Huawei HG8245H Router Manual PDF (Setup & Configuration Guide)

Page 141 / 232 Scroll up to view Page 136 - 140

Figure 4-43

Configuring the PPPoE user name and password

Step 10

Click

OK

. In the dialog box that is displayed, click

OK

. Then, the configuration takes effect

after the device automatically restarts.

----End

Result

The PC obtains the IP addresses automatically. After the PPPoE dialup is successfully performed

on the ONT, the PC can automatically obtain the IP addresses allocated by the ONT through

DHCP. Then, the Internet access service is provisioned after websites are entered into Internet

Explorer (IE) address bars of the PC.

Configuring the Internet Access Service Through the TR-069 Server

This topic provides an example of how to configure the Internet access service through the

TR-069 server.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-55

Page 142 / 232

Prerequisite

l

ONT must be added or auto-discovered on the OLT and associated service streams must

be configured on the OLT. For details, see

4.2.1 Commissioning the Interoperation

Between OLT and ONT (Through CLI of the OLT)

or

4.2.2 Commissioning the

Interoperation Between OLT and ONT (Through the NMS)

.

l

ONT must be auto-discovered on the TR-069 server. For details, see

4.2.3 Commissioning

Interoperation Between the TR-069 Server and the ONT Through the Web Page

or

4.2.4 Commissioning Interoperation Between the TR-069 Server and the ONT

Through the NMS

.

l

A PC is connected to port LAN2 on the ONT. The IP address of the PC is allocated by the

DHCP server (the ONT). PPPoE dialup is performed on the ONT to implement the L3

Internet access service of the PC.

Context

l

This topic describes how to configure only L3 Internet access service. For L2 Internet access

service, configuration is not required on the ONT but on the OLT. For details, see

4.2.1

Commissioning the Interoperation Between OLT and ONT (Through CLI of the

OLT)

or

4.2.2 Commissioning the Interoperation Between OLT and ONT (Through

the NMS)

.

l

Every data change must be saved. You can click

Save

in a window to save data changes.

If you navigate to another node without saving data changes, a dialog box will be displayed

prompting you to save the data changes. In this case, click

YES

in the dialog box. New

data will be automatically applied to the ONTs after the data changes are saved.

CAUTION

When configuring services on the TR-069 server, do not modify the WAN interface connecting

the TR-069 server and the ONT. Otherwise, the TR-069 server loses communication with the

ONT.

Procedure

Step 1

Log in to the TR-069 server and choose

Subnet View

>

TR069 Subnet

from the navigation

tree. In the terminal list, right-click an ONT and choose

Tools

>

Configure in Real Time

from

the shortcut menu.

Step 2

In the

Configure in Real Time

dialog box, set

Root Node

to

Internet gateway device

.

Step 3

Configure the working mode of a LAN port.

Choose

InternetGatewayDevice

>

LANDevice

>

1

>

LANEthernetInterfaceConfig

>

2

from

the navigation tree. In the right pane, set

X_HW_L3Enable

to

1

, indicating that port LAN2

works in the L3 mode.

Figure 4-44

shows how to configure the working mode of a LAN port.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-56

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 143 / 232

Figure 4-44

Configuring the working mode of a LAN port

NOTE

l

When

X_HW_L3Enable

is set to

0

, it indicates that the corresponding LAN port works in the L2

mode.

l

When

X_HW_L3Enable

is set to

1

, it indicates that the corresponding LAN port works in the L3

mode.

By default,

X_HW_L3Enable

is set to

0

.

Step 4

Configure the parameters of the WAN interface.

1.

Choose

InternetGatewayDevice

>

WANDevice

>

1

>

WANConnectionDevice

from the

navigation tree. Click

Add

in the lower left part to create an instance.

2.

Choose

2

>

WANPPPConnection

from the navigation tree and click

Add

in the lower left

part. Choose the new

1

branch from the navigation tree. In the right pane, set parameters

as follows:

l

Set

Enable

to

1

, indicating that the WAN connection is enabled.

l

Set

Connection Type

to

IP_Routed

, indicating that the connection type of the WAN

interface is in routing mode.

l

Set

NATEnable

to

1

, indicating that the NAT function is enabled.

l

Set

Username

to

iadtest@pppoe

and

Password

to

iadtest

, indicating that the PPPoE

user name is

iadtest@pppoe

and the password is

iadtest

.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-57

Page 144 / 232

l

Set

X_HW_SERVICELIST

to

INTERNET

, indicating that the WAN interface

provides Internet access.

l

Set

X_HW_VLAN

to

150

, indicating the VLAN ID of the WAN interface is 150.

l

Set

X_HW_PRI

to

1

, indicating the priority level of the WAN interface is 1.

NOTE

l

If the WAN interface obtains IP addresses in static or DHCP mode, choose

WANIPConnection

to

set the parameters of the WAN interface.

l

If the WAN interface obtains IP addresses in PPPoE mode, choose

WANPPPConnection

to set the

parameters of the WAN interface.

Figure 4-45

shows how to configure the parameters of the WAN interface.

Figure 4-45

Configuring the parameters of the WAN interface

Step 5

Bind a LAN port.

Choose

1X_HW_LANBIND

from the navigation tree. In the right pane, set

Lan2Enable

to

1

to bind the WAN interface to LAN port 2.

Figure 4-46

shows how to bind a LAN port.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-58

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 145 / 232

Figure 4-46

Binding a LAN port

Step 6

Click

OK

after the configuration.

----End

Result

The PC obtains the IP addresses automatically. After the PPPoE dialup is successfully performed

on the ONT, the PC can automatically obtain the IP addresses allocated by the ONT through

DHCP. Then, the Internet access service is provisioned after websites are entered into Internet

Explorer (IE) address bars of the PC.

4.5 Configuring a SIP-based Voice Service

This topic provides an example of how to configure the SIP-based voice service.

4.5.1 Data Plan

This topic provides the typical data plan for configuring the SIP-based voice service to make

good preparations for the configuration.

4.5.2 Configuration Flowchart

This topic provides the flowchart for configuring the SIP-based voice service.

4.5.3 Configuration Method

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-59

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share