Huawei HG8245H Router Manual PDF (Setup & Configuration Guide)

Page 196 / 232 Scroll up to view Page 191 - 195

Figure 4-95

Configuring the TID of H.248 voice user 1

2.

Configure the TID of H.248 voice user 2 in the same way.

Choose

InternetGatewayDevice

>

Service

>

VoiceService

>

1

>

VoiceProfile

>

1

>

Line

from the navigation tree. Click

Add

in the lower left part. Choose

2

>

X_HW_H248

from the navigation tree. In the right pane, set

LineName

to

A1

, indicating

that the TID of H.248 voice user 2 is A1. The user telephone number set on the MGC is

88001235.

Figure 4-96

shows how to configure the TID of H.248 voice user 2.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-110

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 197 / 232

Figure 4-96

Configuring the TID of H.248 voice user 2

Step 7

Restart the voice process.

Choose

InternetGatewayDevice

>

Services

>

VoiceService

>

1

>

VoiceProfile

>

1

from the

navigation tree. In the right pane, set

Reset

to

1

, indicating that the voice process will be restarted.

Figure 4-97

shows how to restart the voice process.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-111

Page 198 / 232

Figure 4-97

Restarting the voice process

Step 8

Click

OK

after the configuration.

----End

Result

User 1 with telephone number

88001234

can call user 2 with telephone number

88001235

, and

the communication between them is normal. The same is true when user 2 calls user 1.

NOTE

The termination IDs of line 1 and line 2 configured on the MGC correspond to telephone numbers

88001234

and

88001235

respectively.

4.7 Configuring the Wi-Fi Access Service

This topic provides an example of how to configure the Wi-Fi access service.

4.7.1 Data Plan

This topic provides the typical data plan for configuring the Wi-Fi access service to make good

preparations for the configuration.

4.7.2 Configuration Flowchart

This topic shows the flowchart for configuring the Wi-Fi access service.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-112

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 199 / 232

4.7.3 Configuration Method

The Wi-Fi access service can be configured through the Web page or TR-069 server.

4.7.1 Data Plan

This topic provides the typical data plan for configuring the Wi-Fi access service to make good

preparations for the configuration.

Table 4-9

provides the data plan for configuring the Wi-Fi access service.

Table 4-9

Data plan for configuring the Wi-Fi access service

Parameter

Data

Description

Service type of

the WAN

interface

INTERNET

When

Connection mode

is set to

Route

, you can

select Internet, TR069, VoIP, or a combination of

them.

When configuring the Wi-Fi access service, you

need to select only Internet or a combination with

Internet. In this example, Internet is selected.

Connection

mode

Route

It can be set to route or bridge. In this example, route

is selected.

VLAN ID of the

WAN interface

300

The VLAN ID of the WAN interface must be the

same as the VLAN ID of the traffic streams

configured on the OLT.

Mode of

obtaining an IP

address

PPPoE

l

User name:

iadtest@pppoe

l

Password:

iadtest

There are three modes to obtain an IP address.

l

DHCP: Obtain an IP address dynamically.

l

Static: Configure an IP address manually.

l

PPPoE: Access in the PPPoE dialup mode.

In this example, the PPPoE mode is selected. You

can also choose the DHCP or static mode according

to the data plan of the upper-layer network. When

the PPPoE mode is selected, the configured user

name and password must be the same as those

planned on the BRAS.

802.1p

1

The larger the service priority value, the higher the

service priority. The priorities must be the same as

those planned on the OLT, that is, the priority

sequence is the voice service, multicast service, and

Internet access service/Wi-Fi service in a descending

order.

NAT function

Enable

Enable the network address translation (NAT)

function.

Port binding

SSID1

-

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-113

Page 200 / 232

Parameter

Data

Description

DHCP function

Enable

The PC connected to port LAN2 obtains an IP

address from the DHCP address pool configured on

the ONT. By default, the DHCP function is enabled

and need not be configured.

SSID1

ChinaNet-huawei

Indicates the wireless network, which is used to

differentiate the different networks when a user

accesses the network.

Security mode

WPA Pre-Shared

Key

The network security mode includes Open, Shared,

WPA Pre-Shared Key, WPA2 Pre-Shared Key,

WPA Enterprise, WPA2 Enterprise, and Wi-Fi

Protected Setup.

WPA

encryption

mode

TKIP&AES

Key: chinahuawei

The WPA encryption mode includes TKIP, AES,

and TKIP&AES.

4.7.2 Configuration Flowchart

This topic shows the flowchart for configuring the Wi-Fi access service.

Figure 4-98

shows the flowchart for configuring the Wi-Fi access service through the Web page.

Figure 4-98

Flowchart for configuring the Wi-Fi access service through the Web page

Figure 4-99

shows the flowchart for configuring the Wi-Fi access service through the TR-069

server.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-114

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share