The parameters of the H.248-based voice interface must be consistent with the

corresponding configuration on the media gateway controller (MGC).

l

If dual-homing is configured,

MGC Address

below

Secondary Server

must be

configured.

l

MID Format

can be set to

Domain Name

,

IP

, or

Device

. If

MID Format

is set to

Domain

Name

or

Device

, the setting must be consistent with the corresponding configuration on

the MGC.

l

Domain Name

is ONT's domain name registered on the MGC. It is globally unique.

Domain Name

in this example is ONT's SN.

l

If

Media Port

is empty, the parameter value is the same as

Signaling Port

. The media

streams are not isolated from signaling streams. If the upper-layer network requires

isolation of media streams from signaling streams, create different traffic streams for the

media streams and signaling streams on the OLT, create different WAN ports on the ONT,

and bind the created WAN ports to

Media Port

and

Signaling Port

.

l

Profile Index

can be set to

Default

,

BT

,

FT

,

KPN

,

PCCW

,

ZTE

, or

BELL

. Choose the

value based on the MGC type.

Profile Index

is set to

Default

(indicating interconnection

with Huawei MGC) in this example. If the settings do not meet requirements, configure

UserDefine

. For details about how to configure this parameter, contact Huawei technical

support.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

158

Page 167 / 364

c.

Click

Apply

to apply the configuration.

4.

Configure parameters of the H.248-based voice users.

a.

In the navigation tree, choose

Voice

>

VoIP User Configuration

.

b.

In the right pane, configure the parameters of voice user 1 as follows:

–

Line Name: A0

–

Associated POTS: 1 (binding port TEL1 on the ONT)

–

Select

Enable Line Name

to enable the voice user configuration.

c.

Click

Apply

to apply the configuration.

d.

In the right pane, click

New

to add voice user 2, and configure the parameters of

voice user 2 as follows:

–

Line Name: A1

–

Associated POTS: 2 (binding port TEL2 on the ONT)

–

Select

Enable Line Name

to enable the voice user configuration.

e.

Click

Apply

to apply the configuration.

NOTE

l

The terminal IDs

A0

and

A1

must be consistent with the corresponding configuration on the

MGC.

l

If

Associated POTS

is

1

, port TEL1 on the ONT is bound. If

Associated POTS

is

2

, port TEL2

on the ONT is bound.

5.

Save the configuration.

In the navigation tree, choose

System Tools

>

Configuration File

. In the right pane,

click

Save Configuration

to save the configuration.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

159

Page 168 / 364

6.

Restart the voice process.

In the navigation tree, choose

Status

>

VoIP Information

. In the right pane, click

Restart VoIP

.

7.

Check the ONT connection status.

In the navigation tree, choose

Status

>

WAN Information

. In the right pane,

Status

is

Connected

and the obtained IP address is displayed at

IP

.

8.

Check the registration status of the voice user.

In the navigation tree, choose

Status

>

VoIP Information

. In the right pane,

User

Status

is

Up

.

l

Configure the ONT on the U2000.

NOTE

Some voice parameters cannot be configured on the NMS but can be configured by importing an XML

configuration file. For details about how to import an XML configuration file, see

3.6.2 Operation Guide

on the XML Configuration File (on the U2000)

.

The following uses batch configurations of creating a value-added service profile of the

ONT as an example. To configure an ONT, on the GPON ONU tab page, select an ONT,

right-click, and choose

Configure Value-Added Service

from the shortcut menu.

1.

Log in to the NMS (iManager U2000 V100R003C00) and start the FTP service.

2.

Configure the value-added service profile of the ONT.

a.

From the main menu, choose

Configuration

>

Access Profile Management

. In

the navigation tree of the tab page that is displayed, choose

PON Profile

>

ONT

VAS Profile

.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

160

Page 169 / 364

b.

On the

ONT VAS Profile

tab page, right-click, and choose

Add

from the shortcut

menu.

c.

In the dialog box that is displayed, set relevant parameters.

–

Profile Name: ONT-VoIP

–

Vendor ID: HWTC(2011)

–

Terminal Type: 247

–

Version: V1R002C06-Later

d.

Configure the parameters of the voice WAN port.

a.

In the navigation tree, choose

WAN Device

>

WAN Device 1

>

WAN

Connection

. Select

WAN Connection

, right-click, and choose

Add IP

Connection

from the shortcut menu.

b.

Select

WAN IP Interface 1

and enter (or select) a proper value.

–

WAN Interface Name: ONT-VoIP

–

WAN Enable: enable

–

Connection Type: IP_Routed

–

VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-

side VLAN ID configured on the OLT.)

–

Priority: 6

–

Addressing Type: DHCP

–

Service List: VOIP (For configuring the VoIP service, VoIP or a

combination containing VoIP needs to be selected.)

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

161

Page 170 / 364

e.

Configure the voice protocol parameters.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service 1

>

Interface configuration

>

Interface 1

. Select

Interface 1

and select a proper

value.

–

Signaling Protocol: H248

–

Region: China

–

Associate WAN Interface: WAN1(ONT-VoIP) (binding the created voice

WAN port)

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

162

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share