Page 71 / 232 Scroll up to view Page 66 - 70
Dynamic domain name service (DDNS) associates a static domain name with the dynamic IP
address of its host.
Assume that server A provides HTTP or FTP service and it is connected to the Internet using
routers. If server A obtains an IP address through DHCP, or server A is connected to the Internet
through PPPoE, PPTP, or L2TP, the IP address is an dynamic IP address. That is, its IP address
may change each time when server A initializes its connection to the Internet.
The mapping between the domain name and IP address provided by the domain name service
(DNS) server is static, and the mapping does not update when the IP address changes. Therefore,
when the IP address of server A changes, users on the Internet cannot access server A with
domain names.
With DDNS, which associates a static domain name with the dynamic IP address of its host,
users on the Internet can access the server only with domain names.
IGMP Configuration
1.
Click the
Network Application
tab and then choose
IGMP Configuration
from the
navigation tree. In the right pane, configure the IGMP parameters, as shown in
Figure
3-33
.
Figure 3-33
IGMP configuration
2.
Click
Apply
.
The IGMP function of WAN ports can be enabled only when IGMP works in the gateway mode.
Only when IGMP proxy is enabled in the gateway mode, parameters such as
Robustness
,
General query interval
,
General query response time
,
Specific query number
,
Specific
query interval
, and
Specific query response time
.
QoS Configuration
1.
Click the
Network Application
tab and then choose
QoS Configuration
from the
navigation tree. In the right pane, enable/disable QoS and select a QoS mode, as shown in
Figure 3-34
.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration Guide
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-33
Page 72 / 232
Figure 3-34
QoS configuration
2.
Click
Apply
.
Terminal Limit Configuration
1.
Click the
Network Application
tab and then choose
Terminal Limit Configuration
from
the navigation tree. In the right pane, configure relative parameters, as shown in
Figure
3-35
.
Figure 3-35
Terminal Limit Configuration
2.
Click
Apply
.
3.3.9 Voice
This topic describes how to configure the voice service through the Web page.
NOTE
The Web page for configuring the voice service varies with the loaded voice protocols. The following
topics describe the Web pages after the H.248 protocol and the SIP protocol are loaded.
l
Device software version V100R002C00 supports the SIP protocol.
l
Device software version V100R002C01 supports the H.248 protocol.
3 Configuration Guide
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-34
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 73 / 232
VoIP Interface Configuration
l
Configuring VoIP Interface - SIP Protocol
1.
Click the
Voice
tab and then choose
VoIP Basic Configuration
from the navigation
tree. In the pane on the right, parameters of a VoIP interface can be configured,
including the IP addresses of the primary server and secondary server, and digitmap,
as shown in
Figure 3-36
.
Figure 3-36
VoIP Interface Configuration - SIP protocol
2.
Click
Apply
.
Table 3-13
describes the parameters used for configuring a VoIP interface based on the
SIP protocol.
Table 3-13
Parameters used for configuring a VoIP interface based on the SIP protocol
Parameter
Description
Primary Server
Proxy Server Address
Indicates the IP address (provided by the ISP) of the primary
SIP proxy server.
Proxy Server Port
Indicates the ID (provided by the ISP) of the port used for
communication between the primary SIP proxy server and
the VoIP terminal. The ID ranges from 1 to 65535 and the
default ID is 5060.
Secondary Server
Proxy Server Address
Indicates the IP address (provided by the ISP) of the
secondary SIP proxy server.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration Guide
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-35
Page 74 / 232
Parameter
Description
Proxy Server Port
Indicates the ID (provided by the ISP) of the port used for
communication between the secondary SIP proxy server and
the VoIP terminal. The ID ranges from 1 to 65535 and the
default ID is 5060.
General
Home Domain
Indicates the domain of the registration server of the VoIP
terminal in network communications, such as
softx3000.huawei.com.
Local Port
Indicates the ID of the local port on the ONT. The ID ranges
from 1 to 65535 and the default ID is 5060.
Digitmap
Indicates the voice digitmap.
Digitmap Match Mode
Indicates the digitmap matching mode, including Min and
Max.
l
Min: If a short digitmap is matched, the system
immediately reports the number to the call proxy.
l
Max: If a short digitmap is matched, the system does not
immediately report the number to the call proxy but starts
the short timer. If a user does not continue dialing digits,
the system reports the number to the call proxy after the
short timer times out; if the user continues dialing digits
and the number matches the long digitmap, the system
reports the number that matches the digitmap to the call
proxy.
Region
Indicates the country code.
Signaling Port Name
Indicates the signaling WAN interface used for connecting
the VoIP terminal to the SIP server.
l
VoIP Interface Configuration - H.248 Protocol
1.
In the navigation tree on the left, choose
Voice
>
VoIP Interface Configuration
. In
the pane on the right, parameters of a VoIP interface can be configured, including the
primary MGC server, secondary MGC server, and digitmap, as shown in
Figure
3-37
.
3 Configuration Guide
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-36
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 75 / 232
Figure 3-37
VoIP Interface Configuration - H.248 protocol
2.
Click
Apply
.
Table 3-14
describes parameters used for configuring a VoIP interface based on the H.248
protocol.
Table 3-14
Parameters used for configuring a VoIP interface based on the H.248 protocol
Parameter
Description
Primary Server
MGC Address
Indicates the IP address (provided by the ISP) of the primary
MGC server.
MGC Port
Indicates the ID (provided by the ISP) of the port used for
communication between the primary MGC server and the
VoIP terminal. The ID ranges from 1 to 65535 and the default
ID is 2944.
Secondary Server
MGC Address
Indicates the IP address (provided by the ISP) of the
secondary MGC server.
MGC Port
Indicates the ID (provided by the ISP) of the port used for
communication between the secondary MGC server and the
VoIP terminal. The ID ranges from 1 to 65535 and the default
ID is 2944.
General
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration Guide
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-37

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top