Huawei HG8245H Router Manual PDF (Setup & Configuration Guide)

Page 131 / 232 Scroll up to view Page 126 - 130

Parameter

Data

Description

Mode of

obtaining an IP

address

PPPoE

l

User name:

iadtest@pppoe

l

Password:

iadtest

There are three modes to obtain an IP address:

l

DHCP: Obtain an IP address dynamically.

l

Static: Configure an IP address manually.

l

PPPoE: Access in the PPPoE dialup mode.

In this example, the PPPoE mode is selected. You

can also choose the DHCP or static mode according

to the data plan of the upper-layer network. When

the PPPoE mode is selected, the configured user

name and password must be the same as those

planned on the BRAS.

802.1p

1

The larger the priority value, the higher the priority.

The priorities are the same as those planned on the

OLT, that is, the priority sequence is the voice

service, multicast service, and Internet access

service/Wi-Fi in a descending order.

NAT function

Enable

Enable the network address translation (NAT)

function.

Port binding

LAN2

The WAN interface is bound to port LAN2

connected to the PC. The PC can access the

Internet.

DHCP function

Enable

The PC connected to port LAN2 obtains an IP

address from the DHCP address pool configured

on the ONT. By default, the DHCP function is

enabled and need not be configured.

4.4.2 Configuration Flowchart

This topic shows the flowchart for configuring the L3 Internet access service.

Figure 4-32

shows the flowchart for configuring the L3 Internet access service through the Web

page.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-45

Page 132 / 232

Figure 4-32

Flowchart for configuring the Internet access service through the Web page

Figure 4-33

shows the flowchart for configuring the L3 Internet access service through the

N2000 BMS.

Figure 4-33

Flowchart for configuring the Internet access service through the N2000 BMS

Figure 4-34

shows the flowchart for configuring the L3 Internet access service through the

TR-069 server.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-46

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 133 / 232

Figure 4-34

Flowchart for configuring the L3 Internet access service through the TR-069 server

4.4.3 Configuration Method

The Internet access service can be configured through the Web page, N2000 BMS, or TR-069

server.

Configuring the Internet Access Service Through the Web Page

This topic provides an example of how to configure the Internet access service through the Web

page.

Prerequisite

l

ONT must be added or auto-discovered on the OLT and associated service streams must

be configured on the OLT. For details, see

4.2.1 Commissioning the Interoperation

Between OLT and ONT (Through CLI of the OLT)

or

4.2.2 Commissioning the

Interoperation Between OLT and ONT (Through the NMS)

.

l

The environment for service configuration on the Web page must be available and you

must be logged into the Web page successfully. For details, see

3.2 Logging In Through

the Web Page

.

l

A PC is connected to port LAN2 on the ONT. The IP address of the PC is allocated by the

DHCP server (the ONT). PPPoE dialup is performed on the ONT to implement the L3

Internet access service of the PC.

Context

NOTE

This topic describes how to configure only L3 Internet access service. For L2 Internet access service,

configuration is not required on the ONT but on the OLT. For details, see

4.2.1 Commissioning the

Interoperation Between OLT and ONT (Through CLI of the OLT)

or

4.2.2 Commissioning the

Interoperation Between OLT and ONT (Through the NMS)

.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-47

Page 134 / 232

Procedure

Step 1

Configure the working mode of a LAN port.

1.

In the navigation tree on the left, choose

LAN

>

LAN Port Work Mode

. Select the check

boxes of LAN 2 to set port LAN2 to work in the L3 mode.

Figure 4-35

shows how to configure the working mode of a LAN port.

Figure 4-35

Configuring the working mode of a LAN port

2.

Click

Apply

.

Step 2

Configure the parameters of the WAN interface.

1.

In the navigation tree on the left, choose

WAN

>

WAN Configuration

.

2.

In the pane on the right, click

New

. In the dialog box that is displayed, set the parameters

of the WAN interface as follows:

l

Select

Enable

next to

NewWanConnction

to enable the WAN connection that is newly

set up.

l

Set

Service List

to

INTERNET

.

l

Set

Mode

to

Route

.

l

Set

VLAN ID

to

150

.

l

Set

802.1p

to

1

.

l

Set

IP Acquisition Mode

to

PPPoE

.

l

Select

Enable

next to

NAT

to enable the NAT function.

l

Set

User Name

to

iadtest@pppoe

and

Password

to

iadtest

.

l

Select the check box of

LAN2

in

Binding options

, indicating that the WAN interface

is bound to LAN2.

Figure 4-36

shows how to configure the parameters of the WAN interface.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-48

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 135 / 232

Figure 4-36

Configuring the parameters of the WAN interface

3.

Click

Apply

.

Step 3

Save the configuration.

Choose

System Tools

>

Configuration File

from the navigation tree. In the right pane, click

Save Configuration

, as shown in

Figure 4-37

.

Figure 4-37

Saving the configuration

----End

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-49

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share