Huawei HG8245H Router Manual PDF (Setup & Configuration Guide)

Page 211 / 232 Scroll up to view Page 206 - 210

5

ONT Downstream User Guide

About This Chapter

This topic describes the configuration flow of the ONT when it is connected to a downstream

TV set, telephone set, STB, PC, Wi-Fi laptop, or USB storage device.

NOTE

Refer to respective operations described in this section according to the type of the terminal connected to

the HG8240/HG8245/HG8247. For details about the terminals that can be connected to the HG8240/

HG8245/HG8247, see

2.2 Typical Network Applications

.

5.1 Using a TV Set

This topic describes the configuration flow of the ONT connected to a downstream TV set.

5.2 Using a STB

This topic describes the configuration flow of the ONT connected to a downstream STB.

5.3 Using a PC

This topic describes the configuration flow of the ONT connected to a downstream PC.

5.4 Using a Telephone Set

This topic describes the configuration flow of the ONT connected to a downstream telephone

set.

5.5 Using a Wi-Fi Laptop

This topic describes the configuration flow of the ONT connected to a Wi-Fi laptop.

5.6 Using a USB Storage Device

This topic describes the configuration flow of the ONT connected to a downstream USB storage

device.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

5 ONT Downstream User Guide

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

5-1

Page 212 / 232

5.1 Using a TV Set

This topic describes the configuration flow of the ONT connected to a downstream TV set.

Procedure

Step 1

Connect a TV set to the ONT.

Connect the CATV port of the ONT to the TV set by using a coaxial cable and make sure that

they are properly connected.

Step 2

Turn on the power supply.

Turn on the power supply of the TV set, and press the POWER button on the ONT. If the POWER

LED is always on, it indicates that the ONT is connected to the power supply.

Step 3

Enjoy the high-speed video service.

Watch programs according to the prompts displayed on the screen of the TV set.

----End

5.2 Using a STB

This topic describes the configuration flow of the ONT connected to a downstream STB.

Procedure

Step 1

Connect a STB to the device.

Connect a LAN port of the ONT to the STB by using the STB cable and make sure that they are

connected properly.

Step 2

Turn on the power supply.

Power on the TV set and the STB and then press the POWER button of the ONT. If the POWER

LED is always on, it indicates that the ONT is connected to the power supply.

Step 3

Configure the IP address of the STB.

There are three methods of configuring the IP address of the STB:

l

Configuring the static IP address

l

Obtaining the IP address dynamically through the DHCP server

l

Obtaining the IP address through the PPPoE dialup

NOTE

The service provider determines the specific method to be adopted.

Step 4

Enjoy the high-speed video service.

Watch programs according to the prompts displayed on the screen of the TV set.

----End

5 ONT Downstream User Guide

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

5-2

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 213 / 232

5.3 Using a PC

This topic describes the configuration flow of the ONT connected to a downstream PC.

Procedure

Step 1

Connect a PC to the device.

Connect a LAN port of the ONT to the PC by using an Ethernet cable and make sure that they

are connected properly.

Step 2

Turn on the power supply.

Power on the PC and then press the POWER button of the ONT. If the POWER LED is always

on, it indicates that the ONT is connected to the power supply.

Step 3

Configure the IP address of the PC.

There are three methods of configuring the IP address of the PC:

l

Configuring the static IP address

l

Obtaining the IP address dynamically through the DHCP server

l

Obtaining the IP address through the PPPoE dialup

NOTE

The service provider determines the specific method to be adopted.

Step 4

Enjoy the high-speed data service.

Run the Internet Explorer and input correct Web site addresses to browse Web pages.

NOTE

The working parameters of the ONT are configured by the service provider remotely. Hence, the ONT

supports plug and play (PnP) and requires no configuration on the user side.

----End

5.4 Using a Telephone Set

This topic describes the configuration flow of the ONT connected to a downstream telephone

set.

Procedure

Step 1

Connect a telephone set to the device.

Connect the TEL port of the ONT to the telephone set by using a telephone cable and make sure

that they are connected properly.

Step 2

Turn on the power supply.

Press the POWER button on the ONT. If the POWER LED is always on, it indicates that the

ONT is connected to the power supply.

Step 3

Enjoy the high-quality voice service.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

5 ONT Downstream User Guide

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

5-3

Page 214 / 232

After picking up the telephone, dial the callee number, and wait for the callee to answer the

telephone.

----End

5.5 Using a Wi-Fi Laptop

This topic describes the configuration flow of the ONT connected to a Wi-Fi laptop.

Procedure

Step 1

Turn on the power supply.

Turn on the power supply of the Wi-Fi laptop, and press the POWER button on the ONT. If the

POWER LED is always on, it indicates that the ONT is connected to the power supply.

Step 2

Enable the Wi-Fi function on the ONT.

Press the WLAN button. If the WLAN LED is always on, it indicates that the Wi-Fi function is

enabled. By default, the Wi-Fi function is enabled.

Step 3

Configure the Wi-Fi parameters of the laptop, including the following:

l

Wireless network name (SSID)

l

Wireless network key

NOTE

The service provider determines the parameters to be configured.

Step 4

If WPS is adopted as the encryption mode for the STA (Wi-Fi laptop) to request access to the

wireless network, press the WPS button on the side panel of the ONT and press the WPS button

on the laptop (or run the WPS program installed on the laptop) within two minutes.

Step 5

Enjoy the high-speed data service.

Run the Internet Explorer and input correct Web site addresses to browse Web pages.

NOTE

l

A Wi-Fi Ethernet card must be installed on the laptop.

l

The working parameters of the ONT are configured by the service provider remotely. Hence, the

ONT supports plug and play (PnP) and requires no configuration on the user side.

----End

5.6 Using a USB Storage Device

This topic describes the configuration flow of the ONT connected to a downstream USB storage

device.

Procedure

Step 1

Turn on the power supply.

Press the POWER button on the ONT. If the POWER LED is always on, it indicates that the

ONT is connected to the power supply.

Step 2

Connect a USB storage device to the ONT.

5 ONT Downstream User Guide

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

5-4

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 215 / 232

Connect the USB port of the ONT to the USB storage device by using a USB data cable and

make sure that they are properly connected.

Step 3

Log in to the ONT Web page on a PC. Then, configure associated USB parameters. For

details ,see

6.3.6 USB LED Off

. After the configuration is complete, you can download files

through the ONT.

----End

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

5 ONT Downstream User Guide

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

5-5

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share