Huawei HG8245T Router Manual PDF (Setup & Configuration Guide)

Page 311 / 429 Scroll up to view Page 306 - 310

Figure 4-33

DDNS configuration

2.

Click

Apply

to apply the configuration.

Dynamic domain name service (DDNS) associates a static domain name with the dynamic IP

address of its host.

Assume that server A provides HTTP or FTP service and it is connected to the Internet using

routers. If server A obtains an IP address through DHCP, or server A is connected to the Internet

through PPPoE, PPTP, or L2TP, the IP address is an dynamic IP address. That is, its IP address

may change each time when server A initializes its connection to the Internet.

The mapping between the domain name and IP address provided by the domain name service

(DNS) server is static, and the mapping does not update when the IP address changes. Therefore,

when the IP address of server A changes, users on the Internet cannot access server A with

domain names.

With DDNS, which associates a static domain name with the dynamic IP address of its host,

users on the Internet can access the server only with domain names.

4.8.7 IGMP Configuration

1.

Click the

Network Application

tab and then choose

IGMP Configuration

from the

navigation tree. In the right pane, configure the IGMP parameters, as shown in

Figure

4-34

.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

4 Web Page Reference

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

303

Page 312 / 429

Figure 4-34

IGMP configuration

2.

Click

Apply

to apply the configuration.

The IGMP function of WAN ports can be enabled only when IGMP works in the gateway mode.

Only when IGMP proxy is enabled in the gateway mode, parameters such as

Robustness

,

General query interval

,

General query response time

,

Specific query number

,

Specific

query interval

, and

Specific query response time

.

4.8.8 QoS Configuration

1.

Click the

Network Application

tab and then choose

QoS Configuration

from the

navigation tree. In the right pane, enable/disable QoS and select a QoS mode, as shown in

Figure 4-35

.

Figure 4-35

QoS configuration

2.

Click

Apply

to apply the configuration.

4.8.9 Terminal Limit Configuration

1.

Click the

Network Application

tab and then choose

Terminal Limit Configuration

from

the navigation tree. In the right pane, configure relative parameters, as shown in

Figure

4-36

.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

4 Web Page Reference

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

304

Page 313 / 429

Figure 4-36

Terminal Limit Configuration

2.

Click

Apply

to apply the configuration.

4.9 Voice

This topic describes how to configure the voice service through the Web page.

NOTE

The Web page for configuring the voice service varies with the loaded voice protocols. The following

topics describe the Web pages after the H.248 protocol and the SIP protocol are loaded.

l

Device software version V100R002C00 supports the SIP protocol.

l

Device software version V100R002C01 supports the H.248 protocol.

4.9.1 VoIP Interface Configuration

l

Configuring VoIP Interface - SIP Protocol

1.

In the navigation tree on the left, choose

Voice

>

VoIP Interface Configuration

. In

the pane on the right, parameters of a VoIP interface can be configured, including the

IP addresses of the primary server and secondary server, and digitmap, as shown in

Figure 4-37

.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

4 Web Page Reference

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

305

Page 314 / 429

Figure 4-37

VoIP Interface Configuration - SIP protocol

2.

Click

Apply

to apply the configuration.

Table 4-13

describes the parameters used for configuring a VoIP interface based on the

SIP protocol.

Table 4-13

Parameters used for configuring a VoIP interface based on the SIP protocol

Parameter

Description

Primary Server

Proxy Server Address

Indicates the IP address (provided by the ISP) of the primary

SIP proxy server.

Proxy Server Port

Indicates the ID (provided by the ISP) of the port used for

communication between the primary SIP proxy server and

the VoIP terminal. The ID ranges from 1 to 65535 and the

default ID is 5060.

Secondary Server

Proxy Server Address

Indicates the IP address (provided by the ISP) of the

secondary SIP proxy server.

Proxy Server Port

Indicates the ID (provided by the ISP) of the port used for

communication between the secondary SIP proxy server and

the VoIP terminal. The ID ranges from 1 to 65535 and the

default ID is 5060.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

4 Web Page Reference

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

306

Page 315 / 429

Parameter

Description

General

Home Domain

Indicates the domain of the registration server of the VoIP

terminal in network communications, such as

softx3000.huawei.com.

Local Port

Indicates the ID of the local port on the ONT. The ID ranges

from 1 to 65535 and the default ID is 5060.

Digitmap

Indicates the voice digitmap.

Digitmap Match Mode

Indicates the digitmap matching mode, including Min and

Max.

l

Min: If the dialed character string matches a digitmap

scheme, the system immediately reports the number to

the call proxy.

l

Max: If the dialed character string matches a digitmap

scheme, the system does not immediately report the

number to the call proxy but starts the short timer. If a

user does not continue dialing digits, the system reports

the number to the call proxy after the short timer times

out; if the user continues dialing digits and the number

matches the long digitmap, the system reports the number

that matches the digitmap to the call proxy.

Registration Period

Indicates the valid registration period. When this period

expires, the SIP user needs to register again. The value range

is 1s to 65534s, and the default value is 600s.

Signaling Port

Indicates the signaling WAN port used for connecting the

VoIP terminal to the SIP server.

Media Port

Indicates the WAN port of the voice media streams. When

the name of the media port is empty, it indicates that the name

of the media port is the same as that of the signaling port.

Region

Indicates the country code.

Advance Interface Parameters

Fax Transmode

Indicates the fax mode, including pass-through and T.38.

l

Pass-through: The MG encodes the fax signals

transmitted by a fax machine according to the voice codec

(G.711), and then coverts such signals into the RTP data

packets for real-time transmission over an IP network.

l

T.38: The MG, through ITU-T T.38, converts the T.30-

compliant fax signals transmitted by a fax machine into

the T.38 packets for transmission over an IP bearer

network.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

4 Web Page Reference

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

307

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share